KAIWEETS EXPLORER X I Metal Detector

1. 서론

The KAIWEETS EXPLORER X I is an advanced metal detector designed for both beginners and experienced treasure hunters. Featuring an upgraded DSP chip, it offers high accuracy and sensitivity for detecting various metals. Its intuitive LCD display, adjustable stem, and IP68 waterproof search coil make it versatile for different environments and users. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

2. 패키지 내용

모든 품목이 들어 있는지 확인하기 위해 패키지를 주의 깊게 확인하세요.

• 1 x KAIWEETS EXPLORER X I Metal Detector
• 2 x 9V 배터리
• 1의 X 헤드셋
• 1 x Collapsible Shovel
• 1 x 보관 가방
• 1 x 사용자 매뉴얼(이 문서)

3. 조립 설명서

금속 탐지기를 조립하려면 다음 단계를 따르십시오.

1. Attach the Control Box: Slide the control box onto the main stem until it clicks securely into place. Ensure the connector cable from the search coil can reach the control box port.
2. Connect the Search Coil: Insert the search coil's cable into the designated port on the control box. Tighten the collar to secure the connection.
3. Adjust the Stem: Loosen the locking collar on the stem. Adjust the stem length to a comfortable position (between 29 and 44 inches) for your height. Tighten the locking collar to secure the stem.
4. 배터리 설치: 제어 상자의 배터리함을 열고 9V 배터리 두 개를 극성을 확인하여 삽입하십시오. 배터리함을 단단히 닫으십시오.
5. 팔걸이 부착: Ensure the armrest is properly attached and adjusted for comfort.

4. 구성 요소 및 제어

Familiarize yourself with the main components and controls of your EXPLORER X I metal detector:

• Intelligent LCD Panel: Displays detection modes, target ID, depth, sensitivity, volume, and battery status. Features an adjustable backlight for dark conditions.
• 전원 켜기 / 끄기 버튼 : 감지기를 켜거나 끕니다.
• SENS 버튼: Adjusts the sensitivity level of the detector.
• PP(정밀점) 버튼: Activates Pinpoint mode for precise target location.
• MODE 버튼: Cycles through the 6 detection modes.
• '+' 및 '-' 버튼: Used to adjust settings such as volume, sensitivity, or to select/deselect target types in certain modes.
• Vol/Backlight Switch: Controls the volume and activates/deactivates the LCD backlight.
• 헤드폰 지원: Allows connection of headphones for clearer audio signals.
• 인체공학적 손잡이: Provides a comfortable grip during use.
• 3-Gear Adjustable Stem: Allows for length adjustment to suit different users.
• 11.8" IP68 Waterproof Search Coil: The detection coil, fully submersible for underwater use (note: control box is NOT waterproof).

5. Initial Setup and Power On

1. After assembly and battery installation, press the 전원 켜기/끄기 button to turn on the detector.
2. The LCD screen will illuminate, displaying default settings.
3. 볼륨 조절: 사용하세요 Vol/Backlight Switch to set a comfortable audio level.
4. 백라이트 조정: If operating in low-light conditions, use the Vol/Backlight Switch to turn on the LCD backlight.
5. 그라운드 밸런스: The detector is equipped with a ground balancing device to minimize interference from ground mineralization. While specific manual ground balance steps are not detailed, the device automatically works to eliminate this impact.

6. 작동 모드

The KAIWEETS EXPLORER X I features 6 professional detection modes. Press the 방법 버튼을 눌러 순환합니다.

• 6.1. All Metal Mode (A-M)

  In this mode, the detector will respond to all types of metal targets. It is ideal for general searching when you want to find any metallic object.

  

• 6.2. Disc Mode

  Discrimination mode allows you to eliminate certain types of unwanted metals. The detector will not respond to the eliminated targets. Use the '+' and '-' buttons to adjust the discrimination level.

• 6.3. Notch Mode

  Notch mode enables you to customize the removal of specific unwanted metal targets. Press 방법 to select NOTCH, then use the '+' or '-' buttons to select the target to be notched. The cursor around the selected target will flash, and the target name inside the cursor will disappear, indicating it's excluded from detection.

  

• 6.4. 메모리 모드

  In Memory mode, the detector will only respond to a specific type of metal that you have previously memorized. This is useful for searching for a particular type of treasure.

  

• 6.5. Coins Mode

  This specialized mode is optimized for detecting coins. When activated, the detector will primarily identify and signal the presence of coins.

  

• 6.6. Pinpoint Mode (P-P)

  를 누르세요 PP button to convert the detector to Pinpoint mode. This mode helps you accurately locate the exact position of a detected target before digging.

  

7. 일반 운영

Once you have selected your desired detection mode, hold the detector with the search coil parallel to the ground and sweep it slowly from side to side. Listen for audio signals and observe the LCD display for target identification and depth information.

• 감도 조정 : 조정하다 감각 level based on ground conditions. Lower sensitivity for highly mineralized ground to reduce false signals; higher sensitivity for clear ground to detect deeper targets.
• 타겟 식별: The LCD will display icons representing different metal types (Fe, Ni, Al, Zn, Ag, Gold, Silver) and a Target ID number to help identify the detected object.
• Depth Indication: The display also shows an estimated depth of the detected target.
• 수중 탐지: The 11.8" IP68 waterproof search coil allows for detection in shallow water. However, remember that the control box is NOT waterproof and must be kept dry.

8. 유지관리

• 청소: 사용 후에는 감지기를 광고로 닦아주세요.amp cloth. Ensure the search coil is free of dirt and debris. Do not use abrasive cleaners or solvents.
• 제어기: Keep the control box dry at all times. If it gets wet, dry it immediately.
• 저장: 금속 탐지기를 사용하지 않을 때는 서늘하고 건조한 곳에 보관하십시오. 장기간 보관할 경우 누액 방지를 위해 배터리를 제거하십시오.
• 배터리 교체: Replace batteries when the battery indicator on the LCD shows low power. Always use fresh 9V batteries.

9. 문제 해결

전원 없음:

Check if batteries are correctly installed and fully charged. Replace if necessary.

False Signals/Chattering:

Reduce sensitivity (SENS). Ensure you are not near other electronic devices or power lines. Perform ground balancing. Avoid sweeping the coil too fast.

Detector Not Responding to Metal:

Ensure the detector is in 'All Metal Mode' or a mode that includes the target metal. Check sensitivity settings. Ensure the search coil cable is securely connected.

대상 ID가 부정확합니다:

This can occur with highly corroded objects, multiple targets close together, or deeply buried items. Try sweeping from different angles.

10. 사양

11. 사용자 팁

• Ground Balancing: The EXPLORER X I features an automatic ground balancing device. For best results, especially in highly mineralized areas, ensure you sweep the coil smoothly and consistently to allow the detector to adapt to ground conditions.
• 선명한 음질을 위한 헤드폰: Using the included headphones can significantly improve your ability to hear faint signals, especially in noisy environments.
• 관행: Familiarize yourself with the different modes and their audio responses by testing the detector with known metal objects in a clear area before going out to search.

12. 보증 및 지원

KAIWEETS products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to the contact information provided by your retailer or visit the official KAIWEETS web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.