1. 소개 및 이상view
This manual provides essential information for the safe and efficient operation of your SEESII 1HP Submersible Water Pump. Designed for high-volume water removal, this pump is ideal for draining swimming pools, hot tubs, flooded basements, ponds, and garden areas. It features a powerful 1HP motor, delivering up to 4755 gallons per hour (GPH) with a maximum lift height of 36 feet. The integrated anti-clogging filter net and included 23ft hose kit ensure convenient and reliable performance.
2. 안전 정보
경고: 본 제품을 사용하기 전에 모든 안전 경고 및 지침을 읽으십시오. 경고 및 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상이 발생할 수 있습니다.
- 전기 안전: 전원 공급 장치가 펌프의 용량과 일치하는지 확인하십시오.tage (120V). Always connect to a grounded outlet. Do not operate with a damaged power cord or plug.
- 수중에서만 사용 가능: This pump is designed for submersible use in water. Do not operate it dry.
- 액체 호환성: Use only for pumping clean or lightly dirty water. Do not pump flammable, corrosive, or explosive liquids.
- 개인 안전: Keep hands, feet, and clothing clear of the pump's intake and discharge openings during operation.
- 어린이와 애완동물: Keep children and pets away from the pump and the area being drained.
- 온도 제한: Do not use the pump in water exceeding 95°F (35°C).
3. 패키지 내용
패키지를 열 때 모든 품목이 들어 있고 손상되지 않았는지 확인하세요.
- SEESII 1HP Submersible Water Pump
- 23ft Lay-flat Hose
- Hose Adapters (various sizes for compatibility)
- Debris-Filtering Net
- 사용 설명서 (본 문서)
Image: Complete kit showing the submersible water pump, 23ft lay-flat hose, hose adapters, and debris-filtering net.
4. 사양
| 상표 | 시시 |
| 모델 번호 | SEESII BDP9001 |
| 전원 | 코드식 전기 |
| 마력 | 1마력 |
| 최대 유량 | 4755GPH(분당 79.25갤런) |
| 최대 리프팅 높이 | 36 피트 |
| 권tage | 120 볼트 |
| 재료 | 폴리프로필렌(PP) |
| 제품 크기(L x W x H) | 6.18인치 x 6.18인치 x 12.24인치 |
| 품목 무게 | 9.2 파운드 |
| Minimum Pit Diameter | 8인치 |
| 작동을 위한 최소 수위 | 2 3/8" (approx. 60 mm) above intake |
Image: The compact size of the pump, with dimensions of 12.24 inches in height and 6.18 inches in base width.
Image: Diagram illustrating the recommended minimum pit diameter of 8 inches and the required water level for pump operation.
5. 설정
- Attach Hose Adapters: Select the appropriate hose adapter for your application. The pump includes various sizes (1", 1-1/4", 1-1/2" NPT) to ensure compatibility with standard hoses. Securely screw the chosen adapter onto the pump's discharge outlet.
- 호스를 연결하십시오: Attach the provided 23ft lay-flat hose to the adapter. Use a hose clamp (not included, but recommended for a secure fit) to prevent leaks, especially with high-pressure discharge.
- Install Debris-Filtering Net: Place the debris-filtering net around the pump's intake area. This net helps prevent larger debris like leaves and hair from entering the pump, reducing the risk of clogging. Secure it firmly.
- 펌프 위치: Place the pump in the area to be drained. Ensure the pump is stable and upright. The water level must be at least 2 3/8 inches (approximately 60 mm) above the pump's intake for proper operation. If using in a pit, ensure the pit has a minimum diameter of 8 inches.
- Route the Discharge Hose: Direct the discharge hose to a suitable drainage area, ensuring the water will not cause damage or re-enter the area being drained. The pump has a 25ft power cord, allowing for flexible placement without immediate need for extension cords.
Image: Illustration of different hose adapter configurations for flexible drainage options.
Image: The debris filter net attached to the pump, demonstrating its function in preventing clogging from leaves, hair, and other small particles.
