소개
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Warmiehomy Rattan Dining Chairs. Please read all instructions carefully before assembly and use to ensure proper function and longevity of your chairs.
설정 및 조립
The Warmiehomy Rattan Dining Chairs require assembly. Please ensure all components are present before beginning. It is recommended to have two people for assembly to facilitate alignment of parts.
구성 요소 체크리스트:
- Chair Frames (4 units)
- Seat Cushions (4 units)
- Rattan Backrests (4 units)
- 조립용 하드웨어(나사, 육각렌치)
- Plastic Protective Pads (pre-attached or separate)
조립 단계:
- Attach the Seat Cushion to the Chair Frame: Position the seat cushion onto the chair frame. Align the screw holes on the bottom of the seat cushion with the corresponding holes on the chair frame.
- Secure the Seat Cushion: Insert the appropriate screws (typically shorter ones) through the frame and into the seat cushion. Important: Do not fully tighten the screws at this stage. Leave them slightly loose to allow for adjustment.
- Attach the Rattan Backrest: Align the rattan backrest with the upper part of the chair frame. Ensure the screw holes on the backrest align with the holes on the frame.
- 등받이를 고정하세요: Insert the appropriate screws (typically longer ones) to attach the backrest to the frame. Again, do not fully tighten these screws yet.
- 최종 조임: Once all components are loosely assembled and all screw holes are aligned, gradually tighten all screws securely. Avoid excessive force, especially when tightening screws for the backrest, as the frame is wood and can crack.
For a visual guide, please refer to the assembly diagram below and the official assembly video.
Figure 1: Step-by-step assembly diagram showing how to connect the chair frame, seat, and backrest. Note the instruction to not overtighten screws initially.
Video 1: Official assembly guide for Warmiehomy Dining Chairs. This video demonstrates the complete assembly process, including tips for aligning screws and securing components.
작동 지침
These dining chairs are designed for indoor use in dining rooms, kitchens, living rooms, bedrooms, offices, guest rooms, restaurants, or coffee bars. The cantilever steel frame provides a slight bounce for comfort, and the rattan backrest offers breathability.
사용 지침:
- 의자를 사용하기 전에 평평하고 안정적인 표면에 놓으십시오.
- Do not exceed the maximum load bearing capacity of 320 lbs per chair.
- 의자 위에 올라서거나 의자를 발판처럼 사용하지 마십시오.
- The armless design allows for easy placement around various dining tables and maximizes space efficiency.
유지
Proper care will extend the life and appearance of your Warmiehomy dining chairs.
청소:
- 좌석 쿠션: The PU leather surface is stain-resistant and easy to clean. Wipe with a soft, damp 천으로 닦아주세요. 잘 지워지지 않는 얼룩은 순한 비누 용액을 사용하여 즉시 닦아내세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
- 등받이 (라탄 소재): Gently wipe the rattan with a soft, dry or slightly damp cloth to remove dust. Avoid excessive moisture.
- 금속 프레임: Wipe the chrome-plated steel frame with a soft, dry cloth. For smudges, a glass cleaner can be used, followed by a dry wipe.
일반 관리 :
- 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the rattan and PU leather.
- Use the provided plastic protective pads on the chair legs to prevent scratches on your floor.
Figure 2: Detail of the high-density sponge cushion with easy-to-clean PU leather surface.
Figure 3: Detail showing the breathable mesh rattan back, chrome-plated sturdy steel frame, and plastic protective pads.
문제 해결
일반적인 문제 및 해결책:
- 문제: 조립 과정에서 나사 구멍이 맞지 않습니다.
해결책: This is a common issue if screws are tightened prematurely. Ensure all screws are only loosely inserted into their respective holes before attempting to fully tighten any of them. This allows for slight adjustments and alignment. Once all screws are in place, gradually tighten them in a cross-pattern. - 문제: The chair rocks or is unstable after assembly.
해결책: This can occur if the frame is not evenly tightened. Loosen all screws slightly, place the chair on a flat surface, and apply even pressure to the seat. Then, gradually tighten all screws again, ensuring the chair remains stable. Check that the plastic protective pads are correctly installed on the bottom of the frame. - 문제: Damage to the rattan backrest during assembly.
해결책: The rattan backrest frame is made of wood. Avoid excessive force when tightening screws into the backrest, as this can cause the wood to crack. If damage occurs, contact customer support for assistance.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 워미호미 |
| 모델 번호 | Dining Chair-02 |
| 색상 | 녹색 |
| 수량 | Set of 4 Pcs |
| 품목 무게 | 66.1파운드(세트당) |
| 스타일 | 현대의 |
| 재료 유형 | Metal (Frame), Rattan (Backrest), PU Leather (Seat) |
| 품목 치수(L x W x H) | 20.86 x 19.68 x 32.67 인치 |
| 최대 하중 지지 | 320파운드 |
| 조립이 필요합니다 | 예 |
Figure 4: Dimensional drawing of the dining chair, showing height, width, and depth measurements in both centimeters and inches.
보증 정보
Specific warranty details for Warmiehomy products may vary. Please refer to the product packaging or the retailer's website for the most accurate and up-to-date warranty information. Typically, products are covered against manufacturing defects for a limited period from the date of purchase.
고객 지원
If you encounter any issues with your Warmiehomy Rattan Dining Chairs or require further assistance, please contact Warmiehomy customer support through the retailer where the product was purchased. You may need your purchase receipt and product model number (Dining Chair-02) for support inquiries.
For general inquiries, you can often find contact information on the Warmiehomy brand store page or the product listing on the retailer's web대지.