Hippcron Carplay Car Radio 1DIN Android Auto Multimedia Player

중요한 안전 정보

Please read all instructions carefully before installation and operation. It is highly recommended that this machine be installed by a certified car audio professional.

• This machine is designed for vehicles with a 12V power supply system (the ground wire must be grounded). Do not install in 24V vehicles, as this will damage the unit.
• Do not attempt to repair the power fuse without professional guidance. Improper fuse use can cause damage or fire.
• For safety and legal reasons, drivers must not watch videos while driving.
• Avoid placing the product in humid environments or near water to prevent electric shock or other damage.
• 나중에 참조할 수 있도록 이 설명서를 항상 보관하십시오.
• 마른 천으로만 기기를 청소하십시오.
• Do not use or operate the unit near water.
• 안전 기능을 무력화하지 마십시오.

주의: 기기가 타는 것을 방지하기 위해 전원 코드가 제대로 연결될 때까지 전원을 켜지 마십시오!

Image: Important reminder to remove the protective film from the back of the unit to ensure proper heat dissipation.

Please remove the protective film from the back of the unit. Retaining the plastic film will affect the machine's heat dissipation performance.

설정 및 설치

사전 설치 테스트

본격적인 설치 전에 간단한 테스트를 수행하여 장치가 올바르게 작동하는지 확인하십시오.

1. 차량용 스테레오의 빨간색과 노란색 전선을 하나로 합쳐 배터리의 양극에 연결하세요.
2. 검은색 전선을 배터리의 음극에 연결하세요.
3. 약 2초 후 차량용 스테레오 화면에 불이 들어오는지 확인하십시오. 화면이 켜지면 기기가 정상적으로 작동하는 것입니다.

Image: Partial Wiring Display for Power Test, showing connections for Red (+12V Ignition Switch), Black (Power Negative), and Yellow (Power Positive) to a 12V battery and ignition.

뒤쪽 View 카메라 테스트 (선택 사항)

만약 당신이 뒷부분을 가지고 있다면 view camera, test it after the main unit test:

1. Maintain the Step 1 power connections.
2. 차량용 스테레오의 분홍색 선을 뒷좌석 상단의 빨간색 선에 연결하세요. view 카메라.
3. 뒷쪽의 가운데 빨간색 선과 맨 아래쪽 빨간색 선을 합치세요. view camera and connect them to the positive pole of the battery (where the red and yellow wires of the stereo are connected).
4. 뒷면의 검은색 전선을 연결하세요 view camera to the negative pole of the battery (where the black wire of the stereo is connected).
5. If the camera lights up and the car stereo shows the reverse image, the camera is functioning correctly.

배선도 참조

The specific wiring may vary; always refer to the actual product and included paper manual for precise connections. Ensure speaker lines are carefully checked for grounding or touching to prevent damage or sound issues. Positive and negative power supply terminals must not touch or short circuit.

Example 1: General Wiring

This diagram illustrates connections for left/right speakers, external display, external video source, rear view camera, FM radio, USB DVR (optional), and microphone. The main harness includes:

• 빨간색: ACC (점화 스위치 +12V)
• 검정색: GND (접지선 B-)
• Blue: ANT (Auto Antenna Power)
• Green: ILL (Headlight control line)
• Brown: KEY1 (Steering wheel controls)
• Yellow: B+ (Power Supply +12V)
• Orange: Parking single check
• Pink: Parking Sensor Control Wires

Speaker connections are also detailed:

• Green: Rear Left Speaker+
• Green/Black: Rear Left Speaker-
• 흰색: 전면 왼쪽 스피커+
• White/Black: Front Left Speaker-
• Gray: Front Right Speaker+
• Gray/Black: Front Right Speaker-
• Purple: Rear Right Speaker+
• Purple/Black: Rear Right Speaker-

Example 2: Alternative Wiring

This diagram provides an alternative wiring setup, including connections for external display, rear view camera, left/right speakers, FM radio, USB DVR (optional), and microphone. Key connections include:

