Imagebon Android 13 Car Stereo Wireless CarPlay & Android Auto GPS Navigation Rearview 미러 카메라 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Imagebon Android 13 Car Stereo DVR. This device integrates advanced features such as Android 13 operating system, wireless CarPlay and Android Auto, GPS navigation, and a rearview mirror camera, designed to enhance your driving experience.

제품의 올바른 작동과 안전을 위해 사용 전에 본 설명서를 꼼꼼히 읽어 주십시오.

2. 안전 정보

• Do not squeeze or apply excessive force to the dash cam.
• If the device exhibits abnormal behavior or "fault" messages, do not attempt to operate it. Refer to the troubleshooting section.
• For installation, especially wiring of the rear camera, it is highly recommended to seek assistance from a professional installer to prevent damage to the recorder or vehicle.
• Ensure all connections are made in strict accordance with the instructions to avoid electrical hazards or device malfunction.
• If the displayed camera picture is inverted, contact support for assistance.
• 이 제품에는 고위험 화학 물질이 포함되어 있지 않습니다.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 10.26인치 DVR 유닛 1개
• 3M 접착식 마운트 1개
• 1 x 자동차 충전기
• 1 x GPS Antenna (3m)
• 1 x 사용자 설명서
• 1 x Rear Camera (Optional, may vary by model)
• 1 x AUX Line (for models without front camera)

4. 사양

Note: Specifications may vary slightly depending on the specific model (e.g., E8, E64) and included accessories (e.g., with/without front camera, TF card memory).

5. 설치 가이드

Follow these steps to install your Imagebon Car Stereo DVR:

5.1 Mounting the DVR Unit

The DVR unit can be mounted using various brackets. Choose the one that best suits your vehicle and preference.

1. 자동차 엔진을 끄세요.
2. Lock the DVR's screen onto your chosen mount (e.g., 3M Sticky Mount, Suction Mount, or Telescopic Bracket).
3. Fix the mounted DVR screen securely on your dashboard or windshield. Adjust the view필요에 따라 각도를 조정합니다.

5.2 SD 카드 삽입

4. Insert a high-speed TF (Micro SD) card (Class 10 or above, minimum 8GB, maximum 256GB) into the dash cam's TF card slot.

5.3 전원 연결

5. Insert the car charger into your car's cigarette lighter socket.
6. Connect the USB port of the dash cam to the car charger using the provided charging extension cable. Route the cable neatly along the edge of the windshield to avoid obstruction.

5.4 후방 카메라 설치 (선택 사항)

사용하시는 모델에 후방 카메라가 포함되어 있다면 다음 단계를 따르세요.

7. Install the rear camera on the rear of the vehicle, paying attention to its orientation. The cable can be routed along the roof of the vehicle.
8. Connect the rear camera plug to the rear camera jack (2.5MM, 4-segment) on the DVR unit.
9. Connect the red wire from the rear camera cable to your car's back-up light for automatic reversing view 활성화.

5.5 최종 점검

10. Adjust the lens position of the DVR unit to ensure it is level and captures the desired view.
11. Start the engine and verify that the device is installed correctly. The system working indicator should light up, and the device should automatically enter recording mode with the recording indicator light flashing.
12. Check the display screen to ensure the picture is normal. If the picture is inverted, refer to the troubleshooting section or contact support.

6. 운영 가이드

6.1 전원 키 기능

• 전원 켜기/끄기: In the off state, press and hold the power button for 3 seconds to turn on the device. In the power-on state, press and hold for 3 seconds to save the video file 종료합니다.
• Screen Saver/Backlight: Short press the power button to enter screen saver (HUD mode). Short press again to sleep and turn off the backlight. Short press a third time to light up the screen.
• 재설정 : If the recorder crashes, locate the reset hole on the back of the fuselage and short press it to return to normal operation.

6.2 메인 인터페이스view

The main interface provides access to various applications and functions.

6.3 핵심 기능

• 항해: Click the "Navigation" icon to enter the default map application. Long press to select other navigation apps.
• File 관리자: "를 클릭하세요File"관리 아이콘" files (copy, paste, delete) on the device.
• 미러 링크: Click the "Mirror Link" icon to activate wireless projection, mirroring your phone's screen to the DVR.
• CarPlay(iOS용): Click the "CarPlay" icon to access CarPlay functions.
• 안드로이드 오토(안드로이드용): Click the "Android Auto" icon to access Android Auto functions.
• 카메라: Click the "Camera" icon to open the full-screen streaming media rearview 미러 프리view.
• 오디오 출력: Click the "Audio Out" icon to select audio output methods.

