1. 제품 오버view
The ANENG VD802 is a pen-style non-contact AC voltage detector (NCV) designed for safe and efficient electrical testing. It provides a reliable method to detect AC voltage in circuits, outlets, and wires without direct contact, enhancing safety for users. Its features include intelligent zero/firewire recognition, breakpoint detection, adjustable sensitivity, and an integrated LED flashlight for use in low-light conditions.
2. 패키지 내용
다음 품목이 패키지에 포함되어 있는지 확인하세요.
- 1 x ANENG VD802 AC Voltag전자 테스터
- 1 x 사용자 설명서
3. 설정 및 배터리 설치
The ANENG VD802 requires 2 x 1.5V AAA batteries (not included) for operation.
- Locate the battery compartment cover, usually at the rear or bottom of the device.
- 배터리 칸을 엽니다.
- 1.5V AAA 배터리 2개를 삽입할 때, 극성(+/-)을 올바르게 맞춰주세요.
- 배터리 덮개를 단단히 닫으세요.
Warning: Ensure the device is off before installing or replacing batteries. Do not mix old and new batteries, or different types of batteries.
4. 사용 설명서
4.1 전원 켜기/끄기
- Press the power button (usually marked with a power symbol) to turn the device on.
- The device will automatically shut down after 5 minutes of inactivity or if no AC voltag배터리 수명 절약을 위해 e가 감지됩니다.
4.2 비접촉 AC 전압tage 감지
The VD802 detects AC voltage in the range of 12V to 1000V AC (50/60Hz).
- 장치를 켭니다.
- Bring the non-contact tip of the tester close to the wire, outlet, or circuit you wish to test.
- AC voltage is detected, the tester will emit an audible alarm (beeping sound) and the LED indicator will flash. The frequency of the beeping and flashing may increase with stronger voltag전자 신호.
4.3 감도 조정
The device features adjustable sensitivity for different testing scenarios.
- 'S' 버튼을 눌러 고감도, 중감도, 저감도 모드를 순환하며 선택할 수 있습니다.
- Adjust sensitivity as needed to avoid false positives or to detect voltage in less accessible areas.
4.4 제로/파이어와이어 인식
The VD802 can intelligently distinguish between live (fire) and neutral (zero) wires.
- When testing an outlet or wire, the device will indicate a live wire with a fast flashing red light and a rapid hum.
- For a neutral wire, the indicator will not be bright or will show a different, less intense signal.
4.5 라인 중단점 감지
This feature helps locate breaks in live wires.
- Move the tester along the length of a live wire.
- The device will indicate the presence of electricity with a red light flashing and a hum.
- When the tester passes a breakpoint, the alarm will stop or significantly change, indicating the interruption in the circuit.
4.6 Zero Wire Insulation Testing
The VD802 can assist in safely determining the quality of zero wire insulation.
4.7 손전등 기능
The integrated LED flashlight can be activated for use in dark environments.
- Press the flashlight button (usually marked with a light bulb symbol) to turn the flashlight on or off.
5. 유지관리 및 관리
- 청소: 부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
- 저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 배터리 교체: If the device does not power on or the indicators are dim, replace the AAA batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
- 투명 커버: The device features a high-strength transparent cover designed to be scratch-resistant, not easy to break, and wear-resisting.
6. 문제 해결
- 장치가 켜지지 않음: 배터리가 올바르게 장착되었고 충전량이 충분한지 확인하세요. 필요한 경우 배터리를 교체하세요.
- 측정값이 일관되지 않음: Ensure the tip is close enough to the conductor. Adjust sensitivity using the 'S' button. Ensure there are no strong electromagnetic fields nearby that could interfere with readings.
- No alarm when voltage가 존재합니다: Verify the device is powered on and batteries are good. Ensure the NCV tip is making proper proximity contact.
7. 사양
| 특징 | 사양 |
|---|---|
| 모델 | VD802 (also referred to as AC10) |
| AC 볼륨tag및 범위 | 12V ~ 1000V AC (50/60Hz) |
| 디스플레이 유형 | 디지털 전용 |
| 작동 온도 | 0℃ ~ 40℃ |
| 전원 공급 장치 | 2 x 1.5V AAA 배터리(포함되지 않음) |
| 알람 모드 | 소리와 빛 |
| 플래시 | 예 |
| NCV 감도 | High, Medium, Low (Adjustable) |
| 자동 종료 | After 5 minutes of no operation/no voltag전자 감지 |
| 재료 | ABS |
| 치수 | 약 157.3mm x 24mm(6.18인치 x 0.95인치) |
| 무게 | 약 43g |
| 정확도 등급 | 3학년 |
8. 사용자 팁
- Always test the detector on a known live circuit before use to ensure it is functioning correctly.
- When detecting breakpoints, move the tester slowly along the wire to pinpoint the exact location of the break.
- Utilize the flashlight in dimly lit areas to improve visibility and safety during testing.
- Adjusting the sensitivity can help in crowded electrical panels to isolate the specific wire you are testing.
9. 보증 및 지원
For any issues, questions, or support regarding your ANENG VD802 Non-contact AC Voltage Detector, please contact the seller or manufacturer directly. Keep your purchase receipt for any warranty claims.
