1. 서론
This manual provides essential information for the safe and efficient operation of your PowMr 5200W Hybrid Solar Inverter, model POW-Sunsmart SP5.2. This device integrates a 5200W pure sine wave inverter, a 100A MPPT solar charge controller, and a 6000W PV input capability. It is designed for various applications including home, office, RV, boat, and off-grid systems, supporting both battery-connected and batteryless operations.
2. 안전 정보
설치 및 작동 전에 모든 지침과 경고를 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
- 설치는 자격을 갖춘 인력이 수행해야 합니다.
- Ensure all power sources (solar, utility, battery) are disconnected before installation or maintenance.
- 인버터를 분해하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
- 인버터의 접지가 적절히 되어 있는지 확인하세요.
- Avoid exposing the inverter to rain, snow, or liquids.
- Operate the inverter within its specified voltage 및 전류 범위.
3. 설정 및 설치
3.1개 제품 이상view
The PowMr 5200W Hybrid Solar Inverter combines multiple functions into one unit, including a pure sine wave inverter, MPPT solar charge controller, and battery charger. It features a clear LCD display for monitoring and configuration.
이미지: 앞면 view of the PowMr 5200W Hybrid Solar Inverter, showing the LCD display and branding.
3.2 결선도
Refer to the following diagram for proper connection of solar panels, battery, AC input (utility/generator), and AC output (home loads).
Image: Detailed connection diagram illustrating how to connect solar panels, mains power/generator, battery, and home loads to the inverter.
3.3 터미널 연결
Identify the various ports and terminals on the inverter for correct wiring.
Image: Diagram showing the AC input, AC output, PV input, dry contact, battery port, ON/OFF switch, current sharing port, RS485, USB, and cooling fans.
중요한: Ensure all connections are secure and correctly polarized. Use appropriate wire gauges for all connections.
3.4 병렬 작업
The inverter supports parallel operation for increased power output and multi-phase configurations. Up to 6 units can be connected in parallel.
- 단일 위상 : Up to 2 inverters for 10000W output.
- 세 단계: Up to 3 inverters for 15000W output.
- Split Phase: Up to 6 inverters for 30000W output.
Image: Diagrams illustrating single-phase, three-phase, and split-phase parallel connection setups for multiple inverters.
Video: This video demonstrates how to configure two SP5K inverters for a parallel split-phase 240V output, providing a visual guide for advanced setups.
Video: This video explains the support for single-phase, split-phase, and three-phase parallel configurations, detailing how to expand the system's capacity.
4. 사용 설명서
4.1 LCD 디스플레이 및 컨트롤
The inverter features an LCD HD display for monitoring system status and configuring settings. Use the control buttons to navigate menus and adjust parameters.
Image: Close-up of the LCD display showing various indicators like battery capacity, load percentage, utility, generator, solar power, and home appliances. It also highlights the control buttons: Enter/Exit Settings, Option Increase, Option Decrease, and OK/Enter Options.
4.2 충전 모드
The inverter offers four distinct charging modes to optimize battery charging based on available power sources.
- 솔라 퍼스트: Prioritizes solar power for charging. Grid charging starts only if PV fails.
- 주요 내용 우선: Prioritizes mains power for charging. PV charging starts only if mains fails.
- 하이브리드 충전: Prioritizes PV MPPT charging, supplementing with mains power if PV energy is insufficient.
- 태양광 발전만 사용: Only PV charging is initiated; no mains charging.
Image: Visual representation of the four charging modes: Solar First, Utility First, Solar and Utility (Hybrid), and Only Solar, showing power flow from solar, utility, and battery.
4.3가지 출력 모드
Select from four output modes to manage power delivery to your loads.
- 솔라 퍼스트: Maximizes the use of green solar energy. Suitable for regions with stable power grids.
- 주요 내용 우선: Switches to inverter power supply only when Mains power has failed (UPS function).
- 인버터 우선: Switches to Mains power supply only when the battery is under-voltage. Maximizes DC energy use.
- 하이브리드 출력 및 계통 연결: In utility bypass state, if no battery is connected or battery is full, load is supplied by PV and utility. Surplus PV can be fed back to the grid if grid connection is enabled.
Image: Visual representation of the four output modes: Solar First, Mains First, Inverter First, and Hybrid Output with Grid Connection, showing power flow to home loads.
