1. 서론
This manual provides essential information for the installation, operation, and maintenance of your Kugoo ES2 Microgo M5 Electric Scooter Controller. This controller is designed to manage the motor functions of compatible electric scooters, ensuring optimal performance and a maximum speed of 30 km/h. Please read this manual thoroughly before attempting any installation or use.
2. 안전 정보
- Always disconnect the scooter's power source (battery) before installing or replacing the controller.
- Ensure all connections are secure and correctly matched to prevent electrical damage.
- 어떤 단계든 확신이 서지 않으면 전문가의 도움을 받으십시오.
- 컨트롤러를 건조하고 극한 온도에 두지 마세요.
3. 설치 및 설정
The controller is an internal component of the electric scooter. Installation typically involves replacing an existing controller. Refer to your scooter's specific service manual for exact location and removal procedures. The following images illustrate the controller and its various wire connectors.
Figure 3.1: Kugoo ES2/M5 Electric Scooter Controller with various wire connectors. Note the different colored wires and connector types for various scooter functions.
그림 3.2: 클로즈업 view of the controller, showing the product label with specifications and the arrangement of wire harnesses.
그림 3.3: 예ample of a compatible electric scooter (Kugoo ES2 or Microgo M5) for which this controller is designed.
연결을 통해view:
The controller features multiple wire harnesses, each designed for a specific connection:
- 모터 와이어: Typically thicker wires (often three phases) connecting directly to the scooter's motor.
- 배터리 전선: Thicker red and black wires for power input from the battery.
- 홀 센서 와이어: Smaller wires (usually five) for motor position sensing.
- Throttle/Accelerator Wires: Connect to the handlebar throttle for speed control.
- 브레이크 와이어: Connect to the brake levers for motor cut-off during braking.
- Display/Dashboard Wires: For communication with the scooter's display unit.
- 가벼운 전선: For connecting headlights or taillights (if applicable).
Ensure each connector is securely plugged into its corresponding port. Incorrect wiring can lead to malfunction or damage.
4. 사용 설명서
Once the controller is correctly installed and the scooter's battery is connected, the controller will manage the scooter's electrical functions. Operation is performed via the scooter's standard controls (throttle, brakes, display).
- 전원 켜기/끄기: Use the scooter's main power button to activate or deactivate the system.
- 속도 제어: The controller regulates motor speed based on throttle input. This controller supports a maximum speed of 30 km/h.
- 제동: When brakes are applied, the controller cuts power to the motor and may activate regenerative braking (if supported by the scooter model).
- 피드백 표시: The controller sends data to the scooter's display, showing speed, battery level, and other relevant information.
Figure 4.1: Scooter handlebar showing the display and controls that interact with the installed controller.
5. 유지관리
The electric scooter controller is a robust electronic component, but proper care ensures its longevity:
- 건조하게 유지하세요: Protect the controller from water and excessive moisture. While some scooters have water resistance, direct exposure can cause damage.
- 깨끗한 연결: Periodically check and clean electrical connections to ensure good contact and prevent corrosion.
- 물리적 손상 방지: Protect the controller from impacts or vibrations that could damage internal components.
- 온도: Operate the scooter within recommended temperature ranges to prevent overheating of the controller.
6. 문제 해결
If you experience issues with your scooter after controller installation, consider the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스쿠터의 전원이 켜지지 않습니다. | Loose battery connection, faulty battery, controller not receiving power. | Check battery connections. Ensure battery is charged. Verify controller power input. |
| 엔진이 스로틀에 반응하지 않습니다. | Loose throttle connection, faulty throttle, motor wires disconnected. | Check throttle and motor wire connections. |
| 속도나 출력이 일정하지 않음. | Loose motor phase wires, Hall sensor issues, low battery voltage. | Inspect motor and Hall sensor connections. Charge battery fully. |
| 오류 코드가 표시됩니다. | 특정 부품의 오작동. | Consult your scooter's user manual for error code definitions and solutions. |
If problems persist after basic troubleshooting, contact customer support.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 제품 유형 | 전동 스쿠터 컨트롤러 |
| 상표 | Kugoo |
| 모델 호환성 | Kugoo ES2, Microgo M5 |
| Max Speed Control | 30km/h |
| 기원 | 중국 본토(절강) |
| 용법 | Electric Scooters, Self-balancing Electric Scooters |
| 고위험 화학물질 | 없음 |
8. 사용자 팁
- 전문적인 설치: If you lack experience with scooter electronics, consider having the controller installed by a qualified technician to avoid damage.
- 확고한 연결: Always double-check that all connectors are fully seated and locked into place. Loose connections are a common cause of intermittent issues.
- 케이블 관리 : After installation, ensure all cables are neatly routed and secured to prevent them from being pinched or damaged during scooter operation.
9. 지원
For technical assistance or further inquiries, please contact our support team:
- Whatsapp/WeChat: +86 19350856924
- 이메일: zlinshow001@163.com
Please have your product details ready when contacting support.
Video 9.1: A general welcome video from the store. For product-specific support, please use the contact information provided above.
