DATOUBOSS Hybrid Solar Inverter 1800W 12V Pure Sine Wave

1. 서론

This manual provides essential information for the safe and efficient operation of your DATOUBOSS Hybrid Solar Inverter 1800W 12V Pure Sine Wave. This advanced inverter is designed to provide clean and stable electricity, protecting sensitive equipment. It is ideal for various off-grid applications such as RVs, camping, home backup systems, and remote cabins. The inverter converts 12V DC power from batteries or solar panels into 230V AC power for household appliances.

적절한 기능과 안전을 보장하기 위해 설치 및 사용 전에 이 설명서를 자세히 읽어주세요.

2. 안전 지침

경고: 이러한 안전 지침을 따르지 않을 경우 감전, 화재, 심각한 부상 또는 사망이 발생할 수 있습니다.

• 설치 환경: Install the inverter in a dry, well-ventilated area, away from direct sunlight, heat sources, and flammable materials. The inverter is not waterproof and must be used in indoor, waterproof environments.
• 전기 연결: All electrical connections must be performed by qualified personnel in accordance with local electrical codes and regulations. Ensure all cables are correctly sized and securely connected.
• 배터리 안전: Work with batteries carefully. Wear eye protection and protective clothing. Do not short-circuit battery terminals. Ensure proper ventilation when charging lead-acid batteries.
• 접지: The inverter must be properly grounded to prevent electric shock.
• 단절: Before performing any maintenance or cleaning, disconnect all power sources (solar, battery, AC input) from the inverter.
• 어린이들: Keep the inverter and its components out of reach of children.
• 통풍: 인버터 주변의 공기 순환이 원활하도록 하여 과열을 방지하십시오. 통풍구를 막지 마십시오.

3. 제품 특징

• 순수 사인파 출력: Provides clean and stable AC power, suitable for sensitive electronics and appliances.
• 통합 MPPT 태양광 충전 컨트롤러: Maximizes solar power harvesting by continuously optimizing the operating point of solar panels, increasing charging efficiency by up to 30%.
• 직관적인 LCD 디스플레이: 볼륨의 실시간 모니터링tage, power, battery status, and operating mode. Features a user-friendly menu for quick setup and convenient use.
• Comprehensive BMS Protection System: Built-in safeguards against short circuit, overcurrent, overvoltag전자, 언더볼tage, overheating, and overload, ensuring maximum safety for the inverter and connected devices.
• 배터리 호환성: Supports various battery types including lead-acid, AGM, gel, and lithium (LiFePO4) batteries.
• 다양한 응용 프로그램: Ideal for off-grid systems in RVs, vans, boats, garden houses, cabins, and as a reliable backup power source for essential appliances like refrigerators, coffee makers, lighting, TVs, fans, and power tools.
• 지능형 냉각 팬: Features intelligent variable speed fans that adjust speed based on ambient temperature and environmental conditions to maintain optimal performance and extend lifespan.

4. 사양

이미지: 이상view of the DATOUBOSS Hybrid Solar Inverter with its main features and specifications highlighted.

Image: Physical dimensions of the inverter, showing height, width, and depth in millimeters.

5. 설정 및 설치

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Refer to the diagrams below for connection points.

이미지: 앞면과 측면 views of the inverter, highlighting the LCD display, LED indicators, function buttons, and communication ports (RS485-1, RS485-2 for BMS).

이미지: 상세 view of the inverter's connection terminals, including PV input, battery terminals, AC input, AC output, and grounding point.

5.1. 인버터 장착

• Choose a vertical mounting surface that can support the inverter's weight (4 kg).
• Ensure sufficient clearance around the inverter for proper ventilation (at least 15 cm on all sides).
• Mount the inverter indoors in a dry, waterproof environment. Avoid areas with high humidity, dust, or corrosive gases.

5.2. 전기 연결

Image: A comprehensive system diagram illustrating how solar panels, generator, mains power, and a battery connect to the inverter, which then powers various household appliances.

Image: A detailed diagram showing the specific terminals for battery, mains power, and solar panel connections, along with RS485 communication interfaces.

1. 배터리 연결:
   • Connect the 12V battery bank (recommended 100/200/300Ah) to the battery terminals on the inverter. Ensure correct polarity (+ to + and - to -).
   • 배터리 용량tage range should be 10.5-16Vdc.
2. Solar Panel Connection (PV Input):
   • Connect your solar panels to the Photovoltaic (PV) input connection socket.
   • It is recommended to connect photovoltaic modules in series to increase the voltage.
   • Ensure the solar voltage range (Vmp) is 30-240Vdc, with a maximum open-circuit voltage (Voc) of 300Vdc. Max PV input current is 15A.
3. AC 입력 연결:
   • Connect the AC mains power or generator to the AC input terminal.
   • The inverter accepts 230VAC, 50/60Hz.
4. AC 출력 연결:
   • 가정용 가전제품을 AC 출력 단자에 연결하십시오.
   • The inverter provides 230VAC, 50/60Hz pure sine wave output.
5. 통신 포트(선택 사항):
   • RS485-1: External Communication Interface (e.g., for WiFi module).
   • RS485-2: Communication Interface for BMS (Battery Management System).
6. 접지: Connect the inverter to a reliable earth ground using the designated grounding terminal.