4.4 Battery Compatibility and Batteryless Mode
The inverter is compatible with various 48V battery types and supports operation without a battery.
- 호환 가능한 배터리 유형: AGM, Gel, Lead-acid, Lithium, LiFePO4, and User-Defined.
- Batteryless Mode: Can power loads directly from PV or AC grid without a connected battery.
- 리튬 배터리 활성화: Features a dual activation function to wake up dormant Li-ion batteries using mains or PV power.
Image: Diagram showing various battery types (FLD, SLD, AGM, GEL, LI, USER) compatible with the inverter and highlighting the batteryless mode feature.
Image: Another visual showing compatibility with GEL, AGM, Flooded, LiFePO4, Lithium, and User-Defined 48V battery types, emphasizing the batteryless mode.
4.5 ECO Mode and Time-of-Use Programming
The inverter includes an ECO mode for energy saving and supports time-of-use programming.
- 에코 모드: If the load is less than 50W, the inverter delays for 5 minutes then shuts off. It restarts output when the load increases.
- Time-of-Use Programming: Allows for 24/7 programming of off-peak charging and discharging to optimize energy costs.
Image: Graph illustrating peak-valley electricity tariffs and how sectioned charging and discharging functions can be programmed to store excess solar power for nighttime use, reducing electricity expenses.
5. 유지관리
정기적인 유지관리는 인버터의 수명과 최적의 성능을 보장합니다.
- Keep the inverter clean and free from dust. The unit features a dust-proof cover.
- Ensure proper ventilation around the inverter. The cooling fans should not be obstructed.
- 모든 전기 연결부의 조임 상태와 부식 징후를 주기적으로 점검하세요.
- Monitor the LCD display for any error codes or warnings.
Image: Highlights key features of the inverter including the LCD HD Display, MPPT Controller, Pure Sine Wave output, Dust-Proof Cover, and Cooling Fan system.
6. 문제 해결
This section provides guidance for common issues. For complex problems, contact customer support.
6.1 Error Codes and Fault Reference
Scan the QR code below for a detailed fault code reference guide.
Image: Displays two QR codes. The left QR code links to the User Guide, and the right QR code links to the Fault Code Reference for the POW-SunSmart SP5K inverter.
사용자 가이드: https://qrco.de/bfKt8J
Fault Code Reference: https://qrco.de/bfKt3n
6.2 보호 기능
The inverter is equipped with comprehensive 360° protection features:
- Mains input over/under voltag전자 보호
- Battery over/low voltag전자 보호
- 부하 출력 단락 보호
- 과부하 보호
- 과열 보호
- PV 역극성 보호
- PV 야간 역전류 보호
- CAN communication loss protection
Image: Diagram highlighting the 360° protection features of the inverter, including various voltage, current, temperature, and communication safeguards.
7. 사양
| 특징 | 사양 |
|---|---|
| 정격 출력 전력 | 5200와트 |
| 최대 PV 개방 회로 Voltage | 500Vdc |
| MPPT 권tag및 범위 | 120 ~ 450Vdc |
| 최대 PV 입력 전력 | 6000와트 |
| 최대 PV 입력 전류 | 22A |
| Max Charger Current (settable) | 100A |
| 정격 AC 입력 Voltage | 110/120Vac |
| AC 입력 볼륨tag및 범위 | 90Vac~140Vac ±2% |
| 빈도 | 50Hz/60Hz |
| 단계 | 120V (single phase), 120V/240V (split phase), 208V (2/3 phase) |
| 병렬 지원 | 최대 6개 유닛 |
| 통신 인터페이스 | CAN, USB, RS485, WiFi, GPRS |
| 치수(길이 x 너비 x 높이) | 13인치 길이 x 5인치 너비 x 17인치 높이 |
| 무게 | 30.8kg (14 파운드) |
| 전기 출력 파형 | 순수한 사인 웨이브 |
| 디스플레이 유형 | 액정표시장치 |
| Transition Time (Grid to Inverter) | <20ms |
8. 보증 및 지원
8.1 보증 정보
PowMr offers a 12개월 보증 서비스 본 제품에 대한 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
8.2 고객 지원
For any questions, technical assistance, or warranty inquiries, please contact PowMr customer support. You can also refer to the user guide and fault code reference via the QR codes provided in the Troubleshooting section.