1. 서론
The CADDXFPV Eclipse Thermal Camera is an advanced thermal imaging solution designed for various applications, including FPV (First Person View) drones. This manual provides essential information for the proper setup, operation, and maintenance of your thermal camera system. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
2. 안전 정보
- Do not expose the camera to extreme temperatures, direct sunlight for prolonged periods, or corrosive environments.
- 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
- 올바른 볼륨 확인tage is supplied to the device as specified in the 'Specifications' section. Incorrect voltag영구적인 손상을 일으킬 수 있습니다.
- 장치를 물과 습기로부터 멀리하십시오.
- Do not attempt to disassemble or modify the camera system. This will void the warranty and may cause damage.
- Use only original or approved accessories.
3. 구성 요소 이상view
The CADDXFPV Eclipse Thermal Camera system typically includes the following main components:
- Thermal Camera Module: The primary unit responsible for capturing thermal images.
- Main Processing Unit: Handles video processing, power management, and interfaces.
- 안테나 : For video transmission (if applicable to your specific variant).
- 연결 케이블: For power, video, and data transmission between modules.
4. 사양
The following specifications apply to the Eclipse Camera-640HD model. Specifications may vary slightly for other variants (384, 256).
| 특징 | 세부 사항 |
|---|---|
| 검출기 유형 | 냉각되지 않은 바나듐 산화물 |
| 해결 | 256x192@12µm |
| 파장 범위 | 8 ~ 14μm |
| NETD | ≤40mk @ F1 25°C |
| 렌즈 | F1.0/4mm/50°(H)*37.2°(V)*62.3°(D) |
| 프레임 속도 | 50fps |
| 전력 소비 | <1.5w |
| 산출 | 단짝 |
| 공급량tage | 5v~20v |
| 렌즈 | 4mm |
| 작동 온도 | -20℃~60℃ |
| 아날로그 인터페이스 | 영어: CVBS(미국) |
| HD 인터페이스 | MIPI-CSI/Walksnail Avatar |
| 숨어 있음 | 평균 지연 시간 20ms |
| 이미지 품질 | AI 이미지 향상 |
| 재료 | 스테인리스 스틸 |
| 제어 가능한 거리 | 200~800 (units not specified, typically meters for FPV) |
5. 설정 및 배선
Carefully follow the wiring diagrams below to connect your CADDXFPV Eclipse Thermal Camera system. Incorrect wiring can damage the device and connected components.
5.1 UART 연결
This connection is typically used for data communication, such as OSD (On-Screen Display) control or flight controller integration.
| 핀 | 기능 |
|---|---|
| TX2 | UART Transmit 2 |
| RX2 | UART Receive 2 |
| 접지 | 지면 |
| 5V0 | 5V 전원 출력 |
5.2 Main Power and Video Output
This connection provides power to the unit and outputs the video signal. Ensure the power supply is within the specified voltag전자 범위(9V-26V).
| 핀 | 기능 |
|---|---|
| 영어: CVBS(미국) | 아날로그 비디오 출력 |
| Power 9V-26V | Main Power Input (9V to 26V) |
| 접지 | 지면 |
| OSD | 온스크린 디스플레이 제어 |
| V-버스 | 권tage Bus (Power Output) |
메모: Always double-check your wiring before applying power to prevent damage to the camera or other electronic components.
6. 사용 설명서
6.1 전원 켜기
Once correctly wired, apply power within the specified voltage range (5V-20V for the camera module, 9V-26V for the main unit). The system should initialize, and thermal video output will be available via the CVBS (Analog) or MIPI-CSI/Walksnail Avatar (HD) interfaces.
6.2 비디오 출력
The camera outputs a PAL video signal. Ensure your display device or video receiver is compatible with PAL format. The HD interface supports MIPI-CSI and Walksnail Avatar systems for high-definition thermal video.
6.3 열화상 촬영
The camera utilizes an uncooled vanadium oxide detector to capture thermal radiation. The AI Image Enhancement feature helps improve the clarity and detail of the thermal feed. The latency is approximately 20ms, providing a responsive experience for FPV applications.
7. 유지관리
- 청소: Gently clean the camera lens and housing with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- 저장: 카메라를 서늘하고 건조한 곳에 보관하고 직사광선과 극한 온도 변화를 피하십시오.
- 점검: 케이블과 커넥터에 마모나 손상 징후가 있는지 정기적으로 검사하십시오.
8. 문제 해결
- 전원 없음: Check all power connections and ensure the supply voltage is within the specified range (9V-26V for the main unit). Verify that the power source is functioning correctly.
- 비디오 출력 없음: Confirm that the video output cable (CVBS or HD interface) is securely connected to your display device or video receiver. Ensure your display is set to the correct input and supports PAL format for analog output.
- 이미지 품질이 좋지 않음: Check for any obstructions on the camera lens. Ensure the camera is operating within its specified temperature range (-20°C to 60°C).
- 간헐적 신호: Inspect antenna connections for tightness and ensure they are not damaged. Check for potential interference sources in your operating environment.
9. 사용자 팁
- For optimal thermal performance, allow the camera a few moments to stabilize after powering on, especially in varying ambient temperatures.
- Experiment with different mounting positions on your drone or platform to find the best field of view and minimize vibrations.
- Keep the lens clean to ensure clear thermal imagery. Dust or smudges can significantly degrade performance.
- When using the HD interface, ensure your digital FPV system (e.g., Walksnail Avatar) is updated to the latest firmware for best compatibility and features.
10. 보증 및 지원
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to the CADDXFPV customer service channels.
11. 연락처 정보
For further assistance or inquiries, please contact CADDXFPV customer support through their official web사이트 또는 공인 대리점.