소개
This manual provides comprehensive instructions for the Vipbear Smart Toilet Bidet, Model OPT08. It covers essential information for safe installation, efficient operation, and proper maintenance of your smart toilet. Key features include a foot sensor flush, a comfortable heated seat, various cleaning modes, and a dedicated child mode. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
중요 참고 사항: This non-tank smart toilet requires a minimum household water pressure of 1.5 MPa (equivalent to filling a 5L container in 15 seconds) for consistent, powerful flushing. Low water pressure may result in incomplete waste removal.
중요한 안전 정보
- 전기 연결 시 적절한 접지를 확보하세요.
- 제품을 물에 담그거나 전기 부품에 직접 물을 뿌리지 마십시오.
- Keep children away from the toilet during operation, unless using the dedicated child mode.
- 유지관리나 청소를 하기 전에 전원을 분리하세요.
- 변기 표면에 연마성 세제나 독한 화학 약품을 사용하지 마십시오.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 스마트 화장실 유닛
- 원격 제어
- 플랜지 링
- 물 밸브
- 파워 오우tage Flushing Battery
- 사용 설명서(본 문서)
- 설치 하드웨어
제품 끝view
The Vipbear Smart Toilet Bidet combines modern design with advanced functionality for an enhanced bathroom experience.
그림 1: 이상view of the 4 Smart Flushing Modes.
Figure 2: Illustration of the Versatile Cleaning Modes.
Figure 3: Instant Heating Seat and Warm Air Dryer features.
Figure 4: Energy-saving and Child Mode functionalities.
설정 및 설치
Installation of the Vipbear Smart Toilet Bidet is designed to be straightforward. For detailed visual guidance, please refer to the installation video below and the dimension diagram.
Video 1: Installation Guide for Vipbear Smart Toilet OPT08. This video demonstrates the steps involved in setting up your smart toilet, including connecting water lines and securing the unit.
Figure 5: Product Dimensions and Quick Installation Components. Refer to this diagram for precise measurements and to identify all parts for installation.
설치 전 체크리스트:
- Confirm minimum water pressure of 1.5 MPa.
- Ensure a grounded electrical outlet is available near the installation site.
- Verify rough-in dimensions match your bathroom setup (refer to Figure 5).
기본 설치 단계:
- Prepare the floor flange and ensure the area is clean.
- Connect the water supply line to the toilet unit.
- Carefully place the toilet over the flange and secure it.
- 전원 코드를 접지된 콘센트에 연결하십시오.
- Test for leaks and proper flushing.
작동 지침
Flushing Modes:
The Vipbear Smart Toilet offers multiple convenient flushing options:
- Remote Flush: Use the provided remote control to activate flushing.
- Side Button Flush: A button located on the side of the toilet provides manual flushing.
- 시트에서 내린 후 자동 물내림 기능: The toilet automatically flushes a small amount of water when you stand up from the seat.
- 발 감지식 물내림 기능: Gently tap your foot near the designated sensor area at the base of the toilet to activate flushing.
Video 2: Demonstration of the Foot Sensor Flush feature. This video illustrates how to activate the hands-free foot sensor flush.
다양한 청소 모드:
Utilize the remote control to select your preferred cleaning function:
- 후면 세척: Provides a thorough posterior cleansing.
- 여성용 세척제: Offers a gentle and targeted wash for feminine hygiene.
- 자동 청소: A pre-programmed cleaning cycle.
- Atomized Cleaning: A fine mist spray for a softer cleansing experience.
Heated Seat and Warm Air Dryer:
The heated seat provides comfort, especially in colder environments. Adjust the temperature using the remote control to one of the following settings: Normal Temperature, 93°F, 99°F, or 104°F. After washing, the warm air dryer gently dries, enhancing comfort.
Video 3: Smart Toilet with Heated Seat and Remote Control. This video demonstrates the heated seat function and how to operate various features using the remote control.
어린이 모드:
Activate the dedicated child mode for a gentle and comfortable experience for younger users. This mode adjusts water pressure and temperature to suit children, aiding in independent toilet use and potty training.
Night Light and Soft-Close Features:
The gentle night light illuminates the bowl, providing visibility without disrupting sleep. The quiet soft-close lid and seat prevent slamming, ensuring a peaceful environment.
Figure 6: Night Light and Soft-Close Lid/Seat for minimal disruption.
유지
자체 세척 노즐:
The spray rod is designed for easy cleaning and self-maintenance. The nozzle performs a self-cleaning cycle before and after each use to ensure hygiene.
일반 청소:
- 외부 표면은 부드러운 천으로 정기적으로 닦아주세요.amp 천과 순하고 마모성이 없는 세척제를 사용하세요.
- 강한 화학 물질, 연마 패드 또는 용제를 사용하지 마십시오. 이러한 것들은 마감재를 손상시킬 수 있습니다.
- For thorough cleaning, disconnect the power supply.
문제 해결
- Incomplete Flushing: Ensure your household water pressure meets the minimum requirement of 1.5 MPa. Check for any obstructions in the water supply line.
- 전원 없음: Verify the power cord is securely plugged into a grounded outlet. Check your circuit breaker.
- 파워 오우tage: A built-in backup battery ensures flushing functionality even when the main power is out.
- 리모콘이 응답하지 않음: Check the remote control batteries and ensure there are no obstructions between the remote and the toilet unit.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 옵션08 |
| 상표 | Vipbear |
| 색상 | 알파인 화이트 |
| 제품 크기(D x W x H) | 26.7인치 x 15.7인치 x 18인치 |
| 재료 | 세라믹 |
| 좌석 소재 | 폴리프로필렌(PP) |
| 품목 무게 | 77.2 파운드 |
| 설치 방법 | 바닥 장착 |
| 플러싱 시스템 | Dual-Flush (Siphon Jet + Vortex) |
| 수압 요구 사항 | 최소 1.5MPa |
| Heated Seat Temperatures | Normal, 93°F, 99°F, 104°F |
| 한국어: | 199581104471 |
보증 정보
The Vipbear Smart Toilet Bidet, Model OPT08, comes with a standard manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Vipbear customer support directly.
고객 지원
If you encounter any issues, have questions about your Vipbear Smart Toilet Bidet, or require technical assistance, please contact Vipbear customer support. Refer to the product packaging or the official Vipbear web최신 연락처 정보는 사이트에서 확인하세요.
온라인 리소스: For additional support, FAQs, and product registration, visit the official Vipbear web대지.