6.4 오디오 출력 방법

The device supports four audio output methods:

1. 네이티브 오디오: Use the built-in speaker. Control with the "OFF/ON" switch in Audio Out settings.
2. 보조 오디오: Connect the device to your car's AUX input using an AUX cable. Ensure your car's audio input is switched to AUX. (Note: The 6.86 inch version may not support AUX Audio function).
3. FM 전송:
   • In Audio Out settings, switch to "FM" mode.
   • Adjust the FM frequency on the device.
   • Turn on your car's FM radio and tune it to the same empty frequency band as the device.
4. BT Audio (Dual Bluetooth 5.1):
   • Connect your phone to the device via Bluetooth.
   • Supports hands-free calling, Bluetooth music playback, and voice broadcast.

   

6.5 멀티미디어 재생

The device supports playing video, music, and viewing images from a U disk (USB flash drive).

• 동영상: Supports MP4, MOV, 3GP, MKV, FLV, WMV. Does not support 2K and 4K resolution videos, VOB, RMVB, MPG.
• 음악: Supports MP3, OGG, AAC, FLAC, WAV. Does not support WMA, APE.
• 영화: Supports JPG, BMP.
• Playback Behavior: If music is playing and the device is turned off, it will resume automatically when turned on. If paused, it will remain paused.

Note: The 6.86 inch version does not have U disk local playback function.

6.6 분할 화면 표시

The device supports split-screen functionality, allowing you to run two applications simultaneously.

To activate split-screen: Open the first application (e.g., Audio Out), then open the second application (e.g., Navigation map). Long press the "Navigation Bar" icon (three horizontal lines) to select the desired split-screen layout.

6.7 실시간 역추적 View

When reversing, the DVR will automatically display the rear camera view 가이드라인이 포함되어 있습니다.

사전view 화면 왼쪽을 밀어서 안내선의 위치를 ​​조절함으로써 각도를 조정할 수 있습니다.

7. 시스템 설정

Access the system settings interface by clicking the "Settings" icon on the main screen.

7.1 Wireless & Network

• 와이파이: Turn Wi-Fi on/off. The system will scan for available networks. Click on a network name to connect. Enter the password for encrypted networks.
• 블루투스: Turn Bluetooth on/off. Connect to your car's Bluetooth for hands-free calls and music.

7.2 앱 및 알림

Manage installed applications. You can view downloaded apps, apps in internal storage, running apps, and uninstall programs.

7.3 보관

View total capacity, available space, and used space for application storage and data. If a TF card or USB storage device is inserted, its capacity and usage will also be displayed.

7.4 System Preferences

• 언어 및 입력: Set the device language and input method.
• 날짜 및 시간: Set date, time, time zone, and 24-hour format. You can choose to automatically determine these settings via the network or set them manually.
• 재설정 옵션: Reset WLAN, mobile data network, Bluetooth settings, or application preferences. You can also clear all application data (restore factory settings).
• 장치 정보 : View device information such as system upgrade status, device name, IP address, WLAN MAC address, product model, Android version, firmware version, kernel version, and processor type.

8. 사용자 팁

• For optimal performance of CarPlay and Android Auto, ensure your phone's operating system is up to date.
• Regularly clear cached data from apps to maintain smooth operation, especially if you notice slowdowns.
• When using FM transmission, select an empty frequency on your car radio to minimize interference and ensure clear audio.
• To extend the life of your TF card, consider formatting it periodically (after backing up important recordings).
• Check your specific model variant (e.g., E8, E64) for included features like front cameras or specific memory configurations, as these can vary.

9. 문제 해결

• Device unresponsive/crashed: Locate the reset hole on the back of the unit and short press it. If the issue persists, press and hold the power button for 9 seconds to force a restart.
• Inverted rear camera image: This indicates an incorrect installation or setting. Please contact customer support for guidance.
• 오디오 출력 없음: Check the selected audio output method in settings. Ensure AUX cable is properly connected if using AUX, or FM frequency is correctly matched if using FM transmission. Verify Bluetooth connection for BT Audio.
• Wi-Fi/블루투스 연결 문제: Ensure Wi-Fi/Bluetooth is enabled in settings. Try resetting network settings if problems persist.
• Apps not installing/running: Check available storage space. Ensure apps are compatible with Android 13.

10. 보증 및 지원

For detailed warranty information and customer support, please refer to the official documentation provided with your product. A comprehensive user manual in PDF format is available for download:

View 사용 설명서 (PDF)

You can also contact Imagebon customer service for technical assistance or product inquiries.