SMG-012 Berner 868MHz Remote Control Instruction Manual

소개

This manual provides detailed instructions for the setup, programming, and use of your Scimagic-RC SMG-012 868MHz remote control. This device is designed for self-copying functionality, allowing you to duplicate existing remote controls for various applications such as electric telescopic doors, road gates, and alarm systems.

For additional guidance, a user manual in PDF format is available: View 사용 설명서 (PDF).

명세서

The remote control comes with a pre-installed battery, a keychain, and an English manual.

Figure: Dimensions of the SMG-012 remote control.

호환성

The SMG-012 remote control is 100% compatible with the following 868MHz remote control models. Please ensure your original remote's frequency and button color (for Hormann) match the requirements below.

Hormann 868MHz Models:

• HSM2 868, HSM4 868
• HS1 868, HS2 868, HS4 868
• HSE2 868, HSE4 868
• HSZ1 868, HSZ2 868
• HSP4 868, HSP4-c 868
• HSD2-A 868, HSD2-c 868

Important Note for Hormann: This remote is only compatible with Hormann 868MHz remotes that have BLUE buttons. It is NOT compatible with BS BiSecur versions.

Figure: Hormann remote compatibility details.

Figure: SMG-012 compatibility with Hormann 868MHz remotes.

Marantec 868MHz Models:

• Digital D382 868, Digital D384 868
• Digital D302 868, Digital D304 868
• Digital D313 868
• Digital D321 868, Digital D323 868
• Command 131 868

Important Note for Marantec: This remote is only compatible with Marantec 868MHz remotes. It is NOT compatible with 433MHz versions. 868MHz models typically have a two-tone color shell (back darker than front), while 433MHz models have a single-color shell.

Figure: Marantec remote frequency identification.

Figure: SMG-012 compatibility with Marantec 868MHz remotes.

Berner 868MHz Models:

• BHS110, BHS121, BHS130, BHS140, BHS153
• BHS211, BHS221

Figure: SMG-012 compatibility with Berner 868MHz remotes.

Figure: SMG-012 replacing Berner BHS211 and BHS221.

설정 및 프로그래밍

Follow these steps to program your new SMG-012 remote control by copying the code from your original transmitter.

1단계: 복제기에서 기록 코드를 삭제합니다.

1. Press and hold both the LOCK (Button A) and UNLOCK (Button B) buttons simultaneously until the LED flashes 3 times.
2. Release Button B (while continuing to press Button A).
3. Press Button B slowly for 3 times. The LED will flash rapidly.
4. Release Button A. The code clearance is now complete. The remote is ready for programming.

This process ensures any previous programming on the duplicator is erased.

Step 2: Copy Code from Original Transmitter

1. Place the SMG-012 duplicator and your original remote control as close to each other as possible.
2. Press and hold a button on your original transmitter (e.g., Button A).
3. While still holding the button on the original transmitter, press and hold the corresponding button on the SMG-012 duplicator (e.g., Button A).
4. Continue holding both buttons until the LED on the duplicator flashes rapidly. This indicates successful code copying.
5. 두 버튼을 모두 놓습니다.
6. Repeat this process for any other buttons you wish to copy.

The cloning process typically takes about fifteen seconds per button.

Figure: Face-to-face cloning method.

리모컨 작동

Once successfully programmed, your SMG-012 remote control operates identically to your original remote. Simply press the corresponding button to activate the desired function (e.g., open/close garage door, arm/disarm alarm).

Ensure you are within the wireless transmission distance (5-30 meters in open space) for optimal performance. Obstacles such as walls or other electronic devices may reduce the effective range.

유지

배터리 교체:

The remote control uses a standard button cell battery. If the remote's LED does not light up or flashes weakly when a button is pressed, the battery may need replacement. To replace the battery:

1. 리모컨을 조심스럽게 열어보세요asing.
2. 오래된 배터리를 제거하세요.
3. 동일한 종류의 새 배터리를 극성을 확인하여 삽입하십시오.
4. 리모컨을 닫으세요asing 안전하게.

청소:

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

저장:

리모컨의 수명을 연장하려면 건조하고 온도 변화와 직사광선을 피해 보관하십시오.

문제 해결

• Remote not responding after programming:
  • Ensure the history code was cleared correctly before programming (Step 1).
  • Verify that the original remote and the duplicator were placed as close as possible during copying.
  • Confirm that the LED on the duplicator flashed rapidly during Step 2, indicating successful copying.
  • Check if the original remote is functioning correctly.
  • Ensure the battery in the SMG-012 is not depleted.
  • Re-attempt the programming process from Step 1.
• 제한된 범위:
  • 배터리 수준을 확인하세요.
  • Ensure there are no significant obstacles between the remote and the receiver.
  • Avoid using the remote near strong electromagnetic interference sources.
• Incompatible remote:
  • Double-check the frequency of your original remote (must be 868MHz).
  • For Hormann remotes, confirm the buttons are blue and it is not a BS BiSecur version.
  • For Marantec remotes, verify it is an 868MHz model (typically two-tone shell).
  • Refer to the "Compatibility" section for a detailed list of supported models.

사용자 팁

• 호환성을 꼼꼼히 확인하십시오: Before attempting to clone, always confirm that your existing remote control's frequency (868MHz) and model are listed as compatible. Pay special attention to specific details like button color for Hormann remotes (must be blue) and shell design for Marantec remotes (two-tone for 868MHz).
• Optimal Cloning Distance: For the most reliable cloning, place the original remote and the new SMG-012 remote as close as possible, ideally touching, during the copying process.
• Test After Cloning: After successfully cloning a button, always test it with your gate or garage door opener to ensure it functions correctly before relying on it.

보증 및 지원

For any issues, technical support, or warranty inquiries, please contact the manufacturer directly:

제조업체: Shenzhen Scimagic Development Technology Co.Ltd
주소: Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District, Shenzhen, Guangdong, China.

보증 청구를 위해 구매 증빙서류로 구매 영수증을 보관하세요.