Perlegear 풀모션 TV 벽걸이 마운트 사용 설명서

1. 안전 정보

중요한: Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Perlegear is not responsible for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.

• 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
• Use the provided screws and hardware. Do not overtighten screws.
• 본 제품은 실내에서만 사용하도록 설계되었습니다.
• 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
• 스터드 탐지기를 사용하여 목재 스터드를 찾거나 콘크리트/벽돌처럼 단단한 곳에 설치하십시오.

2. 패키지 내용

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.

이미지: 이상view of the Perlegear Full Motion TV Wall Mount and its included accessories, such as the wall plate, TV bracket arms, a small bubble level, and cable ties.

일반적인 패키지 내용물은 다음과 같습니다.

• 벽판 조립체
• TV 브래킷 암 (2개)
• 하드웨어 키트(다양한 나사, 와셔, 스페이서, 앵커)
• 버블 레벨
• 케이블 타이

3. 필요한 도구

설치에 일반적으로 필요한 도구는 다음과 같습니다(포함되어 있지 않음).

• 연필
• Phillips 헤드 스크루 드라이버
• 전기 드릴
• 스터드 파인더(목재 스터드 설치용)
• Masonry Drill Bit (for concrete/brick installation)
• 줄자
• 소켓 렌치(래그 볼트용)

4. 호환성

This TV wall mount is designed for televisions within specific size, weight, and VESA pattern ranges.

• TV 크기 : 26 to 60 inches (PGMFK6) / 32 to 65 inches (PGMF24B)
• 중량 용량: 최대 45kg(99파운드)
• VESA 호환성: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm.

Image: Illustration of compatible VESA mounting patterns, indicating the horizontal and vertical distances between the four mounting holes on the back of a television.

To determine your TV's VESA pattern, measure the horizontal and vertical distance between the mounting holes on the back of your TV in millimeters.

5. 설치 단계

Follow these steps carefully for a secure installation. It is recommended to have two people for certain steps.

5.1. 벽 준비

1. Determine the desired height for your TV. Mark the center of where the TV will be positioned.
2. Use a stud finder to locate the center of a wood stud for wood stud installation. For concrete/brick walls, ensure the wall is solid.

5.2. 벽면 플레이트 장착

Position the wall plate at the marked location. Use the integrated bubble level or the included level to ensure it is perfectly horizontal. Mark the drill holes.

• 목재 스터드용: Drill pilot holes (e.g., 5.5mm / 7/32 inch) into the center of the studs. Attach the wall plate using lag bolts and washers. Do not overtighten.
• 콘크리트/벽돌 벽의 경우: Drill holes (e.g., 10mm / 3/8 inch) to the appropriate depth. Insert concrete anchors flush with the wall surface. Attach the wall plate using lag bolts and washers.

Image: The wall plate of the TV mount securely fastened to a wall, highlighting its strong construction and ability to support up to 45 kg (99 lbs) of weight.

5.3. TV 브래킷을 TV에 부착하기

TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.

1. Select the correct diameter and length of screws for your TV's VESA holes from the hardware kit. Use washers and spacers if necessary to ensure the screws do not bottom out or protrude too far.
2. Attach the two TV bracket arms to the back of your TV using the selected screws. Ensure the hooks on the brackets are facing upwards and the brackets are centered.

5.4. TV를 벽면 플레이트에 장착하기

With assistance, carefully lift the TV and hook the TV bracket arms onto the wall plate. Ensure the brackets are fully seated on the wall plate.

1. Secure the TV to the wall plate using the safety screws or locking mechanisms provided on the bracket arms. This prevents accidental dislodgement.

6. 운영 및 조정

This full motion mount allows for various adjustments to achieve optimal view각도를 나타냅니다.

6.1. 회전 조절

The TV can be swiveled left or right up to 90 degrees in each direction, depending on TV size and wall distance, to provide a wide range of view각도를 나타냅니다.

Image: The TV mount extended and swiveled, demonstrating its ability to rotate the television up to 180 degrees horizontally for flexible view직책을 맡고 있습니다.

6.2. 기울기 조정

The TV can be tilted upwards by 5 degrees and downwards by 15 degrees to reduce glare and optimize view서로 다른 높이에서.

Image: A television mounted on the wall, illustrating its tilt capability with a range of +5 degrees upwards and -15 degrees downwards for comfortable view주고받음.

6.3. 확장 및 수축

The mount allows the TV to extend up to 475mm (18.7 inches) from the wall and retract to a minimum distance of 70mm (2.7 inches) to save space.

이미지: 오버헤드 view demonstrating the TV mount's flexibility, showing it can extend up to 475mm from the wall and retract to a minimum of 70mm.

6.4. 레벨링 조정

After installation, the TV can be rotated ±3 degrees for perfect leveling, ensuring a straight view경험.

Image: A television mounted on the wall, illustrating the post-installation leveling adjustment feature, allowing for a rotation of ±3 degrees to ensure perfect horizontal alignment.

7. 유지관리

정기적인 유지 관리는 TV 벽걸이 거치대의 수명과 안전한 작동을 보장하는 데 도움이 됩니다.

• Periodically check all screws and connections to ensure they are secure. Retighten if necessary, but do not overtighten.
• 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.

8. 문제 해결

If you encounter issues during or after installation, refer to the following common solutions:

• TV가 수평이 아닙니다: Use the post-installation leveling adjustment feature (refer to section 6.4) to fine-tune the horizontal alignment.
• 마운트가 느슨해진 느낌: Recheck all wall plate and TV bracket screws. Ensure they are tightened securely according to the instructions. Verify the wall type and anchors used are appropriate.
• TV does not fit VESA pattern: Double-check your TV's VESA pattern against the mount's compatibility (refer to section 4). Ensure you are using the correct screws and spacers.
• Difficulty moving the mount: Ensure no cables are snagged. Check for any overtightened bolts on the articulating arms. Apply lubricant if necessary (refer to section 7).

If problems persist, contact Perlegear customer support for assistance.

9. 사양

• 모델 번호: PGMFK6, PGMF24B
• TV 크기 호환성: 26-60 inches (PGMFK6), 32-65 inches (PGMF24B)
• 중량 용량: 45kg(99파운드)
• VESA 호환성: 75x75mm ~ 400x400mm
• 기울기 범위 : +5° / -15°
• 회전 범위: Up to 90° left/right (depending on TV size)
• Screen Level Adjustment: ±3°
• 찬성file from Wall: 70mm (retracted) to 475mm (extended)
• 재료: 고급강철

10. 보증 및 지원

Perlegear provides a limited warranty for this product. Please refer to the warranty card included in your package or visit the official Perlegear web자세한 보증 약관은 해당 사이트에서 확인하세요.

For technical support, missing parts, or any questions regarding the installation or operation of your Perlegear TV wall mount, please contact Perlegear customer service through their official web사이트 또는 제품 포장에 제공된 연락처 정보를 참조하세요.