1. 서론
This manual provides essential instructions for the safe and efficient use of your DATOUBOSS FBM-JC-6232-EU-3 Home Energy Storage System. This all-in-one unit integrates a powerful 48V 6200W hybrid inverter with a 48V 628Ah Lithium Iron Phosphate (LiFePO4) battery, offering a total capacity of 32.15 kWh. Designed for home energy storage, off-grid solar systems, and backup power applications, this system simplifies installation by combining components into a single, movable unit.
The system features a base equipped with movable pulleys, allowing for easy relocation after unpacking without manual installation. Its integrated design eliminates the need for separate inverter and battery purchases, reducing complex wiring and communication setups.
2. 안전 정보
Read all safety instructions carefully before installation, operation, or maintenance. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
2.1 일반 안전 예방 조치
- 적격 직원: Installation and maintenance must be performed by qualified personnel familiar with electrical systems and battery storage.
- 전원 분리: Always disconnect all power sources (AC grid, PV input, battery) before performing any service or maintenance.
- 접지: 시스템이 현지 전기 규정에 따라 올바르게 접지되었는지 확인하세요.
- 통풍: Install the system in a well-ventilated area to prevent overheating. Do not block ventilation openings.
- 무게: The unit weighs approximately 526 pounds (239 kg). Use appropriate lifting equipment and techniques to prevent injury during unpacking and placement.
- 환경: Do not expose the unit to rain, snow, liquids, or excessive dust. Operate within specified temperature and humidity ranges.
2.2 배터리 안전
The integrated LiFePO4 battery includes a Battery Management System (BMS) for protection. However, observe the following precautions:
- 분해 없음: Do not attempt to open or disassemble the battery pack or the system unit. There are no user-serviceable parts inside.
- 단락을 방지하세요: Ensure all connections are secure and prevent any possibility of short circuits.
- 온도: The BMS protects against overheating and low temperatures. However, avoid installing the unit in environments with extreme temperatures outside the operating range (-10°C to 50°C).
- 손상: If the battery or unit appears damaged, do not operate it. Contact customer service immediately.
3. 제품 오버view
The DATOUBOSS Home Energy Storage System is an all-in-one solution featuring a hybrid inverter, a high-capacity LiFePO4 battery, and an integrated Battery Management System (BMS). It is designed for ease of use and monitoring through its touch color LCD display.
3.1 주요 구성 요소
- 하이브리드 인버터: 48V 6200W capacity, managing power flow between solar panels, battery, grid, and loads.
- LiFePO4 배터리: 48V 628Ah (32.15 kWh) for stable and long-lasting energy storage.
- 배터리 관리 시스템(BMS): Built-in protection against overcharging, over-discharging, over-current, short circuits, overheating, and low temperatures.
- Touch Color LCD Display: For monitoring system status and configuring settings.
- Movable Casters: 360° swivel casters for easy mobility of the unit.
3.2 Front Panel and Connections
The front panel provides access to the touch screen, indicator lights, and control buttons. The lower section houses the various input and output ports.
- 터치 스크린: Main interface for monitoring and control.
- 표시등: RUN (operation status), ALM (alarm), RESET (system reset).
- 배터리 표시등: Shows charge level (100%, 75%, 50%, 25%).
- AC IN ON/OFF Switch: Controls the AC grid input.
- ON/OFF Inverter Switch: Controls the inverter operation.
- 온/오프 배터리 스위치: Controls the battery power.
- AC OUT ON/OFF Switch: Controls the AC output to loads.
- PV ON/OFF Switch (x2): Controls the solar panel inputs.
- PV Interface (x2): 태양광 패널에 연결됩니다.
- AC 입력: 전력망에 연결됩니다.
- AC 출력(x2): Provides power to household loads.
4. 설정
4.1 포장 풀기 및 배치
The DATOUBOSS system is shipped in a protective crate. Due to its significant weight (approximately 526 pounds / 239 kg), ensure adequate personnel or lifting equipment is available for safe handling.
- 장치를 포장에서 조심스럽게 꺼냅니다.
- Utilize the integrated movable pulleys to position the unit in its desired location.
- Ensure the installation area is well-ventilated, dry, and free from direct sunlight or heat sources. Maintain adequate clearance around the unit for airflow.
- The ambient operating temperature range is -10°C to 50°C.
4.2 전기 연결
모든 전기 연결은 해당 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- PV 입력 연결: Connect your solar panel arrays to the PV Interface ports. Ensure correct polarity (+/-) and that the PV input voltage and current are within the system's specifications (Max PV input power: 8500W, MPPT tracking range: 60-500VDC, Max PV input voltage: 500VDC, Max PV input current: 27A).
- AC 입력 연결: Connect the utility grid power to the AC Input port.
- AC 출력 연결: Connect your household loads or distribution panel to the AC Output ports.
- 접지: 시스템이 올바르게 접지되었는지 확인하십시오.
4.3 초기 전원 켜기
모든 연결이 안전하게 이루어지고 확인된 후:
- 켜다 ON/OFF Battery Switch.
- 켜다 ON/OFF Inverter Switch.
