1. 서론
The Aqara Light Sensor T1 is an advanced smart home device designed to detect ambient light changes and illuminance levels. Utilizing the Zigbee 3.0 wireless communication protocol, it seamlessly integrates into your smart home ecosystem, enabling intelligent automation and control of other connected devices. Its compact and versatile design allows for multiple installation methods, making it suitable for various applications within your home.
중요 공지:
- When connecting, please ensure the region of your Aqara Home APP is set to "China".
- This product requires a Zigbee 3.0 gateway to function.
- The Aqara Light Sensor T1 is compatible with Aqara Home APP and Apple Homekit. It does not work with Mi Home APP.
2. 안전 정보
- 이 제품은 실내에서만 사용하세요.
- 장치를 습기나 극한의 온도에 노출시키지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 장치를 직접 분해하거나 수리하려고 하지 마십시오.
- Ensure the installation surface is clean and dry for proper adhesion.
3. 패키지 내용
- Aqara Light Sensor T1
- 사용자 설명서
- Adhesive sticker (pre-attached or separate)
4. 사양
| 특징 | 세부 사항 |
|---|---|
| 제품 이름 | Aqara Light Sensor |
| 제품 모델 | GZCGQ11LM |
| 배터리 모델 | CR2450 |
| 배터리 수명 | Approximately 2 years (under normal usage) |
| 작동 온도 | -10°C ~ +50°C |
| 작동 습도 | 0-95% RH, 응축 없음 |
| 감지 범위 | 0-83,000 럭스 |
| 탐지 정확도 | ±2% (2854K 백열전구에서 교정됨)amp), 5% (other visible light sources) |
| 무선 연결 | 지그비 3.0 |
| 임원 표준 | Q / QLML025 |
| 전원 | DC(배터리) |
| 제어 채널 | 2채널 |
| 의회의 상태 | 즉시 사용 가능 |
| 인증 | CE |
5. 설정
5.1 물리적 설치
The Aqara Light Sensor T1 offers multiple installation methods due to its compact design and magnetic properties:
- Direct Placement: 센서를 평평한 표면의 원하는 위치에 직접 놓으세요.
- 자기 흡착: Adsorb the sensor to any metal surface.
- 접착 장착: Tear off the adhesive protective film (the attachment is equipped with a round adhesive tape) and paste it in the required detection area. Ensure the surface is clean and dry for optimal adhesion.
5.2 Connecting to Aqara Home APP
Follow these simple three steps to connect your Light Sensor T1 to the Aqara Home APP:
- Open the Aqara Home APP. Click on the "+" icon in the upper right corner of the home screen. Select "Light Sensor T1" from the device list.
- Press the reset button on the sensor for a long time until the blue light flickers 3 times, then release it.
- The Gateway will provide a voice prompt indicating that the device has been successfully added.
Remember, this product needs to be used with devices that have Zigbee 3.0 Gateway functionality, such as an Aqara Gateway M1S.
6. 사용 설명서
The Aqara Light Sensor T1 intelligently perceives light changes and illuminance, allowing for various smart home automations:
6.1 Automatic Curtain Control (Intimate Butler)
When strong sunlight is detected, the light sensor can be linked with an intelligent curtain motor to automatically close curtains, preventing damage to furniture and cosmetics from excessive sun exposure. When sunlight weakens, the curtains can automatically open.
6.2 Energy-Saving Assistant
If the indoor light is sufficient, the light sensor can automatically turn off connected lighting, contributing to energy saving and environmental protection.
6.3 Eye Protection Expert
When reading in the living room or when a child is studying, the light sensor can sensitively detect if the light is fading and automatically adjust or turn on lights to maintain optimal brightness, protecting eyesight.
6.4 Zigbee 3.0 Protocol Benefits
The sensor supports the powerful Zigbee 3.0 protocol, offering:
- Higher Security: Enhanced data encryption and protection.
- Openness: Greater compatibility with various smart home devices.
- 완벽한 솔루션: Comprehensive integration capabilities.
- More Stable Network: Reliable and consistent connectivity.
- 낮은 전력 소모: 배터리 수명 연장.
6.5 제품 시연 영상
7. 유지관리
7.1 청소
센서를 청소할 때는 부드럽고 마른 천으로 살살 닦아주세요. 액체 세척제나 연마성 재질은 센서를 손상시킬 수 있으므로 사용하지 마십시오.
7.2 배터리 교체
The Aqara Light Sensor T1 uses a CR2450 battery. When the battery level is low, you may receive a notification in the Aqara Home APP. To replace the battery:
- 센서 c를 조심스럽게 여세요asing.
- 기존 CR2450 배터리를 제거하세요.
- 극성이 올바른지 확인하면서 새 CR2450 배터리를 삽입하세요.
- 센서 c를 닫으세요asing 안전하게.
8. 문제 해결
- 장치가 연결되지 않음: Ensure your Aqara Home APP region is set to "China". Verify that you have a Zigbee 3.0 gateway and that it is powered on and connected to your network. Try resetting the sensor and re-pairing it.
- 부정확한 판독값: Ensure the sensor lens is clean and unobstructed. Avoid placing the sensor in direct sunlight or near strong artificial light sources that might interfere with readings.
- 짧은 배터리 수명: While the typical battery life is 2 years, frequent reporting or extreme environmental conditions might reduce it. Ensure you are using a fresh, high-quality CR2450 battery.
- Not responding to automation: Check the automation rules in your Aqara Home APP or Apple Homekit. Ensure the gateway is online and the sensor is within its communication range.
9. 사용자 팁
- 최적의 배치: For best results in light detection, place the sensor in an area that accurately represents the ambient light conditions you wish to monitor, away from direct light sources that might skew readings.
- Automation Integration: Experiment with different automation scenarios in the Aqara Home APP or Apple Homekit. For example, link the light sensor to smart bulbs to automatically adjust brightness based on natural light, or to smart plugs controlling lamps.
- 배터리 모니터링: Regularly check the battery status through the Aqara Home APP to ensure continuous operation and avoid unexpected disconnections.
10. 보증 및 지원
Aqara products are designed for reliability and performance. For warranty information, please refer to the specific terms and conditions provided at the time of purchase or contact your local Aqara distributor. For technical support or further assistance, please visit the official Aqara web사이트를 방문하거나 고객 서비스에 문의하세요.