• Orange: ILL (Illuminate Backlight)
• Orange/Black: Steering Wheel Control (2)
• Pink: Reversing Camera Wires
• Brown: Brake Detect
• Red: +12V Ignition switch
• Blue: Auto Antenna
• Green/Black: Rear Left Speaker-
• Green: Rear Left Speaker+
• Purple/Black: Rear Right Speaker-
• Purple: Rear Right Speaker+
• White/Black: Front Left Speaker-
• 흰색: 전면 왼쪽 스피커+
• Gray/Black: Front Right Speaker-
• Gray: Front Right Speaker+
• 검정색: 접지선 (B-)
• 노란색: +12V 상시 전원 공급 장치(B+)

Image: Detailed Wiring Diagram, illustrating 16 numbered wires with their functions and corresponding colors. If colors differ, refer to the paper manual.

기계 설치

The car stereo has a universal size suitable for most cars. Installation methods include:

1. 나사 고정 설치: Secure the unit using screws.
2. 카드 위치 고정 설치: Install by aligning with card slots.
3. 특수 프레임 고정 설치: Use a dedicated frame for installation.

If the unit does not fit your car, you may need aftermarket accessories such as a double DIN dash kit, wire harness, or antenna adapter specific to your car's year, make, and model. Alternatively, you might need to modify your car's original frame.

뒤쪽 View 카메라 배선(선택 사항)

후면을 사용할 때 view reversing function, the system will automatically disconnect mobile phone links (calls, BT music, mirroring). This is normal behavior.

Note: Whether you use a reversing camera or not, connect the reversing cable. Otherwise, your Wi-Fi and Bluetooth signals may be affected!

배선 단계:

1. Connect the reversing trigger line (Back (A6)) to the reversing line in the power harness.
2. Connect the red wire from the camera to the positive pole of the reverse light cable.
3. Connect the camera's ground wire to GND.
4. Connect the camera's power cable to the + Reversing light Cable.
5. Connect the video output from the camera to the video input on the monitor.

After installation, start the engine and engage reverse gear. Check if the monitor automatically displays the rear view 이미지가 표시되지 않으면 설치를 다시 확인하십시오.

후방 조정view camera angle to ensure the rear bumper is clearly visible, ideally occupying 5% of the screen image. Then, lock the lens bracket screws.

Image: Common Post-sales Inquiries: Troubleshooting for 'No Signal' or 'Reversing' issues, showing various screen states and a wiring diagram for the pink 'back/reversing line' to disconnect if problems occur.

작동 지침

제품 끝view and Panel Functions

이 제품은 HD 터치스크린을 탑재하고 있으며 다양한 멀티미디어 기능을 지원합니다.

Image: Hippcron Carplay Car Radio with 7-inch Touch Screen, showing main interface with apps like Maps, Music, Phone, and including optional accessories like camera and remote control.

Image: Panel Functions diagram, labeling the physical buttons and ports on the left side of the car radio: MIC, RES, Power Key, Volume Increase/Reduction, SD Card, AUX, USB IR.

Left Panel Functions:

• 마이크: 내장형 마이크 ​​구멍.
• 자원: 리셋 버튼(뾰족한 물체로 누르세요).
• 전원 키: Press long to turn on/off; short press to enter switch mode.
• 볼륨 증가(+): 볼륨을 높이세요.
• 부피 감소(-): 볼륨을 낮추세요.
• SD 카드: Slot for TF card.
• 보조: 외부 오디오 입력 잭.
• USB IR: USB 2.0 port, supports TF card and USB flash disk for audio/video input, and phone charging.

