1. 서론
The QIACHIP Wifi Smart Ceiling Fan Switch (Model FLCW-110V/FLCW-220V) is a versatile controller designed to transform your conventional ceiling fan and light into a smart device. It offers dual control methods: a traditional RF remote control and a modern mobile application. This smart switch supports 3 fan speeds, timer functions, and is compatible with popular voice assistants like Amazon Alexa and Google Home. The RF remote control provides a reliable fail-safe option in case of internet connectivity issues.
QIACHIP Wifi Smart Ceiling Fan Switch components and smart home compatibility.
2. 안전 정보
- 설치 또는 유지보수 전에 회로 차단기에서 전원이 차단되었는지 확인하십시오.
- 설치는 자격을 갖춘 전기 기술자가 수행하거나 해당 지역의 전기 규정에 따라 수행해야 합니다.
- Do not exceed the maximum load power ratings for the fan and light.
- 이 장치는 실내에서만 사용하도록 설계되었습니다.
- 기기를 물과 습도가 높은 환경에서 멀리 두십시오.
3. 패키지 내용
- 1 x RF 원격 제어
- 1 x Receiver (Fan Lamp 제어 장치)
- 1 x Remote Control Stand
- 1 x 사용 설명서
4. 제품 사양
| 기인하다 | 값 |
|---|---|
| 모델 번호 | FLCW-110V/FLCW-220V |
| 브랜드 이름 | 키아칩 |
| 의회의 상태 | 즉시 사용 가능 |
| 호환성 | 모두 호환 가능 |
| 통신 방법 | RF, Wi-fi |
| 카메라 장착 | 아니요 |
| 기원 | 중국 본토 |
| 인증 | CE, FCC, RoHS |
| 입력 Voltage | AC 110V or AC 220V (depending on model) |
| 최대 부하 전력 | <300W 천장 선풍기 / <200W LED 조명 |
| 대기 전력 소모 | <0.5여 |
| 작동 온도 | -20℃~80℃ |
| 제어 방법 | RF 433Mhz Remote & Mobile App Control |
| 배선 방법 | Load & Neutral Wire |
| 앱 이름 | 스마트 라이프 |
| 품목 무게 | 210g / 7.8 온스 |
| 패키지 크기 | 5.5 x 4.9 x 1.4 인치 |
Dimensions of the remote control and receiver.
5. 설치
The QIACHIP Smart Ceiling Fan Switch is designed to replace the original driver of your non-smart LED ceiling fan. It requires a Load & Neutral Wire connection.
5.1 배선도
Carefully follow the wiring diagram below. Ensure all connections are secure and insulated.
Wiring connections for the QIACHIP Fan Lamp 제어 장치.
5.2 설치 단계
- Disconnect power to the ceiling fan at the circuit breaker.
- Remove the existing fan canopy and disconnect the old driver/wiring.
- Connect the QIACHIP receiver according to the wiring diagram provided.
- Carefully tuck the receiver and wiring into the fan canopy.
- Secure the fan canopy back in place.
- 회로 차단기에서 전원을 복구하세요.
Visual guide for installing the fan lamp 제어 장치.
5.3 설치 비디오 가이드
For a visual demonstration of the wiring and app pairing process, please refer to the video below:
Video demonstrating the wiring process and mobile app pairing for the QIACHIP Smart Ceiling Fan Switch.
6. 운영
6.1 RF Remote Control Functions
The included 2.4G RF remote control allows for direct control of your fan and light. The remote has an effective range of up to 50 feet.
Remote control button functions.
- LOW, MED, HI: 팬 속도를 조정합니다.
- 조명 켜기/끄기: 조명을 켜거나 끕니다.
- 멈추다: 선풍기를 끕니다.
- 1H, 2H, 4H, 8H: Sets a timer for the fan to turn off after the specified duration.
- 표시등: Provides visual feedback for remote operations.
Remote control in use, demonstrating its range.
