1. 서론
Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.
Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.
Common scenarios where the YABER Jump Starter is essential.
2. 중요한 안전 경고
본 제품을 사용하기 전에 모든 안전 정보를 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.
스마트 씨엘amps Protection Features:
The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:
- 고온 보호: 작동 중 과열을 방지합니다.
- 역접속 보호: 충돌 시 경고를 보내고 손상을 방지합니다.amps가 잘못 연결되었습니다.
- 과전류 보호: 과도한 전류 흐름을 방지합니다.
- 역충전 보호: Prevents current from flowing back into the jump starter from the vehicle battery.
- 역 극성 보호 : Ensures correct polarity connection.
- 과방전 보호: 내부 배터리의 과방전을 방지합니다.
- 과충전 방지 : Prevents overcharging of the internal battery.
- 단락 보호: 단락이 발생하면 자동으로 꺼집니다.
스마트 클amps provide multiple layers of safety.
Visual representation of the smart clamp 보호 기능.
일반 안전 예방 조치:
- 제품을 물에 담그지 마십시오.
- 인화성 액체, 가스 또는 먼지가 있는 곳과 같은 폭발성 대기에서 제품을 작동하지 마십시오.
- 제품을 개조하거나 분해하지 마세요.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 제공된 스마트 클립만 사용하십시오.amp케이블과 전선.
3. 패키지 내용
다음 품목이 패키지에 포함되어 있는지 확인하세요.
- Car Jump Starter (YA40) x 1
- Protective Smart Clamps (Red = positive; Black = negative) x 1
- Type-C USB 케이블 x 1
- Inflator Hose x 1 (if applicable to your model variant)
- 사용 설명서 x 1
- 보관함 x 1
The YABER Jump Starter and its included accessories.
4. 제품 특징
The YABER Car Jump Starter is a versatile device offering multiple functionalities:
- 강력한 점프 스타터: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
- 고용량 보조 배터리: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
- 12V/10A DC 출력: Provides power for various 12V accessories.
- LED 비상 조명: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
- 극한 온도 작동: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
- 스마트 씨엘amps: Equipped with multiple safety protections as detailed in the Safety Warnings section.
위에view of the YABER Jump Starter's multi-functional capabilities.
5. 사양
| 특징 | 사양 |
|---|---|
| 모델 | YA40 |
| 피크 전류 | 4000A |
| 배터리 용량 | 26800mAh |
| Car Boot Voltage | 12V |
| USB 출력 1 | 5V / 2.4A (MAX 5V3.1A) |
| USB 출력 2 | 5V / 2.4A (MAX 5V3.1A), 9V / 2A (Fast Charge) |
| USB-C 입력 | 5V / 2A, 9V / 2A |
| DC 출력 | 12V / 10A |
| 손전등 모드 | Illumination, SOS, Strobe |
| 작동 온도 | -20℃ ~ +60℃ (-4°F ~ 140°F) |
| 라이프 사이클 | 1000회 이상 |
| 제품 크기 | 8.8 x 5 x 18cm |
| 제품 무게 | 600g(대략) |
| 인증 | ROHS, FCC, CE |
The jump starter is designed for reliable performance in a wide range of temperatures.
6. 설정 및 초기 충전
Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.
- Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
- Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
- The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.
The device supports two-way fast charging, allowing for quick recharging of the unit itself.
7. 사용 설명서
7.1. 차량 점프 스타트
차량 점프 스타트를 시도하기 전에 점프 스타터가 최소 50% 충전되어 있는지 확인하세요.
- 끼워 넣다: 스마트 CL 플러그amp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
- 연결하다: 빨간색 (+) cl을 부착하세요amp 차량 배터리의 양극 단자와 검은색 (-) 단자에 연결하세요.amp 음극 단자에. 스마트 클amps will indicate if the connection is correct.
- 시작: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
- 제거하다: Once the car starts, immediately remove the smart clamps from the car battery, then unplug the smart clamp 점프 스타터에서 나온 케이블.
Visual guide for the jump starting process.
The YABER Jump Starter is suitable for a wide range of 12V vehicles.
7.2. 보조배터리로 사용하기
The jump starter can charge your electronic devices via its USB output ports.
- Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
- 점프 스타터가 자동으로 기기 충전을 시작합니다.
- 디지털 디스플레이에는 남은 배터리 잔량이 표시됩니다.tage.
Charging multiple devices simultaneously with the power bank function.
7.3. LED 비상등 사용
The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.
- Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
- Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
- Press and hold the power button again for 3 seconds to turn off the light.
The LED light provides versatile illumination for various situations.
상세한 view of the LED emergency light modes.
8. 유지 관리 및 보관
- 충전 중: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
- 청소: 마른 부드러운 천으로 기기를 닦으십시오. 강한 화학 약품이나 연마제를 사용하지 마십시오.
- 저장: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
- 온도: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).
9. 문제 해결
기기가 켜지지 않음:
- 기기가 충전되어 있는지 확인하세요. Type-C 케이블을 사용하여 전원에 연결하세요.
Vehicle will not jump start:
- 스마트클을 확인하세요amp cable is fully inserted into the jump starter.
- Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
- Verify that the jump starter has sufficient charge (at least 50%).
- If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
- 스마트클이라면amps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.
보조 배터리로 충전이 안 되는 기기:
- 점프 스타터에 충분한 전력이 충전되어 있는지 확인하십시오.
- Check that the USB cable is securely connected to both the jump starter and your device.
- 다른 USB 케이블이나 포트를 사용해 보세요.
10. 사용자 팁
- Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
- Familiarize yourself with the smart clamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
- 점프 스타트를 할 때는 차량의 시동이 꺼져 있는지 확인한 후 점프 스타터 케이블을 연결하십시오.amps.
- After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.
11. 보증 및 지원
YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official web사이트 또는 구매처.
보증 청구를 위해 구매 증명서를 보관하십시오.
12. 자주 묻는 질문(FAQ)
- Q: What power does the device charge? Is it 110V or 220V?
- A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.
- Q: Is the product new and does it come with a warranty?
- A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.
