BLUETTI Charger 2 1200W Alternator and DC-DC Charger User Manual

1. 서론

The BLUETTI Charger 2 is a versatile 1200W alternator and DC-DC charger designed to efficiently power your portable power stations and solar generators. It features dual input capabilities, allowing charging from both your vehicle's alternator and solar panels. This device offers up to 13 times faster charging compared to a standard car cigarette lighter socket and includes emergency jump-start functionality for your vehicle's battery. It also incorporates advanced voltage monitoring to prevent car battery discharge.

Image: The BLUETTI Charger 2 main unit, a compact gray device with ventilation grilles.