1. 서론
The ThinkCar THINKTPMS TP T90 Pro is an accurate and reliable TPMS (Tire Pressure Monitoring System) service tool designed for comprehensive tire health management. This plug-and-play device is compatible with a wide range of American, European, and Asian manufactured vehicles, offering robust capabilities for TPMS sensor activation, reading, relearning, and programming.
Unlike some other tools, the THINKTPMS TP T90 Pro operates independently, eliminating the need for a separate tablet or diagnostic device for programming and learning functions. It also supports full OBDII diagnostics, making it an ideal choice for professional technicians and advanced DIY users to ensure optimal tire performance and safety.
2. 안전 지침
CAUTION: Any maintenance and repair work must be carried out by trained experts. Failure to do so may result in the failure of the TPMS sensor. ThinkCar does not assume any liability in case of faulty or incorrect installation of the unit.
- 휠을 장착/분리할 때 휠 체인저 제조업체의 작동 지침을 엄격히 따르십시오.
- LTR-01 RF 센서가 장착된 차량과 레이스를 하지 말고, 항상 240km/h 이하의 주행 속도를 유지하십시오.
- 최적의 성능을 보장하기 위해 센서는 ThinkCar에서 제공하는 정품 밸브 및 액세서리와 함께만 설치해야 합니다.
- 설치 전에 ThinkCar 전용 TPMS 도구를 사용하여 센서를 프로그래밍해야 합니다.
- 손상된 바퀴에 프로그램된 TPMS 센서를 설치하지 마세요.
- TPMS 센서를 설치한 후 원래 제조업체의 사용자 설명서에 설명된 단계에 따라 차량의 TPMS를 테스트하여 제대로 설치되었는지 확인합니다.
3. 구성 요소 및 제어
The THINKTPMS TP T90 Pro features an intuitive interface and robust construction for ease of use in automotive environments. The device includes a 2.5-inch screen for clear display of information and an integrated OBD2 port for vehicle connection.
The ThinkCar S3 2-in-1 sensor (if included) consists of a sensor body, valve stem, cap, washer, and nut. The patented press-release valve design allows for easy interchangeability of rubber and metal valves by hand.
4. 설정
The THINKTPMS TP T90 Pro is designed for straightforward setup and immediate use.
- 전원 켜기: 장치의 전원 버튼을 눌러 장치를 켜십시오.
- 차량 연결: Connect the device to your vehicle's OBD2 port using the provided cable. The device will draw power directly from the vehicle.
- 초기 스캔: The device will typically perform an initial scan upon connection to identify the vehicle and its TPMS system.
- Software Update (Optional): Ensure your device has the latest software version (V2.04 or newer) for optimal compatibility and functionality. Refer to the 'Maintenance' section for update instructions.
5. 사용 설명서
The THINKTPMS TP T90 Pro offers several key functions for managing your vehicle's TPMS.
5.1. 센서 활성화
This function allows you to activate all known TPMS sensors. Follow the on-screen prompts to initiate sensor activation, typically by holding the device near each tire's sensor.
5.2. 센서 프로그래밍
The device supports programming sensor data to ThinkCar TPMS sensors (S1/S2) and replacing faulty sensors. Up to 8 sensors can be programmed simultaneously. This is crucial when installing new sensors or replacing existing ones.
5.3. Sensor Relearn
After programming new sensors or rotating tires, a relearn procedure is necessary. This function writes the newly programmed sensor IDs into the vehicle's Engine Control Unit (ECU) to ensure proper sensor recognition by the vehicle's system. The relearn process can be performed via the OBD port.
5.4. Diagnostic Function
The THINKTPMS TP T90 Pro provides comprehensive tire pressure fault diagnostics. This includes:
- 진단 문제 코드(DTC) 읽기 및 삭제.
- Viewing live data streams from TPMS sensors.
- Reading tire temperature.
- Reading sensor battery level condition.
This diagnostic capability helps identify issues such as tire aging, leaks, high temperature, or other factors contributing to tire pressure abnormalities.