Image: A user connecting the 23ft lay-flat hose to the pump, ready for operation.
6. 운영
- 펌프를 담그십시오: Carefully lower the pump into the water. Ensure it is fully submerged and resting on a flat, stable surface. The water level must cover the intake for the pump to operate effectively.
- 전원에 연결: Plug the 25ft power cord into a grounded 120V electrical outlet. The pump will begin operating immediately.
- 배수 모니터링: Observe the water flow from the discharge hose. The pump is designed for continuous operation until the water level drops below its intake.
- Automatic Shut-off (if applicable): This model does not feature an automatic float switch. Monitor the water level manually to prevent dry running.
- 전원 분리: Once the desired water level is reached or the area is drained, unplug the pump from the power outlet.
- 펌프 제거: Carefully lift the pump out of the water using its handle. Allow any remaining water to drain from the pump and hose.
Image: User plugging in the pump's 25ft power cord for pool cleaning, highlighting its 'Plug & Play' convenience.
Image: The pump actively draining water, demonstrating its 4755 GPH massive flow capacity.
Image: The pump effectively lifting water 36 feet vertically, suitable for deep pits or sloped terrain.
Image: The pump's ability to drain water down to just 13/16 of an inch, minimizing residual water.
Video: Official SEESII video demonstrating the 4755GPH Submersible Water Pump in action with its 23ft hose kit, showcasing its ease of use and powerful water removal capabilities.
7. 유지관리
Regular maintenance ensures the longevity and optimal performance of your SEESII Submersible Water Pump.
- 깨끗한 필터 네트: After each use, especially when pumping dirty water, remove and clean the debris-filtering net. Rinse off any accumulated debris, leaves, or hair.
- Inspect Pump Intake: Periodically check the pump's intake area for any blockages or foreign objects that may have bypassed the filter net. Clear any obstructions carefully.
- 호스와 어댑터를 검사하세요: Check the hose for kinks, tears, or leaks. Ensure all adapters are securely attached and free from damage.
- 전원 코드 검사: Examine the power cord for any cuts, fraying, or damage. Do not use the pump if the cord is compromised.
- 저장: When not in use, clean the pump thoroughly, drain all water, and store it in a dry, frost-free location.
Image: Visual comparison highlighting how the included filter bag ensures smoother and steadier drainage by preventing debris from entering the pump.
8. 문제 해결
If you encounter issues with your SEESII Submersible Water Pump, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | 전원 공급이 없습니다 손상된 전원 코드/플러그 모터 과열 | 전원 콘센트와 회로 차단기를 확인하세요. 코드에 손상이 있는지 검사하고, 필요한 경우 교체하세요. Unplug, allow to cool, then restart. |
| 물 흐름이 적거나 흐름이 없음 | Clogged intake/filter net 배출 호스가 꼬이거나 막혔습니다. 불충분한 수위 에어록 | Clean filter net and intake. Clear hose of obstructions. Ensure water level is above pump intake. Lift and re-submerge pump to release trapped air. |
| 펌프는 작동하지만 물이 배출되지 않습니다. | 에어록 Discharge hose not connected properly 수위가 너무 낮습니다 | Lift and re-submerge pump. Ensure hose is securely attached to adapter. Ensure water level is above pump intake. |
| 펌프가 빠르게 켜졌다 꺼졌다를 반복합니다. | Water level fluctuating near intake | Ensure pump is on a stable, flat surface. If water level is very low, manual operation may be required. |
If troubleshooting steps do not resolve the issue, please contact SEESII customer support.
9. 보증 및 지원
Your SEESII 1HP Submersible Water Pump is backed by a 3년 보증, ensuring peace of mind regarding its performance and reliability.
SEESII is committed to providing excellent customer service. We offer 평생 지원 ~와 함께 24/7 expert help available for any installation, repair, or troubleshooting assistance you may require.
For support, please refer to the contact information provided on the product packaging or visit the official Seesii web대지.
Image: Dedicated customer support team ready to assist with any product inquiries or issues.