5.3. 초기 파워업

• Once all connections are secure, switch on the battery breaker first.
• Then, switch on the solar panel breaker (if applicable).
• Finally, switch on the AC input breaker (if applicable) and the inverter's main power switch.
• Observe the LCD display and LED indicators for normal operation.

6. 사용 설명서

Image: Close-up of the inverter's LCD display, LED indicators (AC, INV, CHG, FAULT), and function buttons (DOWN, ESC, ENTER, UP).

Image: Visual representation of the inverter's four charging modes (Mains priority, Solar priority, Mixed loading, Solar only) and three discharge modes (SUB Solar First, USB Utility First, SBU Priority).

6.1. LCD 디스플레이 및 버튼

The LCD display provides real-time information about the inverter's status. Use the function buttons to navigate menus and adjust settings.

• LCD 디스플레이: Shows input/output voltage, power, battery charge level, operating mode, and error codes.
• LED 표시등:
  • 교류: Indicates AC input status.
  • 인도: 인버터 작동 상태를 나타냅니다.
  • CHG: 배터리 충전 상태를 나타냅니다.
  • 결점: 오류 또는 결함 상태를 나타냅니다.
• 기능 버튼:
  • 내려가는: 메뉴에서 아래로 이동하거나 값을 감소시킵니다.
  • 키보드: Exits current menu or cancels an action.
  • 시작하다: 선택을 확인하거나 메뉴로 들어갑니다.
  • 쪽으로: 메뉴에서 위로 이동하거나 값을 증가시킵니다.

6.2. 작동 모드

The inverter offers various charging and discharge modes to optimize energy use based on your preferences and available power sources.

충전 모드 :

1. 주요 우선순위: The inverter prioritizes charging from the AC mains power. Solar power is used if mains power is unavailable or insufficient.
2. 태양광 우선 순위: The inverter prioritizes charging from solar panels. AC mains power is used only if solar power is insufficient.
3. Mixed Loading: Combines solar and AC mains power for charging, optimizing efficiency.
4. 태양광 전용: The inverter charges batteries exclusively from solar panels.

방전 모드:

1. SUB Solar First (기본값): Prioritizes solar power for loads, then battery, then utility.
2. USB 유틸리티 먼저: Prioritizes utility power for loads, then solar, then battery.
3. SBU 우선순위: Prioritizes solar power for loads, then utility, then battery.

Refer to the inverter's LCD menu for detailed settings and configuration of these modes.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your DATOUBOSS Hybrid Solar Inverter.

Image: Close-up of the inverter's intelligent variable speed fans, which adjust based on temperature to ensure efficient cooling.

• 청소: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners or solvents.
• 연결 확인: Regularly inspect all electrical connections (battery, solar, AC input/output) for tightness and corrosion. Loose connections can cause overheating and damage.
• 통풍: Ensure the intelligent cooling fans are operating correctly and that there is unobstructed airflow around the unit.
• 환경 조건: Verify that the inverter is operating within its specified temperature and humidity ranges.
• 배터리 검사: 납축전지를 사용하는 경우, 배터리 제조업체의 지침에 따라 전해액 수위와 단자 상태를 점검하십시오.

유지관리를 수행하기 전에 항상 모든 전원을 분리하세요.

8. 문제 해결

The DATOUBOSS Hybrid Solar Inverter is equipped with a comprehensive protection system to ensure safe operation. If an issue occurs, the inverter's LCD display may show an error code, and the FAULT LED will illuminate.

Image: Visual representation of the inverter's complete protection features, including overvoltag전자, 낮은 볼륨tage, short circuit, overload, overheating, and reverse polarity protection.

Image: Another diagram detailing the inverter's comprehensive protection, including short circuit, overload, over current, high voltag전자, 권 이상tag예, 온도 과다, 부피 부족tag그리고 과충전 방지 기능이 있습니다.

일반적인 문제 및 해결책:

If you encounter persistent issues or error codes not listed, please contact customer support.

9. 보증 및 지원

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. DATOUBOSS is committed to providing reliable products and customer satisfaction.

고객 지원:

If you have any questions, require technical assistance, or need to report an issue, please contact DATOUBOSS customer support through the following channels:

• 온라인: Visit the official DATOUBOSS web지원 자료 및 문의 양식을 위한 사이트입니다.
• 이메일: Refer to your product packaging or purchase invoice for the customer service email address.
• 소매업체: 제품을 구입한 판매점에 문의하세요.

Please have your product model number (DT-1218-A-EU) and purchase date ready when contacting support.