6. 유지관리
To ensure the longevity and optimal performance of your THINKTPMS TP T90 Pro and S3 sensors, follow these maintenance guidelines:
- 소프트웨어 업데이트: Regularly check for and install software updates for your THINKTPMS TP T90 Pro. Updates often include expanded vehicle coverage, new features, and bug fixes.
- 청소: Keep the device clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Avoid harsh chemicals or abrasive materials.
- 저장: 사용하지 않을 때는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 센서 처리: Handle S3 sensors with care. While designed for durability, improper handling can cause damage.
- 배터리 수명: The S3 sensors are designed for superior battery life. Monitor sensor battery levels using the diagnostic tool and replace sensors as needed when battery life is low.
7. 문제 해결
If you encounter issues with your THINKTPMS TP T90 Pro, consider the following common troubleshooting steps:
- 장치 전원이 켜지지 않음: Ensure the device is correctly connected to the vehicle's OBD2 port. Check the vehicle's battery status.
- Sensor Not Activating/Programming:
- Ensure the device is held close enough to the sensor.
- Verify the sensor is a compatible 315MHz or 433MHz type.
- Check if the sensor battery is depleted (use the diagnostic function to read battery level).
- Confirm the device software is up to date.
- Relearn Failure:
- Ensure all sensors are correctly programmed and activated.
- Follow the vehicle manufacturer's specific relearn procedure precisely.
- Check for any vehicle-specific error codes using the diagnostic function.
- 부정확한 판독:
- Verify tire pressure with a calibrated manual gauge.
- Check for physical damage to the sensor or valve stem.
- Perform a sensor activation and relearn procedure.
- 기기가 정지되거나 응답하지 않음: Restart the device. If the issue persists, ensure the software is updated.
For persistent issues or complex problems, please contact ThinkCar customer support for assistance.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | THINKTPMS TP T90 |
| 품목 유형 | 압력 및 진공 시험기 |
| 화면 크기 | 2.5인치 |
| 연결 | Through OBD2 Port |
| 특별 기능 | 블루투스 |
| 지원되는 센서 주파수 | 315MHz / 433MHz |
| 프로그래밍 능력 | 최대 8개 센서 동시 사용 가능 |
| 차량 보장 | Over 98% of imported models with TPMS system, compatible with OBD II protocol |
| 기능 | Sensor Activation, Sensor Programming, Sensor Relearn, Read Temperature, Read Codes & Clear Vehicle Fault Codes, Read sensor data via Bluetooth, Read battery level condition |
| 재료 | 플라스틱 |
| 인증 | CE, SAE J2657 (for S3 sensors) |
| 품목 무게 | 1kg |
| 품목 치수(L x W x H) | 8 inch x 8 inch x 8 inch (approximate) |
| 패키지 치수(L x W x H) | 20cm x 19cm x 10cm |
| 패키지 무게 | 0.766kg |
9. 보증 및 지원
ThinkCar guarantees its S3-Sensors to be free from manufacturing defects for a period of 24 months or 31,000 miles, whichever comes first. For specific warranty details regarding the THINKTPMS TP T90 Pro device, please refer to the product packaging or contact ThinkCar customer service.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or ThinkCar customer service directly. Ensure you have your product model and serial number available for faster service.
10. 사용자 팁
- 차량 호환성: While the THINKTPMS TP T90 Pro supports over 98% of TPMS-equipped vehicles, it's always recommended to verify compatibility with your specific vehicle model (e.g., 2022 Toyota Highlander Hybrid, 2020 Toyota Corolla Hybrid) before performing any operations.
- Universal Sensor Support: The tool is designed to scan and program both 315MHz and 433MHz TPMS sensors, including those from various brands, offering broad utility.
- 독립적인 운영: The TP T90 Pro functions as a standalone device for programming and relearning, providing convenience without needing to be paired with another diagnostic tablet.
- 정기 업데이트: Keep the device's software updated to ensure access to the latest vehicle databases and TPMS technologies.
- 센서 설치: When installing S3 sensors, remember their unique press-release valve design allows for easy interchangeability of rubber and metal valves by hand, simplifying the installation process.
