1. 서론
Thank you for choosing the Ortis Above Ground Smart Pool Timer. This device is designed to automate the operation of your pool pump and salt system, enhancing energy efficiency and simplifying your pool maintenance routine. Featuring dual waterproof outlets, a clear LCD display, and flexible timing functions, this timer is built for reliable outdoor performance. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.
2. 안전 정보
- 전기 안전: Always ensure the timer is connected to a properly grounded outlet. Do not immerse the timer in water.
- 최대 하중: The total current for all connected appliances must not exceed 15 Amperes (15A). Overloading can cause damage to the timer and connected devices, and poses a fire hazard.
- 야외 사용: This timer is designed for outdoor use and features waterproof outlets. However, ensure all connections are secure and protected from direct water spray.
- 단절: Disconnect power before performing any maintenance or when the timer is not in use for extended periods.
- 어린이들: 어린이의 손이 닿지 않는 곳에 보관. 이것은 장난감이 아닙니다.
- 손상: Do not operate the timer if the cord, plug, or housing is damaged. Contact customer support for assistance.
3. 패키지 내용
다음 품목이 패키지에 포함되어 있는지 확인하세요.
- Ortis Above Ground Smart Pool Timer (Model KJ-139)
- 사용 설명서
4. 제품 오버view
Familiarize yourself with the components of your Ortis Smart Pool Timer.
그림 4.1: 앞쪽 view of the Ortis Smart Pool Timer, showing the LCD display, control buttons, and dual outlets (S1 and S2).
4.1. 구성 요소
- LCD 디스플레이: Shows current time, mode, and operational status.
- (M) 모드 버튼: Cycles through different operating modes (Countdown, 24H Auto Cycle).
- (T) Time Button: 현재 시간을 설정하는 데 사용됩니다.
- (^) Up Button: 값을 상향 조정합니다.
- (V) Down Button: 값을 낮춥니다.
- 잠금 버튼: Locks/unlocks the display to prevent accidental changes.
- (Manual) Button: Manually turns outlets S1/S2 ON or OFF.
- (Time ON) Button: Used in 24H Auto Cycle mode to set ON times.
- (전원 버튼: Turns the timer unit ON/OFF.
- S1 & S2 Outlets: Dual waterproof outlets for connecting appliances.
- 전원 코드: Connects the timer to a wall outlet.
그림 4.2: 상세한 view of the LCD screen, showing time, mode, and status indicators.
그림 4.3: View of the waterproof outlet covers, designed for outdoor protection.
5. 설정
5.1. 타이머 설치
- Choose a suitable location near your pool or water feature, ensuring it is within reach of a grounded outdoor power outlet and your appliances.
- Mount the timer securely to a wall or sturdy post using appropriate screws (not included). Ensure it is at a height that allows for easy access to the display and buttons, and that the outlets face downwards to prevent water ingress.
그림 5.1: The timer mounted on a wall, positioned for convenient access near a pool.
5.2. 전원에 연결
- Plug the timer's power cord into a grounded 120V AC outdoor electrical outlet.
- The LCD display should illuminate. If not, press the Power button.
5.3. 기기 연결
- Open the waterproof covers for outlets S1 and S2.
- Plug your pool pump into one outlet (e.g., S1) and your salt system or other appliance into the other outlet (e.g., S2).
- Ensure the total current draw of all connected appliances does not exceed 15A.
- Close the waterproof covers securely around the appliance plugs to maintain weather resistance.
그림 5.2: The timer with a pool pump and salt chlorinator connected to its dual outlets.
6. 사용 설명서
6.1. 현재 시간 설정
- 를 누르고 계세요 (T) Time 시 숫자가 깜빡일 때까지 버튼을 누르세요.
- 사용하세요 (^) Up 그리고 (V) Down 시간을 조정하는 버튼입니다. AM/PM 표시를 확인하세요.
- 를 누르세요 (T) Time button again to move to minute adjustment. Use (^) Up 그리고 (V) Down 분을 설정합니다.
- 를 누르세요 (T) Time button one more time to confirm and exit time setting.
6.2. 카운트다운 모드
This mode allows you to set a specific duration for the connected appliances to run before automatically turning off.
- 를 누르세요 (M) 모드 button until "COUNTDOWN CYCLE MODE" appears on the display.
