1. 서론
Thank you for choosing the AUTOPHIX JSC 2100 Super Capacitor Jump Starter. This device is designed to provide a safe, portable, and reliable solution for starting 12V vehicles with a weak battery. Please read this user manual carefully before using the device to ensure proper operation and safety.
안전 경고
Failure to follow these safety warnings may result in property damage, electric shock, or serious injury.
- Do not let the battery clamps touch each other or other metals to avoid sparking.
- Do not disassemble the product and accessories. Incorrect assembly may cause sparks or electric shock.
- Do not use the device if it is already broken or damaged.
- Do not place the device near combustible materials such as carpets, cardboard, or paper.
- 기기를 비나 눈에 노출시키지 마세요.
- Do not place the device on the car battery when starting the car.
- Please turn off all electrical appliances in the car before using the device, such as headlights and air conditioner.
- Ensure the car is fully stopped and the emergency brake is engaged before use.
- Make sure the vehicle's ignition key is turned off before using the device (or ensure the car is completely off when using a Smart Car Key Button).
- Please keep the device away from heat sources and avoid direct sunlight.
- Do not clean the device with corrosive liquids.
- Please charge the device fully before initial use.
2. 제품 특징 및 장점tages
The AUTOPHIX JSC 2100 stands out with its advanced supercapacitor technology, offering superior safety and convenience compared to traditional lithium-ion jump starters.
슈퍼커패시터 기술
Unlike lithium-ion jump starters that require regular pre-charging, the JSC 2100 utilizes supercapacitors. It absorbs a small amount of residual power from your weak car battery and rapidly amplifies it to generate the necessary power to start the engine within minutes. This means you don't need to remember to pre-charge the device at home.
Figure 1: Ultracapacitor advantages over traditional lithium charging equipment.
- 유지 보수 없음: Safe and worry-free operation.
- 빠른 충전: Quick start in emergencies.
- 초고용량: Stable power storage.
- Physical Discharge: 환경 친화적.
- 더 긴 수명: Up to 10 years, withstanding over 100,000 charge/discharge cycles.
기본 제공 보호
Figure 2: Integrated protection features for safe operation.
- 과충전 보호
- 단락 보호
- 과방전 보호
- 온도 보호
- 역방향 연결 방지 보호
Extreme Weather Reliability
The JSC 2100 is designed to operate reliably in a wide range of temperatures, from extremely cold conditions (-25°C / -13°F) to high heat (70°C / 158°F). This makes it ideal for use in diverse climates and environments.
Figure 3: The JSC 2100 operates effectively in extreme temperatures.
광범위한 차량 호환성
The JSC 2100 supports 12V batteries and can jump start gasoline engines up to 5.0 liters and diesel engines up to 5.0 liters. It is suitable for a variety of vehicles including motorcycles, SUVs, sedans, commercial vehicles, pickup trucks, and vans.
Figure 4: The JSC 2100 supports a wide range of 12V vehicles.
3. 패키지 내용
다음 항목에 대한 상자를 체크해 주세요.
- AUTOPHIX JSC 2100 Jump Starter (x1)
- Cigarette Lighter (x1)
- 악어 Clamps (x1 set)
- USB 충전 케이블(x1)
- 사용 설명서(x1)
그림 5: 제품 패키지에 포함된 내용.
4. 제품 오버view
Familiarize yourself with the components of your AUTOPHIX JSC 2100 Jump Starter:
Figure 6: Labeled components of the JSC 2100 Jump Starter.
- LCD 디스플레이: Shows battery input, charge status, and instructions.
- 시작 버튼: Initiates the jump-starting process.
- EC8 포트: Connector for the alligator clip cable.
- USB 충전 포트 : For charging the device via a 5V Type-C USB cable.
- DC 충전 포트: For charging the device via a 12V alligator clip cable or cigarette lighter adapter.
- Clamps: Red (+) and Black (-) alligator clips for connecting to the vehicle battery.
5. 설정 및 충전
The JSC 2100 does not require constant pre-charging like traditional lithium-ion jump starters. It charges itself from the vehicle's weak battery or other 12V/5V sources.
충전 방법
The device can be charged using one of two methods:
- From Vehicle Battery (12V): Connect the alligator clip cable to the EC8 port on the jump starter, then connect the clamps to your vehicle's battery terminals (red to positive, black to negative). The device will draw a small charge from the battery to power itself up for a jump start. This typically takes about 5 minutes.
