1. 서론
The MPG Pendant Handwheel Controller is a high-quality, durable, and easy-to-operate device designed for precise manual control of CNC machines. It allows users to manually control the X, Y, and Z axes of compatible routers, enhancing operational flexibility and precision during machining tasks.
2. 주요 특징
- 고품질 건설: The handwheel is made of metal, ensuring durability and a premium feel.
- 정확한 제어: Features a 100PPR (Pulses Per Revolution) encoder for accurate movement.
- XYZ-Axis Control: Manually control the X, Y, and Z axes of compatible CNC routers.
- 플러그 앤 플레이: No additional drivers are needed for operation; simply connect to the controller board.
- 조정 가능한 속도 : Offers three running speed gears: 1X (low speed), 10X (medium speed), and 100X (high speed).
- Manual Speed Adjustment: Running speed can also be controlled by adjusting the handwheel turning speed.
- 출력 회로 : Collector open circuit, complementary output, long line.
3. 사양
| 기인하다 | 값 |
|---|---|
| 입력 Voltage | 5V |
| 무게 | 700g |
| 크기(대략) | 135 x 69.5mm(5.31 x 2.74인치) |
| 해결 | 25, 100 PPR |
| 설치 | Adsorption magnet or hook |
| 응용 산업 | 공작기계 |
| 모델 번호 | 910741153 |
| 기원 | 중국 본토 |
4. 패키지 내용
패키지에는 다음이 포함됩니다.
- 1 x MPG Pendant Handwheel Controller
5. 설정 지침
- 연결 포트를 확인하십시오. Locate the appropriate DB15 connector port on your CNC machine's controller board. This controller is specifically designed for Genmitsu 3018-PROVer and 3018-MX3 routers.
- Connect the Handwheel: Plug the DB15 connector of the MPG Pendant Handwheel Controller into the identified port on your CNC machine. Ensure a secure connection.
The controller is plug-and-play, meaning no additional software drivers are required for its basic functionality once connected to a compatible CNC machine.
6. 사용 설명서
The MPG Pendant Handwheel Controller provides intuitive manual control over your CNC machine's axes and movement speed.
6.1 Axis Selection
Use the left rotary knob to select the desired axis for operation:
- OFF : Disables MPG control.
- X: Selects the X-axis for movement.
- Y: Selects the Y-axis for movement.
- Z: Selects the Z-axis for movement.
- 4, 5, 6 : These options are typically invalid or reserved for advanced multi-axis systems not supported by standard 3-axis CNC routers like the Genmitsu 3018 series.
6.2단 속도 선택
Use the right rotary knob to select the desired movement speed multiplier:
- X1 : Low speed movement.
- X10 : Medium speed movement.
- X100 : High speed movement.
6.3 Manual Handwheel Control
Once an axis and speed are selected, rotate the large silver handwheel to move the selected axis. The speed of the axis movement will correspond to the selected speed multiplier and the rate at which you turn the handwheel.
7. 사용자 팁
- 호환성 검사 : While designed for Genmitsu 3018-PROVer and 3018-MX3, compatibility with other CNC models (e.g., Genmitsu 4040pro) is not explicitly guaranteed. Always verify the connector type and pinout requirements of your specific CNC machine before purchasing 또는 연결.
- 안전한 장착: Utilize the adsorption magnet or hook feature to securely mount the handwheel controller near your workspace for convenient access and to prevent accidental drops.
- Gradual Speed Adjustment: When making fine adjustments, start with the X1 (low speed) setting and gradually increase to X10 or X100 as needed for faster movements.
8. 문제 해결
- 컨트롤러가 응답하지 않음:
- Ensure the DB15 connector is fully and securely plugged into the CNC control board.
- Verify that the CNC machine is powered on and functioning correctly.
- Check the axis selection knob on the handwheel controller to ensure an axis (X, Y, or Z) is selected, not 'OFF' or an invalid axis.
- Incorrect Movement Speed:
- Adjust the speed selection knob (X1, X10, X100) to match your desired movement increment.
- The actual movement speed is also dependent on how quickly you rotate the handwheel.
- 간헐적인 연결:
- 케이블에 눈에 보이는 손상이나 꼬임이 있는지 검사하세요.
- Ensure the connector screws (if present) are tightened to prevent accidental disconnection.
9. 유지관리
- 청소: Use a soft, dry cloth to wipe down the controller. Avoid using harsh chemicals or abrasive cleaners, which can damage the surface or internal components.
- 저장: When not in use, store the handwheel controller in a clean, dry environment away from direct sunlight, extreme temperatures, and excessive dust.
- 케이블 관리: 내부 전선 손상을 방지하기 위해 코일 케이블을 급격하게 구부리거나 과도하게 당기지 마십시오.
10. 보증 및 지원
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference.