6.2 Mobile App Control (Smart Life App)
The 'Smart Life' mobile app (available for iOS and Android) allows for advanced control and automation features.
- 원격 온/오프: Control the fan and light from anywhere.
- 팬 속도 제어: Adjust fan speed levels (1/2/3).
- Smart Reservation & Countdown: Set schedules and timers for the light to turn on/off at specified times. Note: The fan does not have a schedule timer feature.
- 공유 제어: 스마트 홈 기기의 제어 권한을 가족 구성원과 공유하세요.
- 스마트 장면 : Create automated scenes based on environmental conditions or other smart devices.
- 조명 강도 조정: Dimmable light support for white, warm white, and warm color.
Light schedule timer function via the Smart Life app.
6.3 음성 제어
The QIACHIP Smart Ceiling Fan Switch supports voice control through Amazon Alexa and Google Home. Once paired with the Smart Life app and linked to your voice assistant, you can use voice commands to control your fan and light.
7. 페어링 지침
7.1 RF 리모컨 페어링
Our products are pre-paired at the factory and can be controlled directly with the remote control after installation.
- After the receiver has been connected to power, you will hear a beep.
- Within 15 seconds of powering on the receiver, press the 'LIGHT' and 'HI' buttons on the remote control simultaneously.
- Hold until you hear 3 beep sounds from the receiver (the LED on the remote control will flash simultaneously).
- The pairing process is now complete.
7.2 Mobile App Pairing (Smart Life App)
To control your device via the Smart Life app, follow these steps:
- Initiate Pairing Status: After power-on, initiate the pairing state by holding down the 'LIGHT' and 'HI' buttons on the RF remote control simultaneously for at least 10 seconds until you hear a long beep sound from the receiver or the LED light switches off.
- 앱을 다운로드하고 실행하세요: Download and open the 'Smart Life' mobile app on your smartphone.
- 장치 추가: Press the '+' button in the top right corner of the mobile app.
- 장치 유형 선택: Under 'Add Manually', select 'Small Home Appliances', then choose 'Fan'.
- 확인 표시기: Click 'Confirm indicator rapidly blink' in the app.
- Wi-Fi 세부 정보 입력: Enter your Wi-Fi network name and password, then proceed to click 'OK' or 'Confirm'.
- 연결: The app will begin connecting to the device. Please wait for the connection to succeed.
- 완성: Once connected, proceed to click 'Done'. Your device should now appear in the app's home screen.
8. 문제 해결
8.1 RF Remote Control Clearing/Reset
If you need to unpair or reset the remote control:
- 수신기의 전원이 켜져 있는지 확인하세요.
- Within 15 seconds of powering on the receiver, press the 'LIGHT' button on the remote control 5 times.
- Hold until you hear a long beep from the receiver.
- The remote control is now reset and no longer paired with the receiver.
8.2 일반적인 문제
- 장치가 응답하지 않음: Check power connections. Ensure the remote has working batteries. If using the app, check Wi-Fi connectivity.
- App pairing failure: Ensure your Wi-Fi network is 2.4GHz (5GHz networks are not supported for initial pairing). Make sure the device is in pairing mode (LED rapidly blinking).
- No beep sound during pairing: Verify the receiver is correctly wired and powered.
- Fan/Light not working after installation: Double-check all wiring connections against the diagram. Ensure the maximum load power is not exceeded.
9. 사용자 팁
- For optimal performance and to avoid interference, ensure the receiver is installed securely within the fan canopy and away from other electrical components if possible.
- When pairing with the Smart Life app, ensure your mobile device is close to the fan controller for a stable connection.
- The fan controller is designed for AC motors. If you are unsure about your fan's motor type, consult your fan's manual or a qualified electrician.
- If you encounter any difficulties with the app connection, try resetting the device and attempting the pairing process again.
10. 보증 및 지원
Enjoy a 12-month warranty for hardware-related issues. For any questions or support, please visit qiachip.com or contact customer support for friendly 24/7 email assistance.
Product Certifications: CE, FCC, RoHS.
