AOSHIDA Gustard DAC-R26II Network Streaming DAC User Manual

1. 서론

This manual provides detailed instructions for the setup, operation, and maintenance of your AOSHIDA Gustard DAC-R26II Network Streaming DAC. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your audio experience.

The Gustard DAC-R26II is a high-performance 26-Bit R2R Digital-to-Analog Converter with integrated network streaming capabilities, supporting a wide range of digital audio formats and inputs for a versatile home audio setup.

2. 설정

2.1. 포장 목록

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Main Unit (Gustard DAC-R26II)
• 보증 카드
• 빠른 시작 가이드
• 전원 코드
• USB 케이블
• 원격 제어
• 블루투스 안테나

Figure 2.1: Contents of the Gustard DAC-R26II package.

2.2. 언박싱 및 초기 검사

Carefully unbox your DAC-R26II and inspect all components for any signs of damage. The following video demonstrates the unboxing process:

2.3. 전면 패널 소개

The front panel of the DAC-R26II features controls and a display for easy operation:

그림 2.3: 전면 view of the Gustard DAC-R26II.

1. 전원 버튼: Switches between Standby and Operation states. The unit remains in standby when the rear power switch is on.
2. 디스플레이 화면: 현재 입력 채널, 인코딩 형식 및 s를 표시합니다.ampling rate. Displays menu items when entering the settings menu.
3. 볼륨 표시: Ranges from -90dB to 00dB. "FIXED" indicates fixed volume output (bypass). Displays options when in the settings menu.
4. Setting/Volume Button (-): Typically used to decrease volume. In the menu interface, it is used to switch options.
5. Menu/Input Button (⚙️): Short press to switch input selection; Long press to enter or exit the menu; Short press within the menu to toggle items.
6. Volume Button (+): Typically used to increase volume. In the menu interface, it is used to switch options.

2.4. Rear Panel Interface

후면 패널에는 다양한 입력 및 출력 연결 단자가 있습니다.

Figure 2.4: Rear panel connections of the Gustard DAC-R26II.

• XLR Right (Balanced) / XLR Left (Balanced): 밸런스드 아날로그 오디오 출력.
• RCA Right (Single-Ended) / RCA Left (Single-Ended): Single-ended analog audio outputs.
• LAN (Network Input): RJ45 port for network streaming.
• USB: 컴퓨터 연결용 USB 입력 단자.
• IIS Input (HDMI format): High-quality digital input.
• 동축 입력: S/PDIF coaxial digital input.
• AES/EBU Digital Input: 전문적인 디지털 오디오 입력.
• 광학 입력: S/PDIF optical digital input.
• 10MHz Clock Input (BNC): External clock synchronization input.
• Firmware Update Port (UPDATE): For device firmware updates.
• 블루투스 안테나: 포함된 Bluetooth 안테나의 연결 지점입니다.
• 권tage 선택기: Switch for 115V or 230V AC power.
• 퓨즈: Power fuse compartment.
• AC 전원 입력: IEC power inlet.
• 전원 스위치: 메인 전원 켜짐/꺼짐 스위치.

경고: When operating the voltage selector, ensure both switches are set to the same voltage (110V or 220V) matching your local power supply. Failure to do so will damage the internal transformer upon power-up.

3. 사용 설명서

3.1. Display Screen Introduction

The R26II utilizes a large OLED display to provide real-time status and functional information.

그림 3.1: 이상view of the DAC-R26II display screen.

• 입력 채널: Indicates the currently selected input (e.g., COAX, AES, OPT, USB, IIS, BT, Streamer).
• 인코딩 형식: Shows the audio encoding format (e.g., PCM, DSD).
• Samp링 비율: 현재 s를 표시합니다ampling rate (e.g., 44.1kHz, 192kHz, DSD256).
• 용량: Shows the current volume level or "FIXED" for bypass mode.
• 외부 시계: Indicates if an external 10MHz clock is detected.

3.2. 입력 채널 선택

The R26II has 7 input channels. In the main screen state, short press the Menu/Input button (⚙️) to cycle through input selections: COAX, AES, OPT, BT, USB, Streamer, IIS.

3.3. Volume Regulation

In the main screen state, use the +/- buttons to adjust the analog volume attenuation. The volume range is -90dB to 00dB (Total 90 steps). In "FIXED" mode, the volume is at 00dB. Increasing it further enters Fixed Output Mode (Volume Bypass). Decrease volume to exit FIXED mode.

