Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw Instruction Manual

중요한 안전 정보

Always read and understand this manual before operating the Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, when operating the saw.
• Ensure the safety lock button is engaged to prevent accidental starts when the tool is not in use or during maintenance.
• Keep hands, hair, and loose clothing away from the chain and moving parts.
• Do not operate the saw in wet conditions or near flammable liquids or gases.
• Always maintain a firm grip with one hand on the handle and ensure stable footing.
• Only use the saw for its intended purpose: trimming branches, shrubs, and woody stems up to 5 inches thick.
• 어린이와 주변인이 작업 영역에 접근하지 못하도록 하십시오.

무엇이 포함됩니까?

The Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw package includes the following components:

그림 1: All components included in the Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw kit. This includes the pruning saw, 4.0Ah battery, charger, chain, guide bar, chain cover, oil bottle, wrench, screwdriver, safety glasses, and gloves.

• Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw
• 20V 4.0Ah 리튬 이온 배터리
• 배터리 충전기
• 6-inch Cutting Chain
• 5-inch Guide Bar
• Chain and Sprocket Cover
• Protective Bar Sheath
• Refillable Oil Bottle
• 렌치
• 드라이버
• 안전 안경
• 작업용 장갑
• 사용 설명서

설정

1. 배터리 충전

Before first use, fully charge the 20V 4.0Ah lithium-ion battery. Connect the charger to a standard power outlet and insert the battery. The indicator light on the charger will show the charging status. Refer to the charger's specific instructions for detailed charging procedures and times.

2. Installing the Chain and Guide Bar

1. Ensure the battery is removed from the saw before installation.
2. Remove the chain and sprocket cover using the provided wrench.
3. Carefully place the chain around the sprocket and guide bar, ensuring the cutting edges are facing the correct direction.
4. Reattach the chain and sprocket cover, but do not fully tighten the nuts yet.
5. Adjust the chain tension using the tensioning screw until the chain is snug but can still be pulled freely around the guide bar by hand. There should be no slack on the underside of the guide bar.
6. Once tensioned, fully tighten the nuts on the chain and sprocket cover.

3. Filling the Oil Reservoir (Self-Lubricating System)

그림 2: The self-lubricating system ensures continuous chain lubrication during operation. The oil reservoir is visible on the top of the saw.

The saw features a self-lubricating system to ensure smooth operation and extend chain life. Fill the oil reservoir with appropriate bar and chain oil (not included) using the provided refillable oil bottle. Regularly check the oil level during use and refill as needed.

작동 지침

1. Starting the Saw

그림 3: The safety button lock must be pressed before the trigger can be engaged to start the saw.

1. Ensure the battery is securely inserted into the saw.
2. Grip the saw firmly with one hand.
3. Press and hold the safety lock button (located near the trigger).
4. While holding the safety lock button, squeeze the trigger to start the saw. Release the safety lock button once the saw is running.
5. 톱을 멈추려면 방아쇠를 놓으십시오.

2. 절단 기술

그림 4: The compact design allows for precise cutting of branches up to 5 inches in diameter.

• Always ensure stable footing and a clear work area.
• Position the saw so that the guide bar is perpendicular to the branch being cut.
• Allow the saw to reach full speed before engaging the chain with the wood.
• Apply light, consistent pressure. Do not force the saw through the wood; let the chain do the work.
• Be aware of kickback, especially when the tip of the guide bar contacts the wood.
• For larger branches, make an undercut first to prevent pinching and splintering.
• The saw is designed for branches up to 5 inches thick. Do not attempt to cut larger diameters.

유지

1. 체인 윤활

Regularly check the oil level in the reservoir and refill with quality bar and chain oil. Proper lubrication is critical for chain performance and longevity. A visible oil film should be present on the chain during operation.

2. 체인 연마 및 교체

A dull chain will reduce cutting efficiency and increase strain on the motor. Sharpen the chain regularly or replace it when necessary. Refer to the chain manufacturer's guidelines for proper sharpening angles and techniques. Always ensure the battery is removed before performing any chain maintenance.

3. 청소 및 보관

• After each use, remove the battery and clean the saw. Use a brush or compressed air to remove sawdust, debris, and sap from the guide bar, chain, and motor vents.
• 광고로 외부를 닦다amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• Apply a light coat of oil to the chain and guide bar before storing to prevent rust.
• Store the saw in a dry, secure location, out of reach of children. Use the protective bar sheath to cover the guide bar and chain.
• 배터리는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.

문제 해결

명세서

• 모델: X20-SAW-4A-BLK
• 상표: 선 조
• 전원: 배터리 구동(20V)
• 모터: 550W 브러시 모터
• 가이드 바 길이: 5인치
• Cutting Chain Length: 6인치
• 최대 절단 직경: 최대 5인치
• 배터리: 20V 4.0Ah Lithium-Ion (included)
• 무게: 3.8파운드(도구만)
• 특별 기능: Lightweight, Built-in Safety Features, Self-Lubricating System
• 치수(길이 x 너비 x 높이): 16.3인치 x 5.4인치 x 8.7인치

보증 및 지원

This Sun Joe product is covered by a limited warranty. For detailed warranty information, product registration, or technical support, please visit the official Sun Joe web해당 사이트를 방문하거나 고객 서비스에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: 스노우 조