- If connecting to the grid, turn on the AC IN ON/OFF Switch.
- If connecting solar panels, turn on the PV ON/OFF Switches.
- 마지막으로 전원을 켜세요 AC OUT ON/OFF Switch to supply power to your loads.
5. 운영
The DATOUBOSS system features a color touch LCD display for intuitive monitoring and control.
5.1 터치스크린 인터페이스
- 모니터링: The display allows you to monitor real-time information such as PV input power, grid status, battery charge level, and power output to loads.
- 항해: Swipe or tap on the screen to navigate between different pages and view detailed system information.
- 설정: Access system settings for configuration, including 'Battery Setting', 'System Work Mode', 'Grid Setting', 'Charge Setting', 'Basic Setting', 'Advanced Function', and 'Device Info'. Refer to the detailed electronic manual for specific setting adjustments.
5.2개의 표시등
- 실행 : Indicates normal system operation.
- ALM(알람): Illuminates when a warning or error condition is detected. Check the LCD display for specific codes.
- RESET : Used to reset the system in case of certain errors or for troubleshooting.
- 배터리 표시기: Provides a quick visual reference of the battery's state of charge.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your DATOUBOSS Home Energy Storage System.
- 청소: 부드럽고 마른 천으로 기기 외부를 정기적으로 청소하세요. 액체 세제나 용제는 사용하지 마세요. 환기구에 먼지나 이물질이 없는지 확인하세요.
- 연결 확인: Annually, or as needed, inspect all electrical connections (PV, AC input, AC output) to ensure they are tight and free from corrosion.
- 환경 조건: Monitor the ambient temperature and humidity to ensure they remain within the specified operating ranges. Extreme conditions can affect performance and lifespan.
- 소프트웨어 업데이트: Check for any available firmware updates through the manufacturer's support channels to ensure optimal system performance and feature enhancements.
7. 문제 해결
The system's touch screen display will show warning or error codes if an issue arises. Refer to the detailed electronic manual for a comprehensive list of error codes and their solutions. Below are general troubleshooting steps for common issues.
7.1 일반적인 문제 및 해결 방법
- 전원 출력 없음:
- Check if the AC OUT ON/OFF Switch is in the 'ON' position.
- Verify that the ON/OFF Inverter Switch and ON/OFF Battery Switch are 'ON'.
- Check the battery charge level on the display. If low, the system may not output power.
- Inspect circuit breakers for any trips.
- 배터리가 충전되지 않음:
- Ensure PV ON/OFF Switches are 'ON' and solar panels are receiving sunlight.
- Verify AC IN ON/OFF Switch is 'ON' if charging from the grid.
- PV 입력 볼륨 확인tage and current on the display to ensure solar panels are producing power.
- Look for any alarm codes on the display that might indicate a charging fault.
- System Alarm (ALM light on):
- Check the touch screen display for the specific error or warning code.
- Consult the electronic manual for the meaning of the code and recommended actions.
- If the issue persists after following manual instructions, contact customer support.
If you are unable to resolve an issue, do not attempt further repairs. Contact DATOUBOSS professional technicians for assistance.
8. 사양
The following table details the technical specifications of the DATOUBOSS FBM-JC-6232-EU-3 Home Energy Storage System.
| 특징 | 사양 |
|---|---|
| 모델 번호 | FBM-JC-6232-EU-3 |
| 배터리 유형 | 리튬철인산(LiFePO4) |
| 배터리 용량 | 628Ah (32.15kWh) |
| 공칭 권tage | 51.2V |
| Hybrid Inverter Power | 6200W(48V) |
| PV Inverter Rated Output Power | 6500와트 |
| 최대 PV 입력 전력 | 8500와트 |
| MPPT 추적 범위 | 60-500VDC |
| 최대 PV 입력 Voltage | 500VDC |
| 최대 PV 입력 전류 | 27A |
| 최대 충전 전류 | 120A |
| 출력 볼륨tage | 220/230/240VAC ±5% |
| 출력 주파수 | 50 / 60Hz ± 0.1 % |
| 파형 | 순수한 사인 웨이브 |
| 작동 온도 | -10°C ~ 50°C |
| 소음 수준 | <50dB (XNUMXdB) |
| 제품 크기(L x W x H) | 21.65 x 21.3 x 36.54인치(550 x 541 x 928mm) |
| 품목 무게 | 526파운드(239kg) |
| 통신 인터페이스 | RS232, RS485 |
9. 보증 및 지원
DATOUBOSS stands behind the quality of its products. This all-in-one home energy storage system comes with a 5년 보증.
9.1 고객 서비스
For any product-related questions, technical assistance, or warranty claims, please contact DATOUBOSS customer service. Our professional customer service team is available 24 hours a day to provide friendly and patient support.
- 연락 방법: Please reach out via the Amazon messaging system or through the contact information provided with your purchase.
9.2 Multilingual User Manuals
An English printed user manual is included in the product packaging. If you require a manual in a different language or an electronic version, please contact us via Amazon messaging. We can provide electronic manuals for various countries upon request.