1. 서론
The Antec A37 is a low-profile CPU cooler designed for efficient heat dissipation in compact systems, particularly ITX small cases. It features a push-down pressure design, 4 copper heat pipes, and a 90mm PWM fan to provide powerful cooling performance while maintaining a small footprint. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your CPU cooler.
2. 패키지 내용
패키지에 다음 구성품이 모두 포함되어 있는지 확인하세요.
- A: Intel mounting brackets (x2)
- B: AMD mounting brackets (x2)
- C: Mounting bracket screws (x4)
- D: Mounting nuts (x4)
- E: EVA gaskets (x4)
- F: Thermal paste (x1)
- Antec A37 CPU Cooler with pre-attached 90mm PWM fan
3. 사양
The following table outlines the technical specifications of the Antec A37 CPU Cooler:
| 특징 | Specification (A37) |
|---|---|
| 모델 번호 | A37 |
| 쿨러 유형 | 로우 프로file |
| 제품 크기(L*W*H) | 103*92*37mm |
| 히트파이프 | 4 x φ6mm Copper Tube |
| 방열판 소재 | 알루미늄 핀 |
| 지원되는 CPU 소켓 | Intel LGA 1150, 1151, 1155, 1156, 1200, 1700, 1800; AMD AM4, AM5 |
| 열전도율 | ≤ 130와트 |
| 팬 크기 | 92*92*15mm |
| 팬 속도 | 1000 - 2800 RPM (PWM) ±10% |
| 공기 흐름 | 70 CFM max |
| 소음 수준 | 20~36dBA |
| 팬 커넥터 | 4 핀 PWM |
| 정격 볼륨tage | 12V 직류 |
| 정격 전류 | 0.22A ± 10 % |
| 팬 수명 | 40,000시간 |
4. 설치 가이드
Follow these steps to install your Antec A37 CPU Cooler. For a visual guide, please refer to the installation video below.
Video: Step-by-step installation process for the Antec A37 CPU Cooler.
4.1. 준비
- 컴퓨터의 전원이 꺼져 있고 벽면 콘센트에서 플러그가 뽑혀 있는지 확인하세요.
- 컴퓨터 케이스를 열어 마더보드에 접근하세요.
- Identify your CPU socket type (e.g., LGA1700, AM4) to select the correct mounting brackets.
4.2. 열전도 페이스트 도포
- Clean the surface of your CPU and the cooler's base thoroughly with isopropyl alcohol to remove any dust or old thermal paste.
- Remove the protective film from the cooler's base.
- Apply a small amount of the included thermal paste (F) to the center of your CPU. A pea-sized dot is usually sufficient. Do not spread it manually; the pressure from the cooler will spread it evenly.
4.3. 쿨러 장착
- Attach the appropriate mounting brackets (A for Intel, B for AMD) to the cooler base using the mounting bracket screws (C).
- Place the EVA gaskets (E) over the motherboard's CPU cooler mounting holes from the back of the motherboard.
- Insert the mounting nuts (D) through the motherboard's mounting holes and secure them with the EVA gaskets.
- Carefully align the cooler with the mounting nuts on the motherboard.
- Gently place the cooler onto the CPU, ensuring the mounting holes on the cooler align with the nuts.
- Secure the cooler by tightening the screws on the mounting brackets in a diagonal pattern until snug. Do not overtighten.
- 쿨러의 4핀 PWM 팬 케이블을 마더보드의 CPU_FAN 헤더에 연결하십시오.
5. 운영
Once installed, the Antec A37 CPU Cooler operates automatically. The 4-pin PWM fan connects to your motherboard's CPU_FAN header, allowing the motherboard to control the fan speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise during lighter loads.
- 자동 팬 제어: The fan speed will adjust dynamically between 1000 and 2800 RPM based on your CPU's thermal requirements.
- 저소음 작동: Designed to operate quietly, with noise levels ranging from 20 to 36 dBA.
6. 유지관리
정기적인 유지관리는 CPU 쿨러의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.
- 먼지 청소: Periodically (every 3-6 months, or more frequently in dusty environments) clean the fan blades and heatsink fins. Use compressed air to blow dust out of the fins. For stubborn dust, a soft brush can be used.
- 열전도 페이스트: 어떤 이유로든 쿨러를 분리하는 경우, 재설치하기 전에 CPU와 쿨러 베이스 모두에서 기존 서멀 페이스트를 깨끗이 제거하고 새 서멀 페이스트를 도포하는 것이 좋습니다.
- 팬 검사: Check the fan for any signs of wear, damage, or unusual noise. If the fan is not spinning or making excessive noise, it may need replacement.
7. 문제 해결
If you encounter issues with your Antec A37 CPU Cooler, refer to the following common problems and solutions:
- 팬이 회전하지 않음:
- Ensure the 4-pin PWM cable is securely connected to the motherboard's CPU_FAN header.
- Check your motherboard's BIOS/UEFI settings to ensure the CPU fan control is enabled and configured correctly.
- 팬이 케이블이나 다른 부품에 의해 막히지 않았는지 확인하십시오.
- 높은 CPU 온도:
- Confirm that the cooler is properly seated on the CPU and the mounting screws are tightened evenly.
- Check if sufficient thermal paste was applied and spread correctly. Reapply if necessary.
- Ensure there is adequate airflow within your PC case. Consider adding or repositioning case fans.
- 방열판 핀과 팬 블레이드에 쌓인 먼지를 깨끗이 닦아내십시오.
- 과도한 팬 소음:
- Check for dust buildup on the fan blades and clean them.
- Ensure the fan cable is not hitting the fan blades.
- Verify that the fan is securely mounted and not vibrating against other components.
- If the noise persists, the fan bearing might be worn, and the fan may need replacement.
8. 사용자 팁
Based on user feedback and common questions, here are some helpful tips for your Antec A37 CPU Cooler:
- 호환성: The Antec A37 is designed for a wide range of modern Intel (LGA 1150, 1151, 1155, 1156, 1200, 1700, 1800) and AMD (AM4, AM5) sockets, making it suitable for many conventional PC builds.
- ITX Builds: 저프로파일file design (37mm height) makes it an excellent choice for compact ITX chassis where space is limited. Ensure your case has at least 80mm of CPU cooler clearance for optimal fit and airflow.
- 열 페이스트 적용: Always use a fresh application of thermal paste when installing or reinstalling the cooler to ensure maximum heat transfer efficiency.
- LGA2011 Sockets: Please note that this cooler is not officially listed as compatible with LGA2011 sockets. Refer to the specifications for supported platforms.
9. 보증 및 지원
Antec products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Antec web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
