YANZEO 무선 2.4G 바코드 스캐너 사용 설명서

1. 서론

This manual provides detailed instructions for the setup, operation, and maintenance of your YANZEO Wireless 2.4G Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance.

2. 제품 오버view

The YANZEO Wireless 2.4G Barcode Scanner is a portable, handheld device designed for efficient and accurate scanning of both 1D and 2D barcodes. Its durable ABS+PC construction makes it suitable for various environments such as retail stores, warehouses, and libraries. Featuring a plug-and-play setup, it offers seamless integration with Windows operating systems.

그림 1: 앞면과 측면 view of the YANZEO Wireless 2.4G Barcode Scanner.

그림 2: 뒷면 및 하단 view of the scanner, highlighting the trigger and ergonomic handle.

Figure 3: Common applications for the barcode scanner.

3. 설정 지침

The YANZEO Wireless 2.4G Barcode Scanner is designed for a simple plug-and-play setup. Follow these steps to get your scanner ready for use:

1. 스캐너 충전: Before initial use, ensure the scanner is fully charged. Connect the scanner to a USB power source using the provided charging cable. The indicator light will show charging status.
2. Connect the 2.4G USB Receiver: Locate the 2.4G USB receiver (dongle) that comes with your scanner. Plug this receiver into an available USB port on your computer.
3. 스캐너 전원 켜기: Press and hold the power button on the scanner until it turns on. The scanner will automatically attempt to pair with the USB receiver. A successful connection is usually indicated by a specific sound or light pattern on the scanner.
4. 연결 테스트: Open a text editor (like Notepad) or any application where you want to input scanned data. Scan a test barcode. If the data appears in the application, the setup is complete.

The scanner supports Windows XP, 7, 8, and 10 systems, requiring no additional driver installation.

4. 사용 설명서

Using your YANZEO Wireless 2.4G Barcode Scanner is straightforward:

1. 조준: Point the scanner's laser or light beam directly at the barcode you wish to scan. Ensure the entire barcode is within the scanning area.
2. 스캐닝: Press the trigger button located on the handle of the scanner. The scanner will emit a beam and attempt to read the barcode.
3. 확인: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as if typed via a keyboard.
4. 지원되는 바코드: The scanner is capable of reading a wide range of 1D and 2D barcodes, including:

4.1. 1D 바코드

• UPC-A, UPC-E, EAN-8, EAN-13
• 코드 39, 코드 93, 코드 32, 코드39 (ASCII)
• Industrial 2 of 5, Interleave 2 of 5, Matrix 2 of 5
• NW7, Code 128, UCC/EAN128, USD-8
• MSI/Plessey, UK/Plessey, GS1 DataBar, Postal Code

4.2. 2D 바코드

• 데이터매트릭스(ECC200)
• QR 코드
• PDF417

5. 유지관리

바코드 스캐너의 수명 연장과 최적의 성능을 보장하려면 다음의 간단한 유지 관리 지침을 따르십시오.

• 청소: 스캐너 외부를 부드럽고 마른 천이나 약간 젖은 천으로 정기적으로 닦아주세요.amp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the ABS+PC material.
• 렌즈 관리: Keep the scanning window clean and free of dust or smudges. Use a soft, lint-free cloth, possibly dampened with a lens cleaning solution, to gently clean the scanning lens.
• 저장: 사용하지 않을 때는 스캐너를 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 손질: While the scanner is made of durable ABS+PC material, avoid dropping it or subjecting it to severe impacts to prevent internal damage.

6. 문제 해결

If you encounter issues with your YANZEO Wireless 2.4G Barcode Scanner, please refer to the following common troubleshooting steps:

• 스캐너가 연결되지 않음:
  • USB 수신기가 컴퓨터에 제대로 연결되어 있는지 확인하십시오.
  • Verify the scanner is powered on and fully charged.
  • USB 수신기를 컴퓨터의 다른 USB 포트에 꽂아보세요.
  • 컴퓨터를 다시 시작하고 다시 연결해 보세요.
• 스캔 후 데이터 출력 없음:
  • Confirm the scanner is successfully connected to the receiver (check indicator lights/sounds).
  • Make sure the cursor is active in the input field of the application you are using.
  • 바코드가 깨끗하고 손상되지 않았으며 제대로 조명되는지 확인하십시오.
  • Check if the barcode symbology is supported by the scanner (refer to Section 4.1 and 4.2).
• 느리거나 일관성 없는 스캔:
  • Ensure there are no obstructions between the scanner and the USB receiver.
  • Check for potential interference from other 2.4G wireless devices.
  • 유지 관리 섹션에 설명된 대로 스캔 창을 청소하십시오.

7. 사양

8. 사용자 팁

re에서 특정 사용자 팁을 사용할 수 없습니다.views or Q&A for this product. For general best practices:

• Ensure good lighting conditions when scanning to improve readability of barcodes.
• Hold the scanner steady and at an appropriate distance from the barcode for optimal scanning performance.
• Keep the scanner's battery charged to avoid interruptions during use.

9. 보증 및 지원

For warranty information, technical support, or service inquiries regarding your YANZEO Wireless 2.4G Barcode Scanner, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty claims.