Common Icon Functions (Video and Music):

• 홈 버튼: 홈 화면으로 돌아갑니다.
• 다음 노래: 다음 트랙으로 건너뜁니다.
• 무작위 패턴: 재생 순서를 섞으세요.
• 단일/목록 루프: 현재 재생 중 또는 재생 목록을 반복합니다.
• 빠른 역방향 함수: 되감기.
• EQ : 이퀄라이저 설정 바로가기 키입니다.
• 일시 정지/재생: 재생을 일시 중지하거나 다시 시작합니다.
• 리턴 키: 이전 화면으로 돌아갑니다.

Machine Host Icons:

• 마지막 노래: 이전 트랙으로 이동합니다.
• 다음 노래: 다음 트랙으로 이동합니다.
• 볼륨+ / 볼륨-: 볼륨을 조절하세요.
• Screen pop-up/screen stow: 전동식 접이식 스크린 제어.
• 화면 각도 조절: 화면 조정 view잉 각도.
• Return to the main interface: 메인 메뉴로 이동합니다.
• 이전 인터페이스로 돌아가십시오. Go back one step.

라디오(FM)

To enter radio mode, click the 'FM/Radio' icon on the menu.

1. 밴드 선택: Press 'FM' to cycle through FM radio bands (FM1/2/3).
2. Browse/Auto Memory: Press 'AS/PS' to browse saved stations (10 seconds per station). Press again on a desired station to stop browsing. Hold 'AS/PS' for 3 seconds to automatically store stations, prioritizing strong signals.
3. 수동 검색: Use the arrow buttons to manually tune frequencies.
4. 자동 검색: Use the auto search button to automatically scan and store stations.

Image: FM & EQ interface, displaying radio frequency tuning (87.5MHz-108MHz) and sound equalization options.

USB/TF 재생

해당 포트에 USB 플래시 드라이브 또는 TF 카드를 삽입하여 비디오와 음악을 재생하세요. USB 인터페이스는 휴대폰 충전도 지원합니다.

오디오/비디오 입력

Click the application icon to access the audio and video playback interface. Supported formats include AVI, MKV, QT, MPG, ASF, FLV, RMVB, MP3, WMA, ACC, WAVE, FLAC, APE, OGG, MP4 for audio/video, and BMP, GIF, JPG, PNG for images.

스티어링 휠 학습

To control the player with your car's steering wheel function keys:

1. Press any button on the steering wheel. The interface will prompt for a long press on the steering wheel button.
2. 화면을 클릭하여 도킹 기능을 알아보세요.
3. Click the corresponding function button on the steering wheel and repeat steps 1 and 2 until all desired controls are learned.

이 기능을 사용하려면 버스 제어 방식이 아닌 경우 순정 스티어링 휠이 필요하며, 스티어링 휠 키는 볼륨 조절 기능을 사용해야 합니다.tag입력 제어 방식.

Image: Steering Wheel Controls feature, showing the car radio interface for learning steering wheel function keys and a steering wheel with control buttons.

블루투스(BT)

The unit supports Bluetooth for music playback and hands-free phone calls.

1. Enter BT Settings: 설정 아이콘을 클릭한 다음 블루투스 아이콘을 클릭하세요.
2. 검색 및 페어링: 검색 the device's BT name (e.g., "CAR***") on your phone. A PIN code box may appear; enter "0000", "1234", or "88888888" if prompted. Confirm to connect.
3. 호출 기능:
   • Input phone numbers on the interface. Use the delete icon to correct.
   • 전화를 걸려면 다이얼 아이콘을 누르세요.
   • Press the end call icon to hang up.
4. 전화번호부:
   • Enter the phone book interface and click 'Sync Contact' to synchronize contacts.
   • 검색 버튼을 사용하여 영문자를 입력하면 연락처를 찾을 수 있습니다.
5. BT 음악 재생: Connect your phone via BT. Use the playback/pause/skip functions on the car stereo. Ensure music is playing on your phone's music app first.

Image: Bluetooth Music and Hands-Free Phone Call interface, showing the car radio display for Bluetooth music playback and a smartphone displaying a call screen and dial pad.

