CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. 서론

Thank you for choosing the CREWORKS 10L Ultrasonic Cleaner. This professional-grade unit is designed for efficient and thorough cleaning of various items using ultrasonic cavitation. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read these instructions carefully before first use and retain them for future reference.

2. 안전 지침

• 항상 접지된 전원 콘센트에 장치를 연결하세요.
• 탱크에 액체가 없는 상태에서 제품을 작동하지 마십시오.
• Ensure the power cord is not damaged and avoid placing heavy objects on it.
• Keep the unit away from water splashes and do not immerse the main body in water.
• 젖은 손으로 전원 플러그를 만지지 마세요.
• 청소 또는 유지 관리 전에 장치의 플러그를 뽑으십시오.
• 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
• Use appropriate cleaning solutions. Avoid flammable, corrosive, or highly acidic/alkaline liquids.
• Do not operate the unit continuously for extended periods without allowing it to cool down.
• 작동 중에는 장치 주변에 적절한 환기가 이루어지도록 하세요.

3. 제품 오버view

The CREWORKS 10L Ultrasonic Cleaner features a robust 304 stainless steel tank and housing, designed for durability and resistance to corrosion. It incorporates a 240W ultrasonic transducer for powerful cleaning and a 300W heater for optimal temperature control. The intuitive analog control panel allows for precise adjustment of cleaning parameters.

This image shows the CREWORKS 10L Ultrasonic Cleaner from the front, highlighting its stainless steel construction and the analog control panel with two rotary knobs and toggle switches.

주요 구성 요소:

• 스테인레스 스틸 탱크: 10-liter capacity, made from high-quality 304 stainless steel.
• 뚜껑: Reinforced lid to reduce noise during operation.
• 제어판: Analog dials for temperature and timer, with toggle switches for special modes.
• 배수 밸브: Convenient brass valve for easy liquid drainage.
• 통합 핸들: For easy and safe transport of the unit.
• 청소 바구니: Removable stainless steel basket for holding items during cleaning.

A close-up shot of the control panel, clearly showing the temperature and timer dials, along with the power switch and mode selection buttons for Degas and Half-Wave (Delicate) cleaning.

This image shows the ergonomic integrated side handle for easy portability and the robust stainless steel basket designed to hold items during cleaning.

4. 설정

1. 짐 풀기: Carefully remove the ultrasonic cleaner from its packaging. Inspect the unit for any signs of damage.
2. 놓기: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the cleaner.
3. 탱크 채우기: 뚜껑을 열고 스테인리스 스틸 용기에 적절한 세척액을 채우십시오. 세척액 수위가 MIN과 MAX 표시선 사이에 있는지 확인하십시오. 과도하게 채우지 마십시오.
4. 전원 연결: 전원 코드를 접지된 콘센트에 꽂으세요.
5. 항목 로드 중: Place the items to be cleaned into the stainless steel basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom of the tank directly.

5. 사용 설명서

기본 작업:

1. 전원 켜기: 메인 전원 스위치를 '켜짐' 위치로 돌리세요.
2. 설정 온도: Rotate the 'TEMPERATURE' knob to set the desired cleaning temperature between 20°C and 80°C. The 300W heater will begin warming the solution. For faster heating, you may use pre-warmed water.
3. 타이머 설정 : Rotate the 'TIME' knob to set the desired cleaning duration, from 1 to 30 minutes.
4. 청소 시작: The ultrasonic cleaning will start automatically once the timer is set. The unit will stop when the timer counts down to zero.

특수 모드:

• Degas Function: Activate the 'DEGAS' toggle switch. This function expels air bubbles from the cleaning liquid, maximizing cavitation effectiveness for deeper cleaning. It is recommended to run Degas for a few minutes before starting a cleaning cycle, especially with fresh solution.


An illustrative image demonstrating the Degas function, where air bubbles are expelled from the cleaning solution to enhance cavitation and cleaning efficiency.

• Delicate (Half-Wave) Mode: Activate the 'SEMI-WAVE' toggle switch. This mode modulates the ultrasonic power, providing a gentler cleaning action suitable for fragile items such as delicate jewelry, PCBs, or lenses, preventing potential damage.


This image visually represents the Delicate (Half-Wave) mode, indicating how ultrasonic power is modulated to provide a gentler cleaning action for sensitive items.

청소 후:

1. When the cleaning cycle is complete, turn off the unit.
2. Carefully lift the basket out of the tank.
3. Rinse the cleaned items with clean water and dry them thoroughly.
4. 탱크 배수: Place a suitable container under the drain valve. Open the drain valve to empty the cleaning solution. Close the valve once the tank is empty.

A visual comparison showing the effectiveness of the ultrasonic cleaner on various items, with 'Before' and 'After' images of dirty eyeglasses, a used razor blade, and a tarnished printed circuit board.

6. 유지관리

• 장치 청소: After each use, especially after draining, wipe the inside of the tank and the exterior of the unit with a soft, damp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
• 바구니 관리: Clean the stainless steel basket regularly to prevent residue buildup.
• 저장: 초음파 세척기를 사용하지 않을 때는 서늘하고 건조한 곳에 보관하십시오. 세척조가 비어 있고 완전히 건조되었는지 확인하십시오.
• 정기 점검: Periodically inspect the power cord and plug for any damage. Ensure the drain valve operates smoothly.

7. 문제 해결

8. 사양

A diagram showing the external dimensions of the ultrasonic cleaner (33x27x27.5 cm) and the internal dimensions of the tank (30x24x15 cm) and basket (28.3x21.5x12 cm).

9. 보증 및 지원

CREWORKS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.