COMICA BoomX-D PRO Wireless Lavalier Microphone User Manual

1. 제품 오버view

The COMICA BoomX-D PRO is a 2.4G Digital Dual-channel Wireless Lavalier Microphone system designed for high-quality audio recording. It features 8GB internal recording capacity, one-click intelligent noise cancellation, and broad compatibility with cameras, camcorders, smartphones, and computers. It is ideal for various applications such as daily video shooting, live streaming, and interviews.

주요 특징:

• 2.4G 디지털 듀얼 채널 무선 마이크, 글로벌 자유 주파수
• 48kHz/16bits Audio Recording, One-click Intelligent Denoise
• Support On-board Recording with 8G Internal Memory (Approx. 24 Hours)
• 녹음 지원 File고속 전송 및 복사
• Support Digital & Analog Output Mode, Universal for Camera, Phone, and PC
• 후반 작업에서 최고의 유연성을 위한 안전 채널
• Visual Power, Audio Dynamic Monitor, and Other Display Functions
• M/S Switch, Real-time Audio Monitor, Mute, and Volume Control
• 내부 및 외부 MIC XNUMX가지 입력 모드
• RF 기술, 자동 주파수 조정, 안정적인 전송
• Low Latency < 20ms, Working Range Up to 300m (Open Area)
• 다기능 벨트 클립 및 컴팩트 설계

2. Important Safety Information and Notices

일반 공지사항:

• Due to 2.4G wireless characteristics, it's recommended to keep the transmitter and receiver face-to-face during use. Avoid turning your back to the receiver, as this may cause signal dropouts.
• Do not block the antenna position to ensure optimal signal reception.
• The transmitter's audio dynamic bar will not display when it is not connected to the receiver.
• The STEREO function is not available when operating in single-channel or safety mode.
• For continuous recording, a new recording file is saved every 2 hours. The total recording time is 24 hours. Once the 8GB memory is full, new recordings will overwrite the oldest files.
• The recording and copy functions cannot be used simultaneously.
• This product is a high-precision instrument; avoid dropping, colliding, or pounding it.
• Do not use this equipment near heat sources or interference sources such as radiators, ovens, refrigerators, air conditioners, smartphones, or Wi-Fi access points.
• If the pick-up distance is short or when used outdoors, attach the wind muff to prevent sound bursts and reduce wind noise.
• Do not use the equipment in rain or damp environments to prevent short-circuit hazards.
• Always store the product in a dry environment.

FCC 성명:

이 장치는 FCC 규정의 제15부를 준수합니다. 작동은 다음 두 가지 조건에 따릅니다. (1) 이 장치는 유해한 간섭을 일으키지 않아야 합니다. (2) 이 장치는 원치 않는 작동을 일으킬 수 있는 간섭을 포함하여 수신된 모든 간섭을 수용해야 합니다.

참고: 이 장비는 FCC 규정의 파트 15에 따라 테스트를 거쳐 클래스 B 디지털 장치에 대한 제한을 준수하는 것으로 확인되었습니다. 이러한 제한은 주거용 설치에서 유해한 간섭에 대한 합리적인 보호를 제공하도록 설계되었습니다. 이 장비는 무선 주파수 에너지를 생성하고 방출할 수 있으며 지침에 따라 설치 및 사용하지 않을 경우 무선 통신에 유해한 간섭을 일으킬 수 있습니다. 그러나 특정 설치에서 간섭이 발생하지 않는다는 보장은 없습니다. 이 장비가 라디오 또는 텔레비전 수신에 유해한 간섭을 일으키는 경우(장비를 껐다가 켜서 확인할 수 있음) 사용자는 다음 조치 중 하나 이상으로 간섭을 수정하는 것이 좋습니다.

• 수신 안테나의 방향을 바꾸거나 위치를 바꾸세요.
• 장비와 수신기 사이의 거리를 넓힙니다.
• 수신기가 연결된 것과 다른 회로의 콘센트에 장비를 연결하세요.
• 도움이 필요하면 딜러나 숙련된 라디오/TV 기술자에게 문의하세요.

규정 준수에 대한 책임이 있는 당사자의 명시적인 승인 없이 변경이나 수정을 하는 경우, 장비를 작동할 수 있는 사용자의 권한이 무효화될 수 있습니다.

FCC 방사선 노출 성명:

이 장치는 통제되지 않은 환경에 대해 설정된 FCC RF 방사선 노출 한도를 준수합니다. 이 송신기는 다른 안테나 또는 송신기와 함께 배치되거나 작동해서는 안 됩니다.

IC 성명:

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage. (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

3. 패키지 내용

The COMICA BoomX-D PRO package includes the following items:

Image: What's in the Box - Main units and accessories.

• Transmitter (TX) x 2 (for D2 model) or x 1 (for D1 model)
• 수신기(RX) 1개
• 3.5mm 마이크 오디오 입력 케이블
• 바람 머프
• 3.5mm TRS-TRRS Audio Cable (for Smartphone)
• 3.5mm TRS-TRS Audio Cable (for Canon, Nikon, etc.)
• 3.5mm TRS-TRS Audio Cable with Impedance (for Sony, Panasonic, Fujifilm, etc.)
• 3-in-1 Charging/Output Cable (orange cable for charging and data transmission, black cables for charging only)
• 운반 케이스
• 사용자 설명서
• 보증 카드
• 핀 재설정

4. 구성 요소 및 제어

4.1. 송신기(TX)

Image: Transmitter (TX) diagram.