- From 5V USB Source: Use the provided Type-C USB cable to connect the jump starter to a 5V USB power source. This method is slower and typically takes about 30 minutes for a full charge.
Figure 7: Approximate charging times based on input voltage.
6. 작동 지침: 차량 점프 스타트 방법
Follow these steps to safely jump start your 12V vehicle:
그림 8: 차량 점프 스타트를 위한 단계별 가이드.
- 점프 스타터에 연결하세요: Fully insert the plug of the battery cable (alligator clips) into the EC8 port on the jump starter.
- 차량 배터리에 연결하세요: 완전히 닫힘amp the positive (+) pole of the car battery with the red alligator clip and the negative (-) pole of the car battery with the black clip. Ensure a secure connection.
- Initiate Jump Start: Press the 'Start' button on the jump starter. The device's screen will display instructions. Turn off all electrical appliances in the car (e.g., headlights, radio) and then press the 'Next' button on the jump starter. After a few seconds, the screen will prompt you to "please start the ignition".
- 차량 시작: At this time, turn the vehicle's ignition key to the START position (or press the Smart Car Key Button). The jump starter's screen will show "Starting" and then "Finish" once successful.
- 연결 해제: Disconnect the alligator clip cable and remove the alligator clips from the vehicle battery within 30 seconds after the vehicle has started.
Figure 9: Visual flowchart of the jump-starting process.
7. 유지관리
The AUTOPHIX JSC 2100 Super Capacitor Jump Starter is designed for low maintenance due to its supercapacitor technology.
- 청소: Use a soft, dry cloth to clean the device. Do not use corrosive liquids or abrasive cleaners.
- 저장: Store the device in a cool, dry place, away from direct sunlight and heat sources. Ensure the clamps are not touching each other or other metal objects during storage.
- 수명: With proper care, the supercapacitor technology provides a lifespan of up to 10 years and over 100,000 uses.
8. 문제 해결
If you encounter issues with your JSC 2100, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Device does not turn on or display anything. | Device is completely discharged or damaged. | Ensure the device is connected to a power source (vehicle battery or 5V USB) for charging. If still unresponsive, the device may be faulty. |
| Vehicle does not start after following instructions. | Insufficient charge in the jump starter; vehicle battery too weak; poor clamp connection; vehicle issue unrelated to battery. | CL을 확인amps are securely connected. Allow more time for the jump starter to charge from the vehicle battery. Check if vehicle has other mechanical issues. |
| "Please start the ignition" message does not appear. | Electrical appliances in the car are still on; 'Next' button not pressed. | Turn off all vehicle electrical appliances. Ensure you press the 'Next' button on the jump starter after connecting. |
| Clamps spark when connecting. | Incorrect connection order; clamps touching each other. | CL을 확인amps are connected correctly (red to positive, black to negative) and do not touch each other or other metal parts. |
문제가 지속되면 고객 지원팀에 문의하세요.
9. 사양
Technical parameters for the AUTOPHIX JSC 2100:
그림 10: 자세한 제품 사양.
| 매개변수 | 값 |
|---|---|
| 모델 | JSC 2100 |
| 표시하다 | Back-lit, 128*64pixel display |
| 슈퍼 커패시터 | 120F |
| 시작 전류 | >600A |
| 피크 전류 | 1000A |
| 충전 방법 | 12V alligator clip cable or 5V type-C USB cable |
| 작동 온도 | -25°C~70°C (-13~158°F) |
| 차원 | 262*123*57.50mm |
| 기능 | 차량 시작 |
10. 사용자 팁
Here are some general tips for optimal use of your jump starter:
- 접근성을 유지하세요: Store the jump starter in an easily accessible location in your vehicle, especially during long trips or in cold weather.
- 정기 점검: Although it doesn't require constant charging, periodically check the device's condition and ensure cables are not damaged.
- 깨끗한 터미널: For best results, ensure your vehicle's battery terminals are clean and free of corrosion before connecting the clamps.
- 엔진 크기: Be mindful of the specified engine displacement limits (5.0L Gas, 5.0L Diesel) to avoid overworking the device.
11. 보증 및 지원
For warranty information, technical support, or any questions not covered in this manual, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
