TaskStar TP13UP 12V 13GPM Electric Diesel Transfer Pump Kit

중요한 안전 정보

• This transfer pump should ~ 아니다 be used for pumping water or high-flammability fuels such as gasoline, liquefied petroleum gas, or alcohol.
• After pumping, please turn off the pump power before closing the fuel nozzle.
• Single use duration should ~ 아니다 exceed 30 minutes to prevent overheating.
• Ensure all connections are tight to prevent leaks and maintain pressure.
• Always connect the pump directly to a 12V vehicle battery, ensuring correct polarity (positive to positive, negative to negative).

상자 안에 무엇이 들어있나요?

• 1 x Diesel Transfer Pump
• 1 x Fuel Nozzle
• 1 x 4 FT Inlet Hose
• 1 x 6.6 FT Outlet Hose
• 1 x 9.8 FT Battery Clip
• 1 x 사용자 설명서
• 1 x 필터
• 4 x 금속 호스 Clamps
• 3 x Metal Connectors

Image: All components included in the TaskStar TP13UP Diesel Transfer Pump Kit.

제품 끝view

The TaskStar TP13UP Electric Diesel Transfer Pump Kit is designed for efficient and safe transfer of diesel, kerosene, machine oil, and transformer oil. Its robust 12V motor ensures consistent performance across various temperatures.

Image: Demonstrates the pump's fast transfer rate, capable of emptying a 55-gallon drum in under 7 minutes.

With a flow rate of up to 13 gallons per minute (GPM), this pump significantly improves work efficiency. It can draw fuel from up to 9.8 feet away and pump it to a height of 26.2 feet, making it suitable for remote or high-position fueling tasks.

Image: Illustrates the pump's powerful suction and lift capabilities for various fueling scenarios.

The pump is portable and space-saving, featuring an easy-to-install base with pre-drilled holes for secure mounting. It includes an adjustable fuel nozzle for controlled flow and a mesh filter to prevent large particles from entering the pump, ensuring clean fuel flow.

Image: Shows compatibility with diesel, kerosene, machine oil, and transformer oil, while explicitly stating it is not for gasoline or water.

조립 및 설정

1. 호스를 연결하십시오: Attach the inlet (4 FT) and outlet (6.6 FT) hoses to the pump's designated 'IN' and 'OUT' ports using the provided metal hose clamp에스. 확인amp누출을 방지하기 위해 단단히 조여져 있습니다.
2. 필터 설치: Connect the mesh filter to the end of the inlet hose. Secure it with a metal hose clamp.
3. 연료 노즐을 부착하세요: Connect the adjustable fuel nozzle to the end of the outlet hose. Secure it with a metal hose clamp.
4. Mount Pump (Optional): Use the pre-drilled holes on the pump's base to securely mount it if desired.
5. 전원 연결: Attach the 9.8 FT battery clips to a 12V vehicle battery, ensuring correct polarity (red clip to positive terminal, black clip to negative terminal).

Image: Visual guide showing the three main steps for connecting the hoses, filter, nozzle, and power supply to the pump.

작동 지침

1. Position Hoses: Place the inlet hose with the filter into the fuel source (e.g., diesel drum). Insert the fuel nozzle into the receiving tank (e.g., tractor fuel tank).
2. 펌핑 시작: Ensure all connections are secure. Flip the power switch on the pump to the 'ON' position.
3. 제어 흐름: Use the adjustable fuel nozzle to control the flow rate. The nozzle can be locked for continuous pumping.
4. Monitor Transfer: Observe the fuel transfer. The transparent hoses allow for visual confirmation of fuel flow.
5. 펌프질 중지: Once the desired amount of fuel is transferred or the receiving tank is full, turn off the pump's power switch before removing the fuel nozzle.

Image: The pump being used to refuel agricultural equipment from a diesel drum.

Image: The pump in action, refueling a truck from a portable fuel container.

유지

• 필터 청소: Regularly inspect and clean the mesh filter to ensure optimal fuel flow and prevent pump damage.
• 호스 검사: Check hoses for any signs of wear, cracks, or damage before each use. Replace damaged hoses immediately.
• 적절한 보관: After use, disconnect the pump and hoses. Drain any remaining fuel. Store the pump in a dry, clean place away from direct sunlight and extreme temperatures.

문제 해결

• 펌프가 시동되지 않음: Check battery connections for secure contact and correct polarity. Ensure the battery has sufficient charge.
• Slow or No Flow: Inspect the mesh filter for clogs and clean if necessary. Check hoses for kinks or blockages. Ensure the inlet hose is fully submerged in the fuel source.
• 누출: Verify all hose clamps are tightened securely. Inspect hoses and connections for any damage.
• 과열: If the pump feels excessively hot, turn it off immediately and allow it to cool. Ensure continuous operation does not exceed 30 minutes.

제품 사양

보증 및 고객 지원

For any questions, concerns, or warranty inquiries regarding your TaskStar TP13UP Diesel Transfer Pump Kit, please refer to the contact information provided in your product packaging or visit the official TaskStar web고객 지원 사이트.