AUX 입력

AUX 라인은 차량용 오디오 플레이어(일부 모델에서 지원)로 오디오를 전송합니다.

Mirrorlink (Wired & Wireless, Optional)

Click the 'Mirrorlink Icon' to enter the Phone link menu. This feature allows you to mirror your phone's screen to the car stereo.

• For full-screen display, your phone's display mode must be set to 'landscape'.
• Bluetooth must be connected to synchronize audio from your phone to the car stereo.
• If your phone screen turns off, the car stereo display will also turn off.

Android Mirrorlink (Wired):

Connect your Android device via USB data cable. You may be prompted to install an APP. After installation, reconnect the cable to enter screen mirroring mode. You can operate from both the player and phone screens. Audio requires Bluetooth connection.

Image: Android Mirrorlink connection diagram, showing a smartphone connected via USB cable to the car radio, with the phone screen mirrored and touch input enabled on the radio.

iPhone Mirrorlink (Wired):

Connect your Apple phone via USB data cable and confirm authorization. Note that touch control on the car stereo for iPhone Mirrorlink is generally not supported.

Image: iPhone Mirrorlink connection diagram, showing a smartphone connected via USB cable to the car radio, with the phone screen mirrored but touch input not enabled on the radio.

무선 미러링크: Use your mobile phone to wirelessly search for and connect to the product device.

Apple CarPlay (Wired & Wireless, Optional)

This unit currently supports wired CarPlay. For wireless functionality, please refer to specific model support.

• 유선 연결: Connect your iPhone via USB data cable. The unit will automatically enter the CarPlay interface.
• Wireless Connection (if supported): Turn on Bluetooth and Wi-Fi on your mobile phone, then connect via Bluetooth. The unit will automatically enter the CarPlay interface. Note: The signal is transmitted via Wi-Fi; if Wi-Fi is turned off, CarPlay will disconnect.

Image: Android Auto & Carplay Connect feature, illustrating wired connection with a smartphone displaying car-optimized apps.

Android Auto (Wired & Wireless, Optional)

This unit currently supports wired Android Auto. For wireless functionality, please refer to specific model support. This feature may not be supported in all countries and requires Google Play services to be available locally.

• 소프트웨어: Google Play에서 "Android Auto" 소프트웨어를 다운로드하여 설치하세요.
• 휴대폰 요구 사항: Android 6.0 이상이 설치된 휴대폰이 필요합니다.
• 데이터 케이블: Must use a valid data cable connection.
• 유선 연결: Connect your Android phone via USB data cable. The unit will automatically enter the Android Auto interface.
• Wireless Connection (if supported): Turn on Bluetooth and Wi-Fi on your mobile phone, then connect via Bluetooth. The unit will automatically enter the Android Auto interface. Note: The signal is transmitted via Wi-Fi; if Wi-Fi is turned off, Android Auto will disconnect.

Reversing Camera Display (Optional)

The reversing video input connects via an RCA adapter cable. When a signal is detected, the LCD automatically switches to the camera image (camera purchased separately).

• 후면을 참고하세요view Camera Installation section for setup.
• If no rearview camera is installed, the display will show "No Signal".
• Triggering the rearview camera: Press the "Rearview 메인 인터페이스의 "캠" 아이콘을 클릭하거나 차량의 후진 기어를 넣으십시오.

안전 경고: 정상 주행 시 후진하지 마십시오.view 주의 산만을 방지하기 위해 카메라를 설치했습니다.

Image: Reversing Image display, showing a car's rear view with parking guidelines on the radio screen, with an optional camera.

유지

• 마른 천으로만 기기를 청소하십시오.
• Ensure the protective film from the back of the unit is removed for optimal heat dissipation.

