1. 서론
Thank you for choosing the FOHERE Commercial Ice Maker Machine, Model SKF-AS90FT. This appliance is designed to produce clear ice cubes efficiently for both commercial and residential use. It features a daily ice production capacity of up to 100 lbs, a 24 lbs storage bin, dual water inlet options, and a self-cleaning function. Please read this manual thoroughly before operation to ensure proper use, maintenance, and safety.
2. 안전 지침
To prevent injury to users or damage to the product, always follow basic safety precautions when using electrical appliances. Keep this manual for future reference.
- 제빙기가 접지가 제대로 된 콘센트에 연결되어 있는지 확인하십시오.
- 손상된 전원 코드나 플러그로 제품을 작동하지 마십시오.
- 제빙기를 열원과 직사광선으로부터 멀리 두십시오.
- 기기, 전원 코드 또는 플러그를 물이나 다른 액체에 담그지 마십시오.
- 기기를 사용하는 동안 어린이를 감독하십시오.
- 청소 또는 유지 보수를 하기 전에 제빙기의 전원을 뽑으십시오.
- 얼음을 만들 때는 식수만 사용하세요.
- 장치 주변에 적절한 환기가 이루어지도록 하세요.
3. 설정 및 설치
3.1 풀기
Carefully remove all packaging materials, including tape and protective films. Inspect the ice maker for any damage during transit. Retain packaging for future transport if needed.
3.2 배치
Place the ice maker on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation (at least 5 inches from walls). This model is designed for both freestanding and undercounter installation.
Image: The FOHERE ice maker shown in both undercounter and freestanding configurations, highlighting its versatile placement options.
3.3 물 유입 방식
The ice maker supports two water supply methods:
- Direct Tap Water Connection: Connect the provided water supply hose to a potable water source and the ice maker's water inlet. Ensure all connections are secure to prevent leaks. A water filter is included for improved ice quality.
- Bottled Water Intake: Place a standard gallon water jug onto the designated port on top of the ice maker. No additional plumbing is required for this method.
Image: A visual guide illustrating the two water inlet methods: direct tap water connection with a filter and bottled water placement on top of the unit.
3.4 초기 청소
처음 사용하기 전에 제빙기 내부를 청소하는 것이 좋습니다. 자세한 청소 방법은 '유지 관리' 부분을 참조하십시오.
Video: An official product video demonstrating the setup and initial operation of the FOHERE Commercial Ice Maker Machine.
4. 사용 설명서
4.1 제어판 이상view
The ice maker features an intuitive LED display and control panel. Indicators include Ice, Reservation, Adding Water, Ice Full, Melting, Stoppage, and Clean. Buttons allow for power ON/OFF, ice thickness adjustment (+/-), and activating the reservation/clean functions.
이미지: 자세한 view of the ice maker's control panel with various indicator lights and buttons, alongside the large view잉 창.
4.2 제빙 과정
After connecting the water supply and power, press the 'ON/OFF' button to start the ice making cycle. The machine will automatically fill with water and begin producing ice. Each cycle produces 40 ice cubes, with a cycle time of approximately 8-15 minutes depending on ambient temperature and selected ice thickness.
Image: A visual representation of the ice maker's high-speed ice production, showing the ice tray and cubes.
4.3 얼음 두께 조정
Use the '+' and '-' buttons on the control panel to adjust the ice cube thickness. Thicker ice takes longer to produce but melts slower, while thinner ice is produced faster. The display will show the selected thickness setting.
Image: Demonstrates the adjustable ice thickness feature, showing thin, medium, and thick ice cubes and their suggested applications.
4.4 예약 기능
The 24-hour reservation function allows you to set a timer for the ice maker to start or stop automatically. This is useful for preparing ice in advance or scheduling shutdown during off-peak hours.
5. 유지관리
5.1 자동 청소
The ice maker features an automatic self-cleaning function. To activate, press and hold the 'Clean' button for 6-7 seconds. The cleaning cycle will run for approximately 5-6 minutes. It is recommended to perform this cleaning regularly to maintain hygiene and ice quality.
Image: A visual depiction of the automatic cleaning cycle in progress, showing water circulating within the ice maker.
5.2 정기 청소
In addition to automatic cleaning, periodically clean the ice storage bin, water tray, and exterior surfaces with a mild detergent and warm water. Rinse thoroughly and dry before resuming operation. Ensure the drain plug is accessible for water drainage during cleaning.
6. 문제 해결
제빙기에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 제빙기에서 얼음이 나오지 않습니다 | No water supply; power issue; low refrigerant. | Check water connection/bottle; ensure power is on; contact support if refrigerant is suspected. |
| 얼음 조각이 너무 작거나 부드럽습니다. | Water temperature too high; ambient temperature too high; dirty condenser. | Use colder water; ensure proper ventilation; clean condenser coils. |
| "물 추가" 표시등이 켜져 있습니다. | Water tank is empty; water inlet blocked. | Refill water tank or check tap water supply; ensure water hose is not kinked. |
| 작동 중 이상한 소음 | Loose parts; unit not level; fan obstruction. | Check for loose components; ensure unit is on a level surface; clear any fan obstructions. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
7. 사양
Detailed technical specifications for the FOHERE Commercial Ice Maker Machine, Model SKF-AS90FT:
| 특징 | 사양 |
|---|---|
| 상표 | 포헤레 |
| 모델명 | 상업용 제빙기 |
| 모델 번호 | SKF-AS90FT |
| 제품 크기(D x W x H) | 33.5인치 x 22.3인치 x 61인치 |
| 일일 얼음 생산량 | 100 파운드 |
| Ice Bin Storage Capacity | 24 파운드 |
| 왓tage | 250 와트 |
| 권tage | 120 볼트 |
| 냉각제 | R600a |
| 재료 유형 | 스테인리스 스틸 |
| 포함된 구성 요소 | Ice Maker, Ice Scoop, Ice Basket, Operation Guide, Maintenance Guide |
8. 보증 및 지원
This FOHERE ice maker comes with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact FOHERE customer support through the retailer where the product was purchased or visit the official FOHERE web대지.