소개
This manual provides detailed instructions for the installation, operation, and maintenance of your M6H Electric Bike LCD Display Meter and 36V 350W Sine Wave Controller. Please read this manual carefully before use to ensure proper function and longevity of your product.
설정 및 설치
The M6H LCD Display and Sine Wave Controller are designed for universal electric bike and scooter applications. Professional installation is recommended due to the electrical nature of the components.
패키지 내용:
- 1 x M6H LCD Display
- 1 x 36V 350W Sine Wave Controller
설치 단계:
- LCD 디스플레이를 장착하세요: Securely attach the M6H LCD Display to your bicycle handlebar. The display is compatible with handlebar sizes 22.2MM, 25.4MM, 28.6MM, and 31.8MM. Ensure the display is positioned for optimal visibility and accessibility.
- 컨트롤러를 연결합니다: The Sine Wave Controller features multiple color-coded wires for connection to the motor, battery, display, throttle, and other e-bike components. Carefully match each wire to its corresponding function on your e-bike system. Refer to your e-bike's wiring diagram for specific connections.
- LCD 디스플레이를 컨트롤러에 연결하세요: Connect the communication cable from the M6H LCD Display to the designated port on the Sine Wave Controller. The communication method is UART.
- 모든 연결을 보호하세요: Ensure all electrical connections are tight and properly insulated to prevent short circuits or damage.
- 초기 전원 켜기: After all connections are made, power on your e-bike system. The LCD display should illuminate and show initial readings.
작동 지침
The M6H LCD Display provides essential information and control over your electric bike's functions.
디스플레이 기능 :
- 속도 표시: 현재 주행 속도를 표시합니다.
- 배터리 표시기: 배터리 잔량 수준을 표시합니다.
- 부스트 기능: Activates a power boost mode.
- 부스트 기어: Indicates the current level of pedal assist (PAS).
- 소계 주행거리/총 주행거리: Tracks trip distance and total distance traveled.
- 러닝타임: 현재 라이딩의 지속 시간을 보여줍니다.
- Metric Conversion: Allows switching between metric (km/h, km) and imperial (mph, miles) units.
- 오류 프롬프트: Displays error codes or warnings if issues are detected.
USB 충전 기능:
The display is equipped with a USB charging port, providing 5V/500MA output for charging small electronic devices.
유지
Regular maintenance ensures the optimal performance and longevity of your M6H display and controller.
- 디스플레이 청소: 부드러운 d를 사용하세요amp cloth to gently wipe the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
- 요소로부터 보호: While designed for outdoor use, avoid prolonged exposure to heavy rain or direct water spray. Ensure the display and controller are kept as dry as possible.
- 연결 확인: 배선 연결부가 안전하고 부식이나 손상이 없는지 정기적으로 점검하십시오.
- 충격 방지: Protect the display from physical impact or drops, which can cause internal damage or screen cracks.
문제 해결
If you encounter issues with your M6H LCD Display or Sine Wave Controller, refer to the following common problems and solutions:
- 디스플레이 전원이 켜지지 않음:
- 배터리에서 컨트롤러로 연결되는 주전원 연결을 확인하세요.
- Ensure the connection between the display and controller is secure.
- 전기자전거 배터리의 충전량이 충분한지 확인하십시오.
- Incorrect Speed or Mileage Readings:
- Check the speed sensor connection to the controller and ensure the sensor is properly aligned with the magnet on the wheel.
- Confirm that the wheel circumference setting (if adjustable) is correct.
- Motor Not Responding or Irregular Power:
- Check all motor phase wire connections and Hall sensor connections to the controller.
- Ensure the throttle or PAS sensor is correctly connected and functioning.
- The display's 'Fault Prompt' may indicate a specific error code. Consult a professional or your e-bike's main manual for interpretation of these codes.
- USB 충전이 작동하지 않습니다.
- Ensure the e-bike system is powered on.
- Check the USB cable and the device being charged.
For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to consult a qualified e-bike technician.
명세서
| 특징 | 사양 |
|---|---|
| 제품 모델 | M6H LCD Instrument + Sine Wave Controller |
| 적응형 볼륨tage | 24V / 36V / 48V / 60V |
| 컨트롤러 전원 | 350와트 |
| 쉘 소재 | ABS and Metal Parts |
| 통신 방법 | 유아트 |
| USB 충전 출력 | 5V / 500MA |
| 색상 | 검은색 |
| Display Dimensions (L x W x H) | 98.1 x 61.9 x 24.6mm |
| Applicable Handlebar Sizes | 22.2MM / 25.4MM / 28.6MM / 31.8MM |
| 패키지 무게 | 약 0.51kg |
| 패키지 치수(L x W x H) | 12 x 8 x 5cm |
사용자 팁
- Always ensure your e-bike's battery is fully charged before long rides to maximize the utility of the display and controller.
- Familiarize yourself with the display's various modes and settings to optimize your riding experience.
- Keep the display screen clean for clear visibility, especially in bright sunlight.
- If you notice any unusual behavior or error messages, refer to the troubleshooting section or consult a professional.
보증 및 지원
For any product-related inquiries, technical support, or warranty claims, please contact your original seller or the manufacturer. Keep your purchase receipt as proof of purchase.
Please note that product appearance, color, and printed text may vary slightly due to different manufacturing batches, but this will not affect the product's functionality or use.
