CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. 중요 안전 지침

본 제품을 작동하기 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.

• Always connect the unit to a grounded outlet.
• 본체를 물이나 기타 액체에 담그지 마십시오.
• 탱크에 세척액이 없는 상태에서 청소기를 작동하지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive liquids.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. 제품 오버view

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

주요 특징

• 10L 용량: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• 스윕 기능: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• 탈기 모드: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• 조정 가능한 전력: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• 조정 가능한 타이머: 0-30 minute timer for precise control over cleaning cycles.
• 온도 조절: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• 304 스테인리스 스틸 구조: Durable and corrosion-resistant tank and housing.
• 통합 배수 포트: For convenient and mess-free fluid drainage.

패키지 내용

포장을 풀 때 모든 품목이 들어 있고 상태가 양호한지 확인하세요.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 X 전원 코드
• 1 x Mesh Basket
• 1 x 배수 호스
• 1 x 사용 설명서

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

이미지: 오버view of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. 설정

1. 짐 풀기: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. 놓기: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. 전원 연결: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. 탱크를 채우세요: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. 장바구니에 담기: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. 운영

Familiarize yourself with the control panel before beginning operation.

제어판 이상view

이미지: 자세한 view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• 전원 스위치: 기기를 켜거나 끕니다.
• 타이머 제어: Adjusts the cleaning duration from 0 to 30 minutes.
• 온도 조절: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

청소 절차

1. 준비할 항목: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. 솔루션 추가: Fill the tank with the appropriate cleaning solution.
3. 설정 온도(선택 사항): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. 청소 시작: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. 진행 상황 모니터링: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. 청소 마무리: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. 헹구고 말리세요: 세척한 물건들을 깨끗한 물로 충분히 헹구고 완전히 말리세요.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. 유지관리

적절한 유지 관리는 초음파 세척기의 수명과 최적의 성능을 보장합니다.

• 탱크 배수: After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• 탱크 청소: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
• Lid and Basket: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• 저장: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• 정기 검사: Periodically inspect the power cord for any damage. If damaged, discontinue use and contact customer support.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. 문제 해결

일반적인 문제와 해결 방법은 이 섹션을 참조하세요. 문제가 지속되면 고객 지원팀에 문의하세요.

7. 사양

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: CREWORKS Store on Amazon