- The hour digits for the countdown will flash. Use the (^) Up 그리고 (V) Down buttons to set the desired running hours.
- 를 누르세요 (M) 모드 button again to move to minute adjustment. Use (^) Up 그리고 (V) Down to set the desired running minutes.
- 를 누르세요 (M) 모드 button once more to confirm the countdown duration.
- The timer will now display the countdown. The connected appliances will turn ON and run for the set duration, then turn OFF automatically.
6.3. 24H Auto Cycle Mode
This mode allows you to program daily ON/OFF schedules for your appliances.
- 를 누르세요 (M) 모드 button until "24H AUTO CYCLE MODE" appears on the display.
- 를 누르세요 (Time ON) button to enter program setting. The display will show "1 ON".
- 사용하세요 (^) Up 그리고 (V) Down 원하는 켜짐 시간(시와 분)을 설정하려면 버튼을 누르십시오. (Time ON) 시간과 분을 전환합니다.
- After setting the ON time, press (Time ON) 다시 한번. 디스플레이에 "1 OFF"가 표시됩니다.
- 사용하세요 (^) Up 그리고 (V) Down buttons to set the desired OFF time (hour and minute). Press (Time ON) 시간과 분을 전환합니다.
- You can set multiple ON/OFF programs (e.g., 2 ON, 2 OFF, etc.) by repeating steps 3-5. The timer supports multiple programs.
- 모든 프로그램 설정이 완료되면 버튼을 누르십시오. (M) 모드 button to exit program setting and activate the 24H Auto Cycle mode. The timer will now follow your programmed schedule daily.
6.4. 수동 조작
To manually turn the connected appliances ON or OFF, regardless of the programmed schedule:
- 를 누르세요 (조작) button. Each press will cycle through ON, OFF, and AUTO modes for the outlets.
- In AUTO mode, the timer will follow the programmed schedule.
6.5. 잠금 기능
실수로 설정이 변경되는 것을 방지하려면:
- 를 누르고 계세요 잠그다 button for approximately 3 seconds to lock the keypad. A lock icon will appear on the display.
- Repeat the action to unlock the keypad. The lock icon will disappear.
7. 유지관리
- 청소: Disconnect the timer from power before cleaning. Wipe the exterior with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 점검: Regularly inspect the power cord, plug, and outlets for any signs of damage or wear. Ensure waterproof covers are intact and properly sealed.
- 저장: If storing the timer for an extended period, disconnect it from power, clean it, and store it in a dry, cool place away from direct sunlight.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Timer display is off or not responding. | No power; Timer is off; Internal battery low. | Ensure the timer is plugged into a live outlet. Press the 힘 button. If the problem persists, contact support. |
| Appliances not turning ON/OFF as programmed. | Incorrect program settings; Timer in Manual mode; Appliances not properly connected. | Verify program settings in 24H Auto Cycle mode. Ensure the timer is in AUTO mode (not Manual). Check appliance plugs are fully inserted into the timer outlets. |
| Appliances not receiving power in any mode. | Overload; Faulty appliance; Timer malfunction. | Check if the total load exceeds 15A. Test appliances directly in a wall outlet. If they work, the timer may be faulty. Contact support. |
| 키패드가 응답하지 않습니다. | 키패드가 잠겨 있습니다. | 를 누르고 계세요 잠그다 button for 3 seconds to unlock the keypad. |
9. 사양
- 모델: 케이제이-139
- 입력 Voltage: 120V AC, 60Hz
- 최대 부하: 15A/1800W
- 아울렛: 2개의 접지된 콘센트
- 작동 모드: Countdown, 24H Auto Cycle, Manual
- 표시하다: 액정표시장치
- 치수(높이 x 너비 x 깊이): 대략 4.9인치 x 3.3인치 x 3.9인치
- 전원 코드 길이: 약 4.7피트
- 환경 등급 : Outdoor Rated, Waterproof Outlets
그림 9.1: Product dimensions of the Ortis Smart Pool Timer.
10. 보증 및 지원
10.1. 보증 정보
Ortis products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, improper installation, unauthorized repairs, or natural disasters.
10.2. 고객 지원
If you have any questions, require assistance with setup, or encounter any issues not covered in this manual, please contact Ortis customer support. Refer to the product packaging or the Ortis brand store on Amazon for contact details.