1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your new Car TPMS (Tire Pressure Monitoring System). This intelligent system is designed to enhance driving safety by continuously monitoring your vehicle's tire pressure and temperature, providing real-time data and warnings for potential issues. The system features a clear LCD display, dual charging capabilities (solar and USB), and external sensors for easy installation.
2. 주요 특징
- 보편적 인 호환성 : Widely applicable to various car models, including commercial cars, jeeps, off-road vehicles, minibuses, and travel cars, with tire pressures in the range of 0-6.0 Bar.
- 듀얼 충전 모드: Equipped with a high-efficiency solar power panel and a USB charging port for continuous power supply.
- 실시간 모니터링: Simultaneously displays tire pressure and temperature for all four wheels.
- Intelligent Auto On/Off: The screen automatically turns off when there is no operation, conserving battery.
- 안전 알람: Provides alerts for low voltage, tire leakage, and abnormal tire temperature.
- 정확한 데이터: Delivers precise tire data for informed driving decisions.
- 긴 배터리 수명: Designed for extended operational periods.
3. 패키지 내용
다음 품목이 패키지에 포함되어 있는지 확인하세요.
- 1 x TPMS Display Unit
- 4 x External Sensors (labeled F.R, R.R, R.L, F.L)
- 1 x USB 충전 케이블
- 1 x 렌치
- 4 x Hexagonal Anti-theft Nuts
- 1 x Adhesive Pad (for mounting the display unit)
4. 설치 가이드
4.1 디스플레이 장치 설치
Place the TPMS display unit on your car's dashboard using the provided adhesive pad. Ensure it is in a position where it receives sufficient sunlight for solar charging and does not obstruct your view while driving. The USB charging interface is located on the side of the unit.
4.2 외부 센서 설치
Follow these steps to install the external sensors on your vehicle's tires. Ensure each sensor is installed on its corresponding tire (Front Left, Front Right, Rear Left, Rear Right) as indicated by the labels (FL, FR, RL, RR).
- 밸브 캡 제거: 타이어 밸브에서 기존 밸브 캡을 풀어냅니다.
- Install Hexagonal Nut: Screw the hexagonal anti-theft nut onto the tire valve stem. Do not tighten it yet.
- 센서 설치: Screw the corresponding sensor (e.g., 'FL' for Front Left) onto the tire valve stem until it is hand-tight.
- 보안 센서: Using the provided wrench, tighten the hexagonal anti-theft nut counter-clockwise against the sensor to secure it in place. This prevents theft and ensures a tight seal.
- 누출 확인: Apply soapy water around the valve stem and sensor to check for any air leaks. If bubbles appear, re-tighten the sensor and nut.
5. 사용 설명서
5.1 전원 켜기/끄기
The display unit will automatically power on when it detects vibration (e.g., when the car starts moving) and power off after a period of inactivity. You can also manually power it on or off using the Power button on the unit.
5.2 디스플레이 정보
The LCD display shows real-time pressure (in Bar) and temperature (in °C) for all four tires simultaneously. A car icon in the center indicates the tire positions. Battery level of the display unit is also shown.
5.3 디스플레이 장치 충전
The display unit can be charged in two ways:
- 태양열 충전: Place the unit on the dashboard where it can receive direct sunlight. The built-in solar panel will charge the internal battery.
- USB 충전: Connect the provided USB cable to the USB charging interface on the side of the unit and to a 5V USB power source (e.g., car charger, computer USB port).
5.4 메뉴 및 설정
Use the 'Menu' and 'Select' buttons on the display unit to navigate through settings and adjust parameters such as pressure units (Bar/PSI), temperature units (°C/°F), and alarm thresholds. Refer to the on-screen prompts for specific adjustments.
6. 유지관리
- 청소: 디스플레이 장치와 센서는 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 배터리 관리 : Ensure the display unit is regularly charged via solar power or USB to maintain optimal performance.
- 센서 점검: Periodically check the sensors for tightness and signs of damage. Re-tighten anti-theft nuts if necessary.
- 저장: If storing the system for an extended period, ensure the display unit is fully charged and stored in a cool, dry place.
7. 문제 해결
- 화면이 표시되지 않거나 기기가 켜지지 않습니다. Ensure the unit is charged. Connect it to a USB power source. If solar charging, ensure it's in direct sunlight.
- 센서 판독값 없음: Verify that all sensors are correctly installed and tightened. Drive the vehicle for a short period to activate the sensors. Check if the sensor batteries are depleted (though external sensors typically have long-lasting batteries).
- 부정확한 판독: Ensure sensors are installed on the correct tires. Recalibrate the system if an option is available in the menu (refer to specific menu settings).
- 알람이 계속 울립니다: Check all tire pressures and temperatures. If a tire is genuinely low or hot, address the issue immediately. If readings are normal, check alarm threshold settings in the menu.
- Display Unit Not Charging: Ensure the solar panel is clean and exposed to sunlight. Check the USB cable and power source if using USB charging.
8. 사양
| 매개변수 | 값 |
|---|---|
| 재료 | PC + Metal |
| 작동 습도 | 0-98% |
| 작동 온도 범위 | -20°C ~ +60°C |
| 압력 측정 범위 | 0-4 Bar (gauge pressure) |
| 전송 주파수 | 433.92MHz |
| 전송 전력 | 5dBm 이하 |
| Pressure Display Accuracy | ±0.1 바 |
| 온도 측정 정확도 | ±2°C |
9. 사용자 팁
- For optimal solar charging, ensure the display unit is placed on the dashboard in a location with maximum sun exposure.
- Regularly check tire pressure manually with a gauge to cross-reference with the TPMS readings, especially after installation.
- Keep the sensor caps clean to prevent dirt buildup that could affect readings or sealing.
- If you notice a significant drop in pressure or a persistent alarm, pull over safely and inspect your tires.
10. 보증 및 지원
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact your retailer or the point of purchase. Keep your purchase receipt as proof of purchase.