3.4. 설정 메뉴

To enter the settings menu, long press the Menu/Input button (⚙️). Use the +/- buttons to adjust the currently selected option. Long press the Menu/Input button again to return to the main display.

Menu Items Overview:

1. PCM FILTER: PCM Digital Filter Adjustment
2. DSD DIRECT: DSD Direct Mode
3. NOS MODE: PCM NOS (Non-Oversampling) Mode
4. REF CLOCK: Reference Clock Source Selection
5. IIS MODE: IIS Pin Sequence Configuration
6. 단계: Analog Output Phase Control
7. 디스플레이: 화면 밝기
8. 대기 : Standby Mode Behavior

3.4.1. PCM 필터 (PCM 디지털 필터 조정)

The R26II features a high-performance built-in PCM upsampler with 3 operation modes:

• 빠른: High-speed mode, detailed high-frequency information. (Default)
• 중간: Medium-speed mode, balanced sound. (Recommended)
• 느린: Low-speed mode, soft listening experience.

3.4.2. DSD DIRECT (DSD Direct Mode)

• 장애를 입히다: Turns off direct mode. (Default)
• 할 수 있게 하다: Turns on direct mode.

When enabled, the DSD signal bypasses the DSD-to-PCM conversion and is sent directly to the dedicated 1-bit architecture decoding circuit. This allows original DSD signals (upsampled via PC/software) to be processed natively, potentially offering higher sound quality.

Note: Enabling this may cause a "click" sound when switching between different sampling formats.

3.4.3. NOS MODE (PCM Non-Oversamp링 모드)

• 장애를 입히다: (기본)
• 할 수 있게 하다:

Bypasses internal PCM filters, sending the original PCM signal directly to the R-2R decoding matrix. This mode is ideal for users who use high-performance software (like HQPlayer) to perform formats that may cause a click sound in this mode.

3.4.4. REF CLOCK (Reference Clock Source Selection)

The R26II uses the GUSTARD-GCLK-02 synthesizer for ultra-low noise and jitter. Its synthesized clock achieves ultra-low jitter performance at the femtosecond level, while simultaneously preserving the near-end performance of the reference clock. Thanks to the high-precision divider, the frequency accuracy of its synthesized audio clock reaches the ppb level. As a result, the main clock for most of the digital processing circuits built into the R26II is also synthesized by the GCLK-02.

REF CLOCK 옵션:

• 내부: Uses the internal femtosecond clock. (Default)
• EXT.10MHz: Selects an external 10MHz reference source.

Note: If "EXT" is selected but the clock is lost or deviates > ±150ppm, "EXT ERR" will be displayed.

3.4.5. IIS MODE (IIS Pin Sequence Configuration)

The IIS input over HDMI supports PCM and DSD automatically. No flag signal is needed. There are four pin sequence modes available to match different source devices.

• MODE1 (Gustard): Standard Gustard definition. Matches Gustard U16, U18, S16, etc. (Default)
• MODE2 / MODE3 / MODE4: Alternative pin definitions.

IIS Pinout Diagrams (refer to original manual for detailed diagrams if needed, but for this output, I'll just list the modes).

3.4.6. PHASE (Analog Output Phase Control)

• Non-inverted: RCA Positive Phase / XLR American Standard (1GND, 2 Hot, 3 Cold). (Default)
• 역으로: RCA Inverted Phase / XLR Japanese/European Standard (1GND, 2 Cold, 3 Hot).

3.4.7. DISPLAY (Screen Brightness)

• 자동 : Automatically dims the screen. (Default)
• AUTO ALL OFF: Automatically turns off screen and buttons.
• AUTO DISPLAY OFF: Automatically turns off the screen only.

Note: The screen will wake up momentarily when the sampling rate or format changes.

3.4.8. STANDBY (Standby Mode Behavior)

• 수동 : The unit enters standby when AC power is connected; requires pressing the power button to turn on. (Default)
• 자동: The unit turns on automatically when AC power is connected.

3.5. 원격 제어

The R26II is equipped with a new brand remote controller. This remote can also control other types of products from Gustard. Hold the DAC button for 3+ seconds to enter the DAC control mode.

Figure 3.5: Gustard DAC-R26II Remote Control.

