KOKKO FLD-1 루퍼 드럼 일렉트릭 기타 이펙트 페달 사용 설명서

소개

The KOKKO FLD-1 is a versatile electric guitar effect pedal combining a looper, drum machine, and tuner into a compact metal housing. Designed for guitarists, it offers a range of features to enhance practice, performance, and creativity. This manual provides detailed instructions for setting up, operating, and maintaining your FLD-1 pedal.

Figure 1: KOKKO FLD-1 Pedal Overview

패키지 내용

• KOKKO FLD-1 Looper Drum Effect Pedal
• USB 케이블
• 사용 설명서 (본 문서)

그림 2: 포함된 패키지 내용

제어 및 연결

Familiarize yourself with the various controls and connection points on your FLD-1 pedal.

Figure 3: Product Interface Diagram

전면 패널 컨트롤:

• Looper Volume Knob: 녹음된 반복 재생의 볼륨을 조절합니다.
• Drum Volume Knob: 드럼 머신의 볼륨을 조절합니다.
• Looper Footswitch: Controls looper functions (record, play, overdub, undo/redo).
• 드럼 풋스위치: Controls drum machine functions (start/stop, drum kit selection).
• SYNC 버튼: Tap to synchronize looper and drum machine.
• 디스플레이 화면: Shows current mode, drum kit number, tuner information, etc.
• LED 표시등 (1, 2, 3, 4): Indicate looper modes or drum patterns.

후면 패널 연결:

• 입력(1/4" 모노 잭): 기타나 다른 악기를 연결하세요.
• 출력(1/4" 모노 잭): 당신에게 연결 amplifier 또는 기타 오디오 장비.
• USB 포트(Type-C): For connecting to a computer for firmware updates, managing loops, or using the Free APP.
• 헤드폰 잭(3.5mm): 조용한 연습을 위해.
• DC 9V 입력: 9V DC 전원 어댑터(중앙 음극)를 연결하십시오.

그림 4: 후면 패널 연결

설정

1. 전원 연결: Connect a standard DC 9V (center negative) power adapter to the DC 9V input jack on the rear of the pedal. The pedal does not operate on batteries.
2. 계기 연결: Connect your electric guitar or other instrument to the "IN" jack using a 1/4" mono instrument cable.
3. 출력 연결: "OUT" 잭을 귀하의 장치에 연결하십시오. amplifier, audio interface, or other audio equipment using a 1/4" mono instrument cable.
4. 헤드폰(선택 사항): For silent practice, connect 3.5mm headphones to the headphone jack.
5. USB 연결(선택 사항): Connect the USB port to your computer using the provided USB cable for advanced features or software updates.

전원을 켜기 전에 모든 연결이 안전한지 확인하십시오. amplifier 또는 오디오 시스템.

작동 지침

전원 켜기/끄기

• The pedal powers on automatically when connected to a 9V DC power supply.
• To power off, simply disconnect the power supply.

튜너 모드

• To activate the tuner, hold the Drum footswitch for 3 seconds.
• The display will show tuning information.
• Play a single note on your instrument; the display will indicate if the note is flat, sharp, or in tune.
• To exit tuner mode, press either footswitch briefly.
• The pedal features 10 Tuner modes.

드럼 머신

• To activate the drum machine, hold the Drum footswitch for 1 second.
• The display will show the current drum kit number.
• Press the Drum footswitch briefly to start or stop the drum pattern.
• Rotate the Drum Volume knob to adjust the drum volume.
• The pedal includes 30 different drum kits. Use the SYNC button or other controls (not explicitly detailed in provided data, but implied by "30 Types of drums" and "Product interface" diagram) to cycle through drum kits.

루퍼 기능

• 기록: Press the Looper footswitch once to start recording. The LED indicator will typically turn red.
• 재생: Press the Looper footswitch again to stop recording and start playback. The LED indicator will typically turn green.
• 오버더빙: During playback, press the Looper footswitch once to start overdubbing. The LED indicator will typically blink red/green.
• 중지: During playback or overdubbing, double-press the Looper footswitch to stop.
• 실행 취소/다시 실행: During playback, hold the Looper footswitch for 1 second to undo the last overdub. Hold again to redo.
• 분명한: When the looper is stopped, hold the Looper footswitch for 2 seconds to clear the loop.
• Rotate the Looper Volume knob to adjust the loop playback volume.
• The pedal features 4 Looper modes.

동기화(SYNC)

• Press the SYNC button to synchronize the looper and drum machine tempo. This ensures your loops play in time with the selected drum pattern.

Free APP

The KOKKO FLD-1 pedal supports a Free APP for enhanced control and functionality. Connect the pedal to your computer via the USB port to utilize the app. The app may offer features such as managing loops, editing drum patterns, or accessing additional settings.

Figure 5: Free APP Interface (part of the detailed product image)

유지

• 청소: 부드럽고 마른 천으로 페달을 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 저장: 페달은 건조하고 온도 변화가 심한 곳이나 직사광선을 피해 보관하십시오.
• 힘: 페달을 장기간 사용하지 않을 때는 항상 전원 어댑터를 분리하십시오.
• 사이: Periodically check all cables and connections for wear and tear.

문제 해결

명세서

참고 : 사양은 예고없이 변경 될 수 있습니다.

사용자 팁

• 전원 공급 장치: Always use a regulated 9V DC (center negative) power supply to avoid damage and ensure optimal performance.
• 케이블 품질: Use high-quality instrument cables to minimize noise and signal loss.
• Experiment with Drum Kits: Explore all 30 drum kits to find the perfect rhythm for your practice or performance.
• Looping Practice: Start with simple loops to get comfortable with the timing of recording, playback, and overdubbing.
• 헤드폰 사용: The headphone output is great for quiet practice sessions without disturbing others.
• USB 연결: Connect to a computer and check for the official KOKKO/M-VAVE app or software for potential firmware updates and extended features.

보증 및 지원

For warranty information and technical support, please refer to the official KOKKO or M-VAVE web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.