XTOOL Anyscan A30D BT OBD2 Scanner Instruction Manual

1. 서론

The XTOOL Anyscan A30D V2.0 is a powerful Bluetooth-enabled OBD2 diagnostic scanner designed for comprehensive vehicle analysis. It inherits the robust features of previous A30 models and introduces new capabilities like CAN FD and FCA protocol support, along with a built-in battery voltage display and flashlight function. This tool provides lifetime free software updates, ensuring you always have access to the latest diagnostic developments and vehicle coverage.

주요 특징은 다음과 같습니다.

• 평생 무료 소프트웨어 업데이트: No subscription fees for all functions.
• 전체 시스템 진단: Accesses all available system modules (Engine, ABS, SRS, Transmission, etc.).
• Bi-directional Control & Active Tests: Perform various active tests to check component integrity.
• 19+ Hot Service Resets: Solve common maintenance tasks.
• Full 10 Mode OBD2 Functions: Comprehensive engine diagnostics.
• CAN FD & FCA AutoAuth Support: Broader compatibility for newer vehicles.
• 8가지 기능을 하나로 통합한 실시간 데이터 그래프: Detailed real-time data analysis.
• 배터리 용량tage Display & Flashlight: Added convenience for users.
• 다국어 지원: 22개 이상의 언어를 지원합니다.

2. 설정 가이드

Follow these steps to set up your XTOOL Anyscan A30D V2.0 scanner:

2.1. 앱 다운로드 및 설치

• iOS 기기의 경우: Download the "Anyscan" App from the Apple App Store.
• Android 기기의 경우: Download the "Anyscan" App from Google Play or the official XTOOL website (Support -> Download APP -> Anyscan).

2.2. 등록 및 활성화

Locate the Serial Number (S/N) and activation code on the quality certificate included with your device. Open the Anyscan app and follow the prompts to register your account and activate the dongle.

2.3. 차량 연결하기

1. Plug the A30D V2.0 interface adapter into your vehicle's OBD2 Port. The device will light up (red light for power supply). The built-in flashlight can assist in locating the port in dark areas.
2. 차량의 시동을 켜세요.

2.4. 블루투스 페어링

• iOS 기기의 경우: Go to both the Anyscan app's Bluetooth settings and your device's system Bluetooth settings to pair with the A30D V2.0.
• Android 기기의 경우: Only use the Bluetooth settings within the Anyscan app to pair with the A30D V2.0.

Once connected, the device's indicator lights will change (e.g., blue for Bluetooth, green for communication).

3. 사용 설명서

After successful setup and connection, you can begin diagnosing your vehicle using the Anyscan app.

3.1. 전체 시스템 진단

The A30D V2.0 can access and diagnose all available electronic control units (ECUs) in your vehicle. This includes, but is not limited to, Engine, ABS, SRS (Airbag), Transmission, TPMS (Tire Pressure Monitoring System), SAS (Steering Angle Sensor), BMS (Battery Management System), EPB (Electronic Parking Brake), Chassis, and Air Conditioning systems.

• Check Engine System: Reads fault codes, identifies the cause of the check engine light, and displays live data streams.
• ABS 시스템: Retrieves DTCs, views live data, and offers you specific info of pending codes.
• SRS System: Reads SRS information to detect problems and ensure driving safety.
• 전송 시스템: This car Bluetooth diagnostic tool reads diagnostic codes from the transmission system and detects whether the car’s speed and load match its transmission’s power output.

Within each system, you can typically perform the following actions:

• 오류 코드 읽기: Displays detailed DTC information.
• Erase Trouble Codes: Clears DTCs and other data from the ECU, turning off warning lights.
• ECU 정보: Provides detailed information about the ECU.
• 라이브 데이터 : Retrieves and displays real-time data and parameters from the vehicle's ECU.

3.2. Bi-directional Control & Active Tests

This function allows you to send commands to vehicle systems and components to test their operational status directly from the scanner, without using the vehicle's controls. This significantly speeds up troubleshooting and helps identify malfunction causes efficiently.

