Cecotec Total Iron 7000 SteamPro Compact Ironing Center

1. 중요한 안전 정보

Please read these instructions carefully before using the appliance. Please keep this instruction manual for future reference or for new users.

• 전원 볼륨을 확인하세요tage는 vol과 일치합니다tag제품 기능 라벨에 표시되어 있고 플러그가 접지되어 있는지 확인하십시오.
• 이 기기는 가정용으로만 제작되었습니다. 상업용 또는 산업용으로 적합하지 않습니다.
• 제품을 열원, 인화성 물질, 젖은 표면 근처에 두지 마십시오. 제품이 물에 빠지거나 물에 젖지 않도록 주의하고, 물이나 기타 액체와 접촉하지 않도록 하십시오. 실외에서 사용하지 마십시오.
• 제품 작동 중 표면 온도가 높아질 수 있습니다. 사용 중에는 제품을 방치하지 마십시오.
• 전원 코드에 눈에 띄는 손상이 있는지 정기적으로 점검하십시오. 케이블이 손상된 경우, 모든 종류의 위험을 방지하기 위해 반드시 Cecotec 공식 기술 서비스 센터에서 교체해야 합니다.
• 제품은 항상 평평한 곳에 놓으십시오. 제품을 덮거나 위에 물건을 올려놓지 마십시오.
• 전원 코드를 비틀거나, 구부리거나, 무리하게 힘을 주거나, 어떤 식으로든 손상시키지 마십시오. 날카로운 모서리나 열원으로부터 보호하십시오. 뜨거운 표면에 닿지 않도록 하십시오.
• 전선이 작업대 가장자리에 걸쳐지지 않도록 하십시오.
• 전원 코드, 플러그 또는 제품의 분리할 수 없는 부품을 물이나 기타 액체에 담그지 마십시오. 또한 전기 연결부를 물에 노출시키지 마십시오.
• 플러그를 만지거나 제품의 전원을 켜기 전에 손이 완전히 말랐는지 확인하십시오.

2. 제품 오버view

The Cecotec Total Iron 7000 SteamPro is an ultra-powerful compact ironing center designed to tackle even the most stubborn wrinkles with ease. It combines high performance with user-friendly features for efficient and effective ironing.

Figure 1: Cecotec Total Iron 7000 SteamPro Ironing Center

주요 특징:

• 높은 전력: 2400 W for rapid heating.
• 고압: 6 bars of pressure for effective wrinkle removal.
• 연속 증기: 135 g/min steam output for professional results.
• 열판: Ultra-slippery Turbo Slide ceramic soleplate for smooth gliding.
• 에코 모드: Saves up to 25% energy.
• 대형 물 탱크: 2.0 L capacity for extended ironing sessions (up to 3 hours).
• 정밀 팁: Designed to reach difficult areas of garments.
• 드립 방지 시스템: 옷에 물 얼룩이 생기는 것을 방지합니다.
• Cyclo Clean Self-Cleaning System: Extends the lifespan of the ironing center by preventing limescale buildup.
• Auto Shut-Off System: 자동으로 전원이 꺼져 안전성이 향상됩니다.
• DeepClean Spray: Helps lift deeper wrinkles.

3. 설정

1. 짐 풀기: Carefully remove the ironing center from its packaging. Retain all packaging materials for future storage or transport.
2. 놓기: Place the ironing center on a stable, flat, and heat-resistant surface. Ensure there is adequate space around the unit for safe operation.
3. 물탱크 채우기: The ironing center features a large 2.0 L water tank. Fill the tank with clean tap water. Do not overfill beyond the 'MAX' indicator. Ensure the tank is securely closed after filling.
4. 전원 연결: Plug the power cord into a grounded electrical outlet. Verify that the mains voltage는 기기의 요구 사항과 일치합니다.

4. 사용 설명서

Figure 2: Ironing with steam

1. 전원 켜기: Turn on the ironing center using the designated power button. Allow a few moments for the iron to heat up. The 2400W power ensures quick heating.
2. 온도 조절: Adjust the temperature setting according to the fabric type of your garment. Refer to the garment's care label for recommended ironing temperatures.
3. 스팀 기능: Once the desired temperature is reached, activate the steam function. The iron delivers 135 g/min of continuous steam for efficient wrinkle removal.
4. 에코 모드: For energy saving, select the Eco mode. This mode reduces energy consumption by up to 25% while still providing effective ironing results.
5. DeepClean Spray: For particularly stubborn wrinkles, use the DeepClean spray function to moisten the fabric before ironing.
6. 정밀 다림질: Utilize the precision tip of the Turbo Slide ceramic soleplate to iron around buttons, collars, and other intricate areas of your garments.
7. 자동 차단 : The appliance is equipped with an auto shut-off system for safety. It will automatically turn off if left unattended for a period.
8. 지속적인 사용: The 2.0 L water tank allows for extended ironing sessions, up to 3 hours, without the need for refilling.

그림 3: 상향식 view of the iron during use

5. 유지관리

Figure 4: Iron with AntiCalc feature

• Cyclo Clean Self-Cleaning System: The ironing center features a Cyclo Clean self-cleaning system to prevent limescale buildup. Follow the instructions in the full manual (if available) for specific steps on how to activate and perform this cleaning cycle. Regular use of this system will maintain optimal performance and extend the life of your appliance.
• 드립 방지 시스템: The integrated anti-drip system helps keep your garments free from water stains, reducing the need for additional cleaning of the soleplate due to drips.
• 발판 세척: To clean the Turbo Slide ceramic soleplate, ensure the iron is unplugged and completely cool. Wipe the soleplate with a damp cloth and a mild, non-abrasive cleaner if necessary. Do not use harsh chemicals or abrasive pads.
• 외부 청소: Wipe the exterior of the ironing center with a soft, damp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
• 저장: When not in use, ensure the ironing center is cool and empty of water. Store it in a dry, safe place, away from children.

6. 문제 해결

If you encounter any issues with your Cecotec Total Iron 7000 SteamPro, please consider the following basic troubleshooting steps:

• 기기가 켜지지 않음: Ensure the power cord is securely plugged into a functional, grounded electrical outlet. Check if the power button is pressed.
• 증기가 없거나 증기가 충분하지 않음: Check if the water tank is filled to the appropriate level. Ensure the iron has reached the correct temperature setting for steam generation.
• 물이 새는 중: Ensure the water tank cap is securely closed. Verify that the temperature setting is high enough for steam to be generated, as low temperatures can cause water to drip.
• 다리미가 가열되지 않음: Confirm the appliance is plugged in and turned on. If the issue persists, there might be an internal fault.

For more complex issues or if troubleshooting steps do not resolve the problem, please contact Cecotec's official technical service.

7. 사양

8. 보증 및 지원

For any issues, repairs, or replacement parts, please contact the official Cecotec technical service. If the power cord is damaged, it must be replaced by the official Cecotec technical service to avoid any type of danger. Please retain your proof of purchase for warranty claims.