Manufacturer of commercial and industrial heat trace solutions, including snow melting systems, floor heating cables, and pipe tracing products since 1968.
Delta-Therm Corporation is a leading innovator in heat trace solutions, operating since 1968 to solve complex thermal challenges in commercial, industrial, and residential settings. The company specializes in the design and manufacture of high-quality electric heating systems, including UL-listed snow melting mats, radiant floor heating cables, roof and gutter deicing kits, and pipe tracing solutions.
Delta-Therm focuses on providing practical, compliant, and cost-effective heating products supported by a network of skilled engineering sales representatives and technical support.
최신 매뉴얼 manuals+ 이 브랜드를 위해 큐레이션되었습니다.
이 브랜드의 매뉴얼, 등록, 지원에 대한 일반적인 질문입니다.
Installations generally must meet the requirements of the Canadian Electrical Code (CSA C22.1) and the National Electrical Code (NFPA 70). A Ground Fault Protection device (GFCI or GFEP) is typically required for safe operation.
No. Heating cables usually cannot be cut, shortened, or altered in length under any circumstances, as this may cause overheating and damage to the cable. Always verify constraints in the specific product manual.
Warranty terms vary by product series. For example, the BTR and CBL series floor heating cables are often guaranteed for 25 years against manufacturing defects, while other systems may have a 10-year warranty. Refer to the specific product sheet for details.
Do not energize a damaged cable. For minor damages, specific repair kits (like KIT-SP1) may be available for qualified personnel to perform a splice repair. Significant damage may require replacing the cable entirely.