1. 외부 마이크 잠금 버클
2. 외부 마이크의 3.5mm TRS 포트
3. 내부 마이크
4. 전원/음소거 버튼
5. 노이즈 제거/페어링 버튼
6. 벨트 클립
7. USB-C 충전/복사 포트
8. REC 버튼

4.2. 수신기(RX)

Image: Receiver (RX) diagram.

1. 3.5mm TRS/TRRS 모니터링 헤드폰 포트
2. 3.5mm TRS 오디오 출력 포트
3. 전원/모노/스테레오/안전 모드 전환 버튼
4. 채널 출력 게인 제어/페어 버튼
5. B 채널 출력 게인 제어/페어 버튼
6. 벨트 클립
7. USB-C 충전/출력 포트

4.3. Screen Display Instructions

Transmitter (TX) Screen:

Image: Transmitter (TX) screen display details.

• 음소거: Microphone output is muted.
• Microphone Normal Working: 마이크가 활성화되어 있습니다.
• 노이즈 제거: Noise reduction is active.
• Denoise Off: Noise reduction is off.
• 페어링되지 않음 : Not connected to receiver.
• ... in the Pairing: Currently attempting to pair.
• 페어링: Successfully connected to receiver.
• 신호 강도: Indicates wireless signal quality.
• Flash: Recording: 현재 녹화 중임을 나타냅니다.
• Recorded Time: Displays current recording duration.
• A/B Channel is Connected: Indicates connection status for channel A or B.
• A/B Channel Microphone Audio Dynamic Bar: Visual representation of audio input level.
• Transmitter Battery Status: 현재 배터리 잔량을 표시합니다.

Receiver (RX) Screen:

Image: Receiver (RX) screen display details.

• 단핵증: Single channel audio output.
• 스테레오: Dual channel audio output.
• 안전: Outputs dual-channel audio in mono, with one channel at normal audio and the other at -6dB for safety backup.
• Receiver Battery Status: 현재 배터리 잔량을 표시합니다.
• A/B Channel Microphone Audio Dynamic Bar: Visual representation of audio input level for each channel.
• A/B Channel Output Gain Control: Displays current gain setting for each channel (e.g., +6dB).

5. 설정 및 초기 사용

5.1. 기기 페어링

The devices are pre-paired at the factory. If re-pairing is needed:

1. Place the transmitter(s) and receiver within one meter of each other.
2. Turn on both the transmitter(s) and receiver.
3. While the screen is on, long press the Denoise/Pair button on the transmitter(s) and the A/B Channel Output Gain Control/Pair button on the receiver simultaneously to initiate pairing.
4. The pairing icon on the screen will change from 'unpaired' to 'paired' upon successful connection. The first paired transmitter will be assigned to Channel A (left channel), and the second to Channel B (right channel).

Image: Pairing the Transmitter and Receiver.

5.2. 녹음 장치 연결

Analog Output (Camera):

1. Attach the receiver to your camera's hot shoe mount using its belt clip.
2. Connect the receiver to your camera's 3.5mm audio input using the appropriate 3.5mm TRS-TRS audio cable.
3. For real-time audio monitoring, plug headphones into the receiver's 3.5mm TRS/TRRS Monitoring Headphone Port.

Image: Receiver connected to a camera.

Analog Output (Smartphone/Computer):

1. Connect the receiver to your smartphone or computer using the 3.5mm TRS-TRRS audio cable.
2. If your device requires an audio adapter cable (e.g., Lightning to 3.5mm for iPhone, USB-C to 3.5mm for some Android phones/laptops), please purchase it separately.
3. Plug headphones into the receiver's monitoring port for real-time audio monitoring.

Image: Receiver connected to smartphone/computer (analog output).

Digital Output (USB Devices):

1. Connect the receiver to your USB interface device (computer, smartphone with USB-C) using the appropriate audio cable and adapter.
2. The BoomX-D PRO is equipped with a USB C-USB A audio cable (the orange cable of the 3-in-1 charging/output cable). Other audio cables and adapters may need to be purchased separately.
3. Plug headphones into the receiver's monitoring port for real-time audio monitoring.

Image: Receiver connected to USB devices (digital output).

Computer Setup (for Input/Output):

When using with a computer, ensure the 'Comica_BoomX-D_PRO' is selected as both the input and output device in your sound settings.

6. 사용 설명서

6.1. Transmitter (TX) Functions

• 전원 켜기/끄기: Long press the Power/Muting Button.
• 음소거: Short press the Power/Muting Button.
• Denoise Switch: Short press the Denoise/Pair Button.
• External/Internal Mic: Insert a 3.5mm TRS microphone into the External Mic Port to use an external lavalier microphone. The internal microphone will automatically turn off. For better concealment, the belt clip can be fixed outwards.

