Autel MaxiIM KM100X Key Programmer User Manual

1. 서론

The Autel MaxiIM KM100X is a professional intelligent key tool designed for automotive key programming. It offers a wide range of functions including universal key generation, transponder reading/writing/cloning, IMMO key learning, and frequency detection. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your KM100X device.

이미지 1.1: 이상view of the Autel MaxiIM KM100X Key Programmer, showing the main unit, MaxiVCI V200, and two smart keys. Key features like 60s key generation, OBD IMMO learning, chip functions, and frequency detection are highlighted.

중요 호환성 고지:

The KM100X is primarily designed for most European vehicles due to regional and manufacturer restrictions. For specific IMMO functions on European cars (e.g., Renault, Mercedes-Benz, BMW, Audi, Skoda, Seat, VW, Jaguar, Land Rover, Porsche, Volvo, PSA), the KM100X may not support "All Keys Lost" functions and may require disassembly for key programming. For these vehicles, IM508S / IM608 Pro tools are recommended. Before purchase, it is advised to contact Autel support with your vehicle's VIN to verify full compatibility. For Asian and American vehicles (e.g., Ford, GM, Toyota, Lexus), the KM100X supports adding new keys, and for some, "All Keys Lost" functions.

2. 설치 및 패키지 구성품

2.1 패키지 내용물:

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

• Main Unit (Autel MaxiIM KM100X)
• MaxiVCI V200 (Wireless Vehicle Communication Interface)
• Universal Smart Key (First)
• Universal Smart Key (Second)
• Type-C USB 케이블
• Custom Mini USB Cable (for key programming)
• USB-C to USB-C 케이블
• 전원 어댑터
• 빠른 참조 가이드
• 운반 케이스

이미지 2.1: 상세 view of the Autel MaxiIM KM100X packing list, illustrating the main unit, MaxiVCI V200, two smart keys, various cables, power adapter, quick reference guide, and carrying case.

2.2 초기 설정:

1. 기기 충전: Connect the KM100X main unit to the power adapter using the provided USB-C cable and charge it fully before first use.
2. 전원 켜기: 전원 버튼을 길게 눌러 장치를 켭니다.
3. 언어 선택: The default language is English. If you need to change the menu language, please contact Autel support with your device's serial number (located on the back of the device).
4. 소프트웨어 업데이트: Ensure the device software is up-to-date. Connect to a Wi-Fi network and navigate to the "Update" section in the device menu to download and install the latest software version (e.g., V1.37 or newer). The device can be used without internet after the initial update.
5. MaxiVCI V200 연결: The MaxiVCI V200 is a wireless vehicle communication interface. It connects to the vehicle's OBD-II port and communicates wirelessly with the KM100X main unit via Bluetooth.

3. 사용 설명서

3.1 Universal Key Generation:

The KM100X can generate universal smart keys for over 700 vehicle models, often within 60 seconds, offering a 50% faster generation speed compared to other tools. It supports AutoVIN for quick vehicle identification.

1. Select "Universal Key" 메인메뉴에서.
2. Identify Vehicle: Use the AutoVIN feature or manually select the vehicle make, model, and year.
3. Generate Key: Follow the on-screen prompts to generate the universal key. The device will guide you through the process.
4. IMMO Learning: After key generation, proceed directly to IMMO learning to pair the new key with the vehicle's immobilizer system.

Image 3.1: The KM100X device displaying the 60-second key generation process, highlighting its speed and efficiency compared to manual input methods.

3.2 Transponder Functions (Read, Write, Clone, Generate, Simulate, Convert):

The KM100X provides comprehensive transponder capabilities, including reading, writing, cloning, generation, simulation, and conversion between ID63 and ID83 transponders.

1. Select "Reading/Cloning" or "Transponder Function" 메인메뉴에서.
2. Place Transponder: Position the transponder chip or key in the designated slot on the KM100X device.
3. 작업 수행:
   • Read Chip: View transponder information such as chip type, IMMO type, transponder ID, locking status, and code mode.
   • Clone Chip: Detect and decrypt transponder data to generate a functional clone.
   • Edit Chip: Modify transponder configurations and EEPROM data.
   • 트랜스폰더 생성: Create new transponder chips.
   • Simulate Transponder: Emulate transponder behavior.
   • Convert Transponder: Convert between ID63 and ID83 transponder types.

Image 3.2: The KM100X interface demonstrating professional chip reading, cloning, and editing capabilities, displaying detailed transponder information.

3.3 IMMO Key Learning via OBD:

The KM100X supports IMMO key learning via OBD for approximately 90% of vehicles. This includes functions like PIN reading, key learning, remote learning, "All Keys Lost" functions (where supported), IMMO ECU reset/adaptation/refresh/coding, and IMMO data backup/restore.

1. MaxiVCI V200 연결: Plug the MaxiVCI V200 into the vehicle's OBD-II port.
2. 의사소통 체계를 구축하세요: Ensure the KM100X main unit is wirelessly connected to the MaxiVCI V200 via Bluetooth.
3. Select "IMMO" 메인메뉴에서.
4. 화면의 지시를 따르세요: The device will guide you through the specific IMMO learning procedures for the identified vehicle. This may involve reading PIN codes, adding new keys, or performing "All Keys Lost" procedures.

3.4 특수 기능:

The KM100X integrates several special functions to simplify key programming tasks:

• 주파수 감지: Quickly and accurately identify key frequency and RF signal modulation. Place the key near the device's frequency detection area.
• Button Adjustment: Customize button functions for keys.
• Key Unlocking: Unlock previously locked keys.
• Universal Key Information Detection: Read detailed information from universal keys.
• Ignition Coil Detection: Collect IMMO protocol data and transponder type from vehicle ignition coils.
• Integrated APB112 Functions: The KM100X includes all functions of the Autel APB112 smart key fob emulator, such as collecting data from ignition coils, identifying coil issues, 46/4D chip key data collection, 46 smart key password calculation, 46 chip emulation, and Toyota 4D/H smart key emulation.

Image 3.3: The KM100X main screen showing icons for Universal Key, Reading/Cloning, Transponder Function, Frequency Detection, IMMO, and Special Function, indicating the device's comprehensive capabilities.

Image 3.4: The KM100X device demonstrating frequency detection, showing the key placed near the device and the frequency reading on the screen.

4. 유지관리

• 소프트웨어 업데이트: Regularly check for and install software updates to ensure optimal performance, expanded vehicle coverage, and new features. Connect the device to Wi-Fi and navigate to the "Update" section.
• 청소: 기기의 화면과 본체를 닦을 때는 부드럽고 마른 천을 사용하십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• 저장: Store the KM100X in its carrying case in a cool, dry place when not in use to protect it from dust and physical damage.
• 배터리 관리 : 배터리 수명을 연장하려면 기기를 자주 완전히 방전시키지 마십시오. 특히 장기간 보관할 경우 기기를 정기적으로 충전하십시오.

5. 문제 해결

6. 사양

7. 보증 및 지원

7.1 제조업체 보증:

The Autel MaxiIM KM100X comes with a 1년 제조사 보증 구매일로부터. 보증 청구를 위해 구매 증빙을 보관하세요.

7.2 기술 지원:

For technical assistance, compatibility inquiries, language change requests, or any other support needs, please contact Autel support:

• 이메일: auteldirect@outlook.com
• When contacting support, please provide your device's serial number (12 digits, found on the back of the device) and a detailed description of your issue or request.

메모: If you need to return the device, please select the "DEFECTIVE" option to ensure proper processing and prevent it from being resold to other customers.