HopCycle N3 Electric Scooter User Manual

소개

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your HopCycle N3 Electric Scooter. Please read this manual thoroughly before using the scooter to ensure proper handling and to maximize its lifespan.

Image: The HopCycle N3 Electric Scooter, showcasin세련된 디자인이에요.

안전 지침

Always prioritize safety when operating your electric scooter. Adhere to local laws and regulations regarding electric scooter usage. Wearing a helmet and appropriate protective gear is strongly recommended.

• Perform a pre-ride inspection: Check tire pressure, brake function, and battery level.
• 폭우나 폭설과 같은 악천후 시에는 자전거를 타지 마십시오.
• 미끄러운 노면, 자갈길 또는 고르지 않은 지형에서의 주행을 피하십시오.
• 다른 차량과 보행자로부터 안전한 거리를 유지하세요.
• Do not carry passengers or heavy loads that exceed the weight limit.
• 매번 주행하기 전에 모든 구성 요소가 단단히 고정되어 있는지 확인하세요.

설정

스쿠터 펼치기

Your HopCycle N3 Electric Scooter comes pre-assembled and folded for transport. To unfold:

1. 스쿠터를 평평한 표면에 놓으십시오.
2. 핸들바 스템 하단 부근에 있는 접이식 메커니즘 잠금장치를 풀어주세요.
3. 핸들바 스템을 조심스럽게 들어 올려 수직 위치에 고정될 때까지 올리십시오. 잠금 장치가 완전히 체결되었는지 확인하십시오.
4. Adjust the handlebars if necessary and tighten any quick-release clamps.

Image: The HopCycle N3 Electric Scooter shown in both its folded and unfolded states, highlighting its compact design for storage and transport.

초기 충전

Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port on the scooter and then to a power outlet. The charging indicator will show the charging status. A full charge typically takes approximately 4 hours.

Image: Visual representation of the scooter's long-range battery (36V 7.8Ah) and fast charging capability (4 hours).

Voltix APP Connection

The HopCycle N3 Electric Scooter is compatible with the Voltix APP, allowing you to monitor ride data and manage settings. Download the Voltix APP from your smartphone's app store. Follow the in-app instructions to pair your scooter via Bluetooth.

Image: A smartphone screen displaying the Voltix APP interface, showing options for customized speed limits, cycling records, Bluetooth connection, lock/unlock, riding modes, cruise control, and headlight control.

작동 지침

전원 켜기/끄기

To power on the scooter, press and hold the power button on the LED display for 2 seconds. To power off, press and hold the power button again for 2 seconds.

Riding Modes and Speed

The scooter features three riding modes, selectable via the power button (short press to cycle through modes when powered on):

• 에코 모드: Up to 6 MPH (Energy-saving mode for extended range).
• D 모드: Up to 12 MPH (Standard mode for balanced performance).
• S 모드 : Up to 18 MPH (Sport mode for maximum speed).

The maximum speed supported by the 500W motor is 21 MPH, depending on rider weight, terrain, and battery level.

Image: The LED Smart Display on the scooter's handlebar, indicating current speed (km/h and mph), riding mode (ECO, D, S), cruise control status, headlight status, motor overheating warnings, Bluetooth connection, battery level, and the power button.

Image: Illustration of the scooter's 500W peak motor, highlighting its 21-mile long range and 21 MPH maximum speed.

브레이크 시스템

The HopCycle N3 is equipped with a dual braking system for controlled stopping:

• 전자 브레이크: 핸들바의 브레이크 레버로 작동됩니다.
• 후륜 드럼 브레이크: Provides additional stopping power.

급정거나 차량 제어력을 잃지 않도록 항상 부드럽게 브레이크를 밟으십시오.

이미지: 클로즈업 view of the scooter's double braking system, illustrating both the electronic brake on the handlebar and the rear drum brake on the wheel.

타이어

The scooter features 8.5-inch pneumatic (air-filled) tires designed for shock absorption, puncture resistance, and wear resistance, providing a stable and comfortable ride.

이미지: 상세 view of the scooter's 8-inch air-filled tires, highlighting features like puncture resistance, shock absorption, wear resistance, and anti-slip properties.

유지

일반 관리

• 광고를 통해 정기적으로 스쿠터를 청소하세요.amp 천을 사용하세요. 고압수나 독한 화학 약품은 사용하지 마세요.
• 스쿠터는 직사광선과 극한의 온도를 피해 건조하고 서늘한 곳에 보관하세요.
• Check all screws and fasteners periodically and tighten if necessary.

배터리 관리

• 장기간 보관하기 전에는 배터리를 완전히 충전하세요.
• If storing for an extended time, charge the battery to 50-70% every 30-60 days to maintain battery health.
• 배터리를 과충전하거나 완전히 방전시키지 마십시오.

타이어 유지관리

Maintain proper tire pressure for optimal performance and to prevent punctures. Refer to the tire sidewall for recommended pressure. Inspect tires regularly for wear and damage.

Throttle Replacement Guide

For detailed instructions on replacing the throttle, please refer to the official video guide below. This procedure should only be performed by individuals with appropriate mechanical aptitude or by a qualified service technician.

문제 해결

This section addresses common issues you might encounter with your HopCycle N3 Electric Scooter.

명세서

보증 정보

The HopCycle N3 Electric Scooter comes with a 180일 한정 보증 구매일로부터 적용됩니다. 본 보증은 정상적인 사용 조건에서 발생하는 제조상의 결함에 한해 적용됩니다. 오용, 사고, 무단 개조 또는 일반적인 마모로 인한 손상은 보증 대상에서 제외됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

고객 지원

For technical assistance, warranty claims, or any questions regarding your HopCycle N3 Electric Scooter, please contact HopCycle customer support. Refer to the product packaging or the official HopCycle web연락처 정보 사이트.

또한 방문할 수 있습니다 HopCycle Store on Amazon 자세한 정보와 제품 업데이트를 확인하세요.