1. 대기 버튼 : Toggles between Operation and Standby. Wake up the screen in standby mode.
2. 메뉴: Enter function settings.
3. 방향 패드:
   • Up/Down: Switch function.
   • Left/Right: Adjust options.
   • Center: Unmute / Mute.
4. 뒤: 메인 화면으로 돌아갑니다.
5. VOL - / VOL +: 볼륨을 조절하세요.
6. DAC / AMP / STREAM Buttons: Used to select the device type the remote controls. Hold the respective button for 5 seconds to switch modes.
   • DAC : Used to control decoder products (e.g., X18, R26).
   • AMP: Used to control amplifiers (e.g., H16, P26).
   • 개울: Used to control streamer products.

주의:

• 작동거리는 각도에 따라 다릅니다.
• The remote control may not function properly if there are objects between the remote control and the sensor.
• Remove the batteries if the remote control will not be used for an extended period (one month or longer).
• If the battery leaks, thoroughly clean all residue from the battery compartment and install new batteries.
• Using this remote control may cause malfunctions in other devices controlled by infrared signals.

3.6. Streamer Usage (Network Bridge)

The R26II includes a network bridge for streaming audio. Follow these steps to use the streamer function:

1. Connect the R26II to your LAN via the RJ45 port.
2. Select the Streamer input channel on the DAC.
3. Wait for the system to boot (approximately 1 minute). The screen will show "DSD 24.5M" or similar.
4. Open a browser on a device in the same LAN and visit: http://r26.local.
5. 에서 web interface, you can enable/disable protocols (AirPlay, Roon Bridge, UPnP, HQPlayer NAA, Spotify) to optimize performance.
6. Firmware updates for the bridge are also handled via this web 페이지.

Figure 3.6: Network Bridge System web interface for protocol management.

4. 유지관리

To ensure the longevity and optimal performance of your Gustard DAC-R26II, follow these maintenance guidelines:

• 청소: Use a soft, dry cloth to clean the exterior of the unit. Avoid using liquid cleaners, aerosols, or abrasive materials, as they may damage the finish.
• 통풍: Ensure the unit is placed in a well-ventilated area. Do not block the ventilation openings.
• 힘: 장시간 기기를 사용하지 않을 경우에는 벽면 콘센트에서 전원 코드를 뽑아 두세요.
• 환경: 극한의 온도, 습도 또는 직사광선에 장치를 노출시키지 마십시오.

5. 문제 해결

If you encounter issues with your DAC-R26II, refer to the following common troubleshooting steps:

• 전원 없음:
  • 전원 코드가 본체와 벽면 콘센트에 제대로 연결되어 있는지 확인하십시오.
  • Ensure the rear power switch is in the "ON" position.
  • 볼륨을 확인하세요tage selector matches your local power supply.
  • 퓨즈를 점검하십시오. 끊어졌다면 동일한 종류와 정격의 퓨즈로 교체하십시오.
• 사운드 출력 없음:
  • Confirm the correct input channel is selected on the DAC.
  • Check the volume level on the DAC and your connected amplifier. Ensure the DAC is not in "FIXED" volume mode if you intend to control volume via the DAC.
  • 귀하의 것을 확인하십시오 amplifier or active speakers are powered on and correctly connected.
  • 모든 오디오 케이블의 연결 상태와 손상 여부를 확인하십시오.
• "EXT ERR" on Display:
  • This indicates an issue with the external 10MHz clock. Ensure the external clock source is properly connected and functioning, or switch the REF CLOCK setting to "Internal".
• 네트워크 스트리밍 문제:
  • LAN 케이블이 제대로 연결되어 있는지 확인하십시오.
  • Verify that the DAC is connected to the same network as your control device.
  • 접근하기 web 인터페이스(http://r26.local) to check network status and protocol settings.

If the problem persists, please contact AOSHIDA customer support for assistance.

6. 사양

7. 보증 및 지원

Your Gustard DAC-R26II comes with a warranty. Please refer to the included Gustard Warranty Card for specific terms and conditions regarding your product's warranty coverage.

For technical support, service, or any inquiries not covered in this manual, please contact AOSHIDA customer support through their official channels or visit their web최신 지원 정보는 사이트에서 확인하세요.

You can find more information and contact details on the AOSHIDA store page: AOSHIDA Store.