문제 해결

간단한 문제 해결 가이드

Detailed Troubleshooting

1. Car radio does not turn on, or turns off after prolonged use.

• Ensure the red cable is connected to the ignition-positive terminal, the yellow cable to the battery-positive terminal (B+ 12V), and the black cable to the battery-negative terminal (GND 12V). Use only in a 12V-output vehicle.
• If the radio remains off after confirming correct wiring, temporarily connect the red and yellow cables together and attach them to the 12V-positive terminal.
• 퓨즈가 끊어졌는지 확인하세요.

2. Car radio powers on but produces no sound, or sound cuts out during playback.

• 스피커의 음극선이 제대로 접지되지 않았습니다.
• 그만큼 amplifier IC may be burned out due to a short circuit in the wiring.
• Check if any speaker cables have a short circuit and ensure each is individually insulated.
• If wiring is correct, test with another speaker to confirm if the problem is with the radio or car's system.

3. Car radio's Bluetooth is not working, or it works for a while then disconnects.

• 잊어버리고 다시 페어링: Go to your phone's BT settings, forget "CAR-MP5", then re-pair. Enter default PINs like 0000, 1234, or 88888888.
• If the above doesn't work, try finding the "reset hole" on the front panel and perform a reset. Alternatively, unhook the power connector for a few minutes and replug it.

4. Car radio's microphone is not working, phone call from the other side can't hear clearly.

• Check the BT volume setting.
• Ensure the microphone is not too far from you (e.g., dashboard too low).

5. 자동차 라디오는 USB 플래시 디스크나 SD/TF 카드를 읽을 수 없습니다.

• Confirm the capacity; it typically reads up to 32GB.
• 노래 수가 더 적은 다른 USB 메모리를 사용해 보세요.
• Ensure the SD/TF card is inserted correctly.

6. Car radio's remote control does not work.

• Check if the remote has the correct battery inside.

7. 후방 카메라는 라디오에서 작동할 수 없습니다.

• 분홍색 케이블이 후방 카메라 제어 케이블에 올바르게 연결되었는지 확인하십시오.

8. Car radio cannot save the time or radio station setting.

• Check if the Yellow cable is wired with your car's battery 12V+ (constant positive) to provide constant power.

9. 자동차 라디오 소음 문제.

• 소음, 특히 amplifier, can be due to interference. Ensure all cables are well-wrapped.
• 다른 스피커로 테스트하여 라디오 문제인지 차량 시스템 문제인지 확인하십시오.

10. Screen Mirroring Failure.

• 장치 호환성: Ensure your phone supports Mirroring.
• 연결: 차량의 Wi-Fi/블루투스를 켜고, 휴대폰 화면 미러링을 활성화한 후 "CAR-MP5"를 선택하세요.
• 신호 없음: Restart both devices. Note that some phones do not support mirroring.

명세서

Image: Product Parameter diagram, showing the dimensions of the 7-inch car radio: 180mm (7.09 inch) width and 105mm (4.13 inch) height.

사용자 팁

• 차량 호환성: While universal, always verify compatibility with your specific vehicle model and year (e.g., Ford Ranger 2014, GMC Terrain 2012) to ensure proper fit and wiring.
• 배선 정확도: Double-check all wiring connections, especially power and speaker lines, to prevent damage to the unit and ensure correct functionality. Incorrect wiring is a common cause of issues.
• 보호 필름: Remember to remove any protective films from the unit, particularly from the back, to allow for proper heat dissipation and prevent overheating.
• Mirrorlink Setup: When using Mirrorlink, ensure your smartphone is in landscape mode for full-screen display on the car radio. For audio, always confirm that Bluetooth is connected between your phone and the unit.
• 리모컨 배터리: The remote control does not include a battery due to customs reasons. You will need a CR2025 3V battery.

보증 및 지원

Thank you for choosing our product. If you have any further questions or require assistance, please contact customer service staff.

Product UI and functions may be modified and upgraded over time without prior notice. Any discrepancies in the manual due to these updates are normal.

For additional guidance, a comprehensive user manual in PDF format is available. You can access it via this link: 사용 설명서 (PDF).