Image: Using the external lavalier microphone.

Image: Using the internal microphone.

6.2. On-board Recording

The transmitter supports on-board recording with its 8GB internal memory.

• 녹음 시작/중지: Long press the REC Button when the screen is on.
• Copy Recording Files: Connect the transmitter to a computer via the 3-in-1 charging/output cable. The 'BOOMX-D_PRO' disk will appear, allowing you to copy recorded audio files. Ensure the TX is turned on when copying files.

Image: On-board recording and file 이전.

6.3. Receiver (RX) Functions

• 전원 켜기/끄기: Long press the Power/Mono/Stereo/Safety Mode Switch Button.
• Mono/Stereo/Safety Mode Switch: Short press the Power/Mono/Stereo/Safety Mode Switch Button to cycle through modes.
• A/B Channel Output Volume Adjustment: Short press the A/B Channel Output Gain Control/Pair Button to cyclically adjust the output volume for each channel.
• 모니터링: Insert headphones into the 3.5mm TRS/TRRS Monitoring Headphone Port for real-time audio monitoring.

Image: 12-Levels Adjusted Gain Control on Receiver.

Image: Visual Power, Audio Dynamic Monitor.

7. 유지관리

• 부드럽고 마른 천으로 장치를 정기적으로 청소하십시오.
• 극한의 온도, 습도 또는 직사광선에 장치를 노출하지 마십시오.
• Do not attempt to disassemble or repair the device yourself, as this will void the warranty. Contact customer support for assistance.
• When not in use for extended periods, store the device in its carry case in a cool, dry place.
• 장기간 보관할 경우 배터리 수명 유지를 위해 주기적으로 기기를 충전하십시오.

8. 문제 해결 및 FAQ

일반적인 문제 및 해결책:

• Device not turning on or crashing: If there are abnormal phenomena such as a crash or failure to turn on, press and hold the power button for 10 seconds to reset the device.
• No audio dynamic bar on transmitter: This is normal if the transmitter and receiver are not connected.
• STEREO function not working: STEREO function cannot be realized in single-channel and safety mode.
• Recording and copying file동시에: 이 기능은 지원되지 않습니다.
• Sound explosive in recording (high sensitivity cameras): Use the 3.5mm TRS-TRS Audio Output Cable with Impedance (for Sony, Panasonic, Fujifilm, etc.).
• 2.4G wireless interference when using with mobile phone: Turn off Wi-Fi and Bluetooth on your mobile phone to avoid interference.

자주 묻는 질문:

1. How do I connect it to my iPhone?
   For iPhone users, connect a 3.5mm to Lightning adapter with OTG to the receiver. (It is highly recommended to use the CVM-D-MI audio output cable from COMICA.) Note that the iPhone speaker won't work when connected.
2. How do I connect it to my USB-C (Type C) Phone/Laptop?
   For USB-C devices, connect a 3.5mm to USB-C audio adapter with OTG (not included). (It is highly recommended to use the CVM-D-UC II Output Cable or CVM-SPX-UC Cable Adapter from COMICA.) Your phone speaker won't output sound.
3. 충전하면서 사용할 수 있나요?
   It can be used while charging with a power bank. However, it cannot be used while charging with an AC charger, as this may introduce current noise.
4. Why is the sound of the onboard recording lower than the sound output directly to the device?
   The onboard recording is designed to reduce the gain to prevent the sound from being too loud. If the sound is lower, it is easier to increase the volume in post-production. If the sound is too loud, it may not be possible to lower it effectively in post-production.
5. Can I record my audio to the transmitter directly?
   Yes, the transmitter has 8GB internal memory, which can store approximately 24 hours of audio recording. It can be used as a standalone voice recorder.

9. 사양

Image: Detailed specifications for Transmitter and Receiver.

Transmitter (TX) Specifications:

Receiver (RX) Specifications:

10. 사용자 팁

• For optimal audio quality, always use the included wind muff when recording outdoors or in windy conditions.
• When connecting to a smartphone, disable Wi-Fi and Bluetooth to minimize potential 2.4G wireless interference.
• If you experience sound distortion or 'explosive' audio with high-sensitivity cameras (e.g., Sony, Panasonic, Fujifilm), use the specialized 3.5mm TRS-TRS Audio Output Cable with Impedance.
• Remember that the transmitter's mute function only affects the audio output to the receiver, not the internal recording. This allows for a clean backup recording even if the live feed is muted.
• Keep the devices charged using the provided USB-C cables. The 3-in-1 cable allows simultaneous charging and data transfer for the orange cable.

11. 보증 및 지원

보증:

The COMICA BoomX-D PRO comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects. Please do not disassemble the microphone privately, as this will void the warranty.

연락처 정보:

• Web대지: comica-audio.com
• 이메일: support@comica-audio.com
• 페이스북: 코미카 오디오 테크 글로벌
• 보험tag숫양 : 코미카 오디오
• 유튜브: 코미카 오디오

For further assistance, please refer to the full user manual available in PDF format. You can find a link to the PDF manual on the product's official website or by searching for 'COMICA BoomX-D PRO User Manual PDF'.