소개
Thank you for choosing the K-1028E Universal Air Conditioner Remote Control. This remote is designed for ease of use and broad compatibility, capable of controlling over 1000 different air conditioner brands worldwide. It features a large LCD display, a built-in clock, and on/off timer functions for convenient climate management.
This remote control is compatible with approximately 99% of air conditioner brands, offering a control distance of about 8-10 meters.
설정
1. 배터리 설치
- 리모컨 뒷면의 배터리실 커버를 엽니다.
- AAA 배터리 2개를 삽입하십시오. 이때 극성(+/-)을 반드시 확인하십시오. 배터리는 포함되어 있지 않습니다.
- 배터리 덮개를 단단히 닫으세요.
2. 원격 제어 프로그래밍
The K-1028E remote can be programmed using either manual code entry or an automatic search function.
Manual Code Entry (Recommended)
- Turn on your air conditioner manually.
- Locate the brand code for your air conditioner in the provided code list (usually included with the remote, or available online).
- Press and hold the 'SET' button on the remote for approximately 3 seconds until the code on the LCD screen starts flashing.
- Use the 'TEMP ▲' or 'TEMP ▼' buttons to input the 3-digit code for your air conditioner brand.
- Once the correct code is displayed, press the 'OK' button to confirm. The code will stop flashing.
- Test the remote by pressing the 'ON/OFF' button. If the air conditioner responds, the setup is complete. If not, try the next code for your brand or proceed to automatic search.
자동 검색
- Turn on your air conditioner manually.
- Point the remote control towards the air conditioner.
- Press and hold the 'SET' button for approximately 6 seconds until the code on the LCD screen starts flashing and automatically searching.
- The remote will send out different codes. Pay close attention to your air conditioner.
- As soon as your air conditioner responds (e.g., turns on/off, changes mode), immediately press the 'OK' button to stop the search and save the code.
- Test the remote's functions. If all functions work correctly, the setup is complete. If not, repeat the automatic search process.
작동 지침
Once programmed, the remote control offers various functions for your air conditioner:
- 켜기/끄기: 눌러 에어컨을 켜거나 끕니다.
- 온도 ▲/▼: 온도 설정을 위 또는 아래로 조정하세요.
- 오시는 길 : 작동 모드(예: 냉방, 난방, 송풍, 제습, 자동)를 순환하며 선택해 보세요.
- 바람: 팬 속도를 조절하세요 (예: 낮음, 중간, 높음, 자동).
- 전자열: Activates electric heating function (if supported by AC).
- 빛: Turns the display light on/off.
- M.SWING / A.SWING: Controls horizontal (Manual) and vertical (Auto) swing of the air deflector (if supported by AC).
- 근무 시간 / 휴식 시간: 에어컨이 자동으로 켜지거나 꺼지도록 타이머를 설정하세요.
- F.Cool / F.Heat: Activates fast cooling or fast heating modes (if supported by AC).
- 시계: 리모컨 화면에 현재 시간을 설정하세요.
- 세트: Used for programming and accessing settings.
- OK : 선택 사항과 설정을 확인합니다.
유지
- 청소: 리모컨은 부드럽고 마른 천으로 닦으세요. 액체 세제나 연마제는 사용하지 마세요.
- 배터리 교체: Replace batteries when the remote's range decreases or the display becomes dim. Always replace both batteries at the same time with new AAA batteries.
- 저장: If the remote will not be used for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place away from direct sunlight.
- 낙하 방지: Handle the remote with care to prevent damage from drops or impacts.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Remote not responding / AC not responding | Dead or incorrectly inserted batteries; Remote not programmed correctly; Obstruction between remote and AC unit. | Check and replace batteries; Re-program the remote using manual or automatic search; Ensure clear line of sight to the AC unit's receiver. |
| Limited control distance | Weak batteries; Obstruction; Interference. | Replace batteries; Remove obstructions; Minimize electronic interference. |
| AC functions not working correctly | Incorrect code programmed; AC unit does not support the specific function. | Try another code for your AC brand; Some advanced functions may not be universally supported by all AC models. |
| Remote does not work with a specific AC brand (e.g., Westpoint, Family, Mitsubishi msz-hr35vf, Mirage, Fujitsu) | Code not found or not compatible with specific model. | While compatible with 99% of brands, some specific models may not be supported. Ensure you have tried all available codes for the brand and the automatic search function. If issues persist, the model may not be compatible. |
명세서
- 모델 번호: K-1028K
- 재료: ABS(아크릴로니트릴부타디엔스티렌)
- 제어 거리: 약 8-10미터
- 전원 공급 장치: AAA 배터리 2개 (포함되지 않음)
- 스타일: 모던 스타일
- 기원: 중국 본토, 광둥
사용자 팁
- Keep Code List Handy: If a code list was provided with your remote, keep it in a safe place. It will be useful if you ever need to re-program the remote.
- Auto-Search as a Last Resort: While manual code entry is often quicker if you know your brand's codes, the automatic search function is a reliable alternative if you cannot find your specific code or brand.
- 시선: Always ensure there is a clear line of sight between the remote control and your air conditioner's infrared receiver for optimal performance.
보증 및 지원
This product is designed for reliability and ease of use. For any issues not covered in this manual or for further assistance, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.
