ThinkRider Portable Bicycle Chain Cleaner User Manual

1. 서론

The ThinkRider Portable Bicycle Chain Cleaner is an essential tool designed for efficient and hassle-free cleaning of your bicycle chain. It effectively removes dirt, sludge, and rust, ensuring smooth operation and extending the lifespan of your bike chain. Its simple and practical design, combined with internal roller brushes and a filtration system, provides a thorough cleaning experience for all types of bicycle chains.

2. 제품 구성품 및 사양

2.1. 제품 치수

2.2. 내부 구성 요소

• Top Cover Brushes and Gears: Integrated for comprehensive cleaning.
• Filtration Zone: Features a sponge for re-filtering and scraping out impurities from the cleaning solution.
• Washing Area (Top & Bottom): Designed for thorough cleaning, reaching dead spaces.
• Washing Area (Sides): Ensures both sides of the chain are cleaned effectively.
• Removable Internal Parts: Cleaning brushes and linkage gears can be removed for easy maintenance.

2.3. Additional Cleaning Tools

• Brush Cleaner: Specifically designed to remove sludge and dust from the chain surface. Dimensions: 22.5 cm length, 6.3 cm brush width.
• Tooth Cleaner: Ideal for cleaning dead spaces and dirt accumulated between the chain teeth. Dimensions: 22.2 cm length, 7.3 cm tooth length.

3. 설치 및 조립

1. 풀다: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. Open the Cleaner: Locate the 'OPEN' indicator on the lid. Firmly push the lid in the direction of the arrow to open the chain cleaner.



3. 세척 용액 준비: Fill the cleaner with your preferred bicycle chain degreaser or cleaning solution through the designated water inlet. Do not overfill.



4. Attach to Chain: Place the open cleaner around your bicycle chain, ensuring the chain is properly seated within the internal brushes and gears. Close the lid securely until it clicks into place.

4. 사용 설명서

1. 청소기를 배치하세요: Hold the chain cleaner firmly by its handle. Ensure the bicycle is stable, preferably on a stand, with the rear wheel elevated.
2. Rotate the Chain: Slowly rotate the bicycle pedals backward. This will cause the chain to move through the cleaner, allowing the internal brushes and solution to scrub away dirt and grime. Continue rotating until the chain appears clean.



3. 제거 후 헹구세요: Once cleaning is complete, open the cleaner and remove it from the chain. Rinse the chain thoroughly with water to remove any remaining cleaning solution and loosened dirt.
4. Dry and Lubricate: Dry the chain completely using a clean cloth. Apply a suitable bicycle chain lubricant to prevent rust and ensure smooth performance.

5. 유지관리

1. 비우고 헹구세요: After each use, empty any remaining cleaning solution from the chain cleaner. Rinse the cleaner thoroughly with water to remove all residue.
2. 깊은 청소를 위해 분해하십시오: The internal brushes and linkage gears can be removed for more thorough cleaning. Gently detach these components as shown in the product analysis diagram (Figure 3).
3. 깨끗한 구성 요소: Wash the brushes, gears, and the cleaner casing with soap and water. Pay attention to the filtration sponge to ensure it is free of debris.
4. 건조 및 재조립: Allow all parts to air dry completely before reassembling. Ensure all components are correctly re-inserted.
5. 저장: Store the clean and dry chain cleaner in a cool, dry place away from direct sunlight.

6. 문제 해결

• Chain not cleaning effectively:
  • Ensure sufficient cleaning solution is used.
  • Rotate the pedals more slowly to allow brushes more contact time.
  • Check if internal brushes are clogged with excessive dirt; clean them if necessary.
  • Consider using a stronger degreaser for heavily soiled chains.
• Cleaner getting stuck or difficult to move:
  • Verify the chain is properly seated within the cleaner.
  • Ensure the lid is securely closed but not overtightened.
  • Check for any foreign objects inside the cleaner or on the chain.
• Solution leaking from the cleaner:
  • 뚜껑이 단단히 닫혔는지 확인하세요.
  • Do not overfill the cleaner with solution.
  • Inspect the cleaner for any cracks or damage.

7. 사용자 팁

• For best results, use a dedicated bicycle chain degreaser.
• Always lubricate your chain immediately after cleaning and drying to prevent rust and ensure optimal performance.
• Regular cleaning (e.g., every few rides or after riding in wet/muddy conditions) will prevent heavy build-up and make the cleaning process quicker and easier.
• The additional brush and tooth cleaner tools are excellent for pre-scrubbing heavily caked-on dirt or reaching tight spots on the cassette and derailleur.

8. 보증 및 지원

ThinkRider products are manufactured to high-quality standards. For any questions, concerns, or support needs regarding your Portable Bicycle Chain Cleaner, please contact the retailer or manufacturer's customer service. Please retain your proof of purchase for warranty claims.