Examp활성 테스트에는 다음이 포함됩니다.

• 라디에이터 팬을 켜다
• 스로틀 조절
• 창문 열기/닫기
• 수술용 거울
• Turning on/off lights or the sound horn
• 도어록 테스트
• EVAP system tests
• ABS auto-bleed
• 에어컨 구성
• 적응형 헤드amp 조정
• Mirrors Folding/Unfolding
• Interior lights / Inside mirrors / Steering wheel heating

3.3. Special Functions (19+ Hot Service Resets)

The A30D V2.0 offers over 19 special reset and maintenance functions to address common vehicle service needs. These functions are continuously updated and expanded.

• 오일 리셋: Resets service intervals after an oil change and turns off the oil light.
• EPB 재설정: Resets brake pads after replacement of the brake system.
• SAS 재설정: 조향각 센서의 보정을 수행합니다.
• BMS 재설정: Registers a new battery to the ECU after replacement.
• ABS 출혈: Cycles the ABS pump to bleed air out of the ABS module for firm brake pedals.
• 인젝터 코딩: Codes injectors after replacement.
• 스로틀 재학습: Initializes throttle actuators to return "learned" values to the default state.
• Crank Sensor Relearn (Tooth Learning): Learns crankshaft tooth machining tolerance for accurate engine misfire diagnosis.
• DPF/GPF Reset Service: Regenerates Diesel/Gasoline Particulate Filters to clear PM and stabilize performance.
• TPMS 재설정: Relearns TPMS sensors so new sensors are recognized by the ECU.
• Gearbox Match (Transmission/Gearbox Matching): Resets adaptive shifting points in the automatic Transmission Control Unit.
• 에어백 수리: Resets Airbag data and clears collision data after replacement.
• Tire Upgrade (Tire Pressure Reset): Resets tire pressure and turns off the tire pressure MIL after tire-related changes.
• 좌석 교정: 교체 또는 수리 후 메모리 기능이 있는 시트와 호환됩니다.
• ECU Control Unit Reset: Restores ECU parameters to factory default settings.
• Window Initialization: Performs door window matching to recover ECU initial memory and automatic ascending/descending function.
• 선루프 초기화: Similar to window initialization for sunroofs.
• GPF Reset: (Gasoline Particulate Filter) Similar to DPF reset.
• Camshaft Learning: Helps remove the engine or timing belt after replacing the ckp sensor or ECU.

3.4. 10가지 모드의 OBD2 기능 완비

The A30D V2.0 provides comprehensive OBD2 functionality for all cars manufactured after 1996.

1. 라이브 데이터 스트림 읽기: Reads and displays live ECU/PCM data stream, plotting functions graphically.
2. 정지 화면 데이터 읽기: Records specific vehicle conditions when an emission-related fault occurs.
3. Read DTCs (Diagnostic Trouble Codes): Shows detailed descriptions of DTCs.
4. DTC 지우기: 엔진 경고등(MIL)을 끄고, 오류 코드를 삭제하고, 모니터를 재설정합니다.
5. Oxygen Sensor Monitoring: 검색을 허용합니다 viewO2 센서 모니터 테스트 결과.
6. 시스템 모니터링: Checks whether various emissions-related systems are operating properly.
7. Read Pending DTCs: Displays diagnostic trouble codes that have not yet confirmed a malfunction.
8. Control Operation of On-Board System (Component Test): Actuates certain vehicle components by commands from the scanner to test their operability.
9. 차량 정보 읽기: VIN(차량 식별 번호), CID(보정 ID), CVN(보정 확인 번호)을 표시합니다.
10. DTC 조회 라이브러리: Provides direct definitions of OBD2 fault codes, including descriptions, causes, and maintenance suggestions.

3.5. 실시간 데이터 그래프

The A30D V2.0 allows you to read and display vehicle live data in an 8-in-1 graphical format. You can customize specific PIDs (Parameter IDs) and merge graphs for up to 8 data PIDs simultaneously, providing a comprehensive view of your car's health status and aiding in the analysis of abnormal parameters.

3.6. FCA AutoAuth & CAN FD Protocols

The A30D V2.0 supports FCA AutoAuth for main FCA vehicles (Fiat, Chrysler, Dodge, Jeep, etc.) manufactured after 2018. This allows the scanner to communicate with the FCA Authentication System, bypassing the need for a bypass cable for diagnostics and bi-directional controls. Note that a personal AutoAuth account and active subscription may be required for full access to FCA's Secure Gateway Module.

It also features built-in CAN FD protocol support, making it compatible with the latest GM vehicles manufactured after 2020. CAN FD offers advantages such as shorter latency, more accuracy, better real-time performance, and higher bandwidth for efficient information transmission.

3.7. 보고서 생성

The Anyscan A30D V2.0 automatically generates diagnostic reports after completing a car diagnostic session. These reports can be saved, shared via email, or printed as PDF files, providing a clear record of vehicle conditions and diagnostic findings.

4. 유지관리

4.1. 소프트웨어 업데이트

The XTOOL Anyscan A30D V2.0 comes with lifetime free software updates. These updates are released frequently to improve capabilities, expand vehicle coverage, and optimize the app/software. To update, access the "Updates" menu in the Anyscan app and select "Update All" to download the latest software versions.

4.2. 일반 관리

• 기기를 깨끗하게 유지하고 먼지와 습기가 없도록 하세요.
• 사용하지 않을 때는 장치를 서늘하고 건조한 곳에 보관하십시오.
• 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
• 제품을 직접 분해하거나 수리하려고 시도하지 마십시오. 그렇게 할 경우 보증이 무효화될 수 있습니다.

5. 문제 해결

흔히 발생할 수 있는 문제에 대한 해결책은 다음과 같습니다.

5.1. "VCI Connect Failed", "License Expired", or "Software Package Updated, but Update Interface Not Available"

These issues often indicate that the VCI (Vehicle Communication Interface) firmware version is too low. XTOOL technicians frequently optimize the firmware. If your firmware is not updated, it may cause communication problems.

해결책: Upgrade the firmware version according to the video operation in the setup section. If the issue persists, please contact XTOOL support for assistance.

5.2. Automatic Scan Unsuccessful

If the automatic VIN scan fails to identify your vehicle, you may need to manually enter the vehicle information. If manual entry also faces issues, please contact XTOOL support with your 17-digit VIN number for technical assistance.

5.3. Missing Activation Code

If your activation code is missing, please send your device's Serial Number (S/N) to XTOOL support (xtooldirect@outlook.com) to retrieve it.

5.4. Language Switching Issues

When switching the language in the app, the factory presets the language and model software in English. After changing the language, you will need to re-download the model software in the corresponding new language. If the software prompts that a language is not supported, contact XTOOL support for authorization.

6. 사양

7. 사용자 팁

• 언어 변경: Remember that after switching the app language, you need to re-download the specific vehicle model software in the newly selected language for it to function correctly.
• 호환성 검사 : Vehicle compatibility for specific functions can vary. If you are unsure, it is recommended to provide your vehicle's VIN (Vehicle Identification Number) to XTOOL support (xtooldirect@outlook.com) to check compatibility before attempting advanced operations.
• FCA 자동 인증: While the A30D V2.0 supports FCA AutoAuth, full access to the Secure Gateway Module for 2018+ FCA vehicles may require a separate personal AutoAuth account and active subscription.
• 소프트웨어 업데이트: 이점을 활용하세요tage of the lifetime free software updates to ensure your tool always has the latest vehicle coverage and diagnostic capabilities. Regularly check the "Updates" section in the app.

8. 보증

The XTOOL Anyscan A30D V2.0 diagnostic tool comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9. 지원

For technical assistance, compatibility inquiries, or any other support needs, please contact XTOOL's customer service:

• 이메일: xtooldirect@outlook.com
• 서비스 시간: 24 hours after-sales service is available.

When contacting support, please provide your device's Serial Number (S/N) and the operating system of your smart device (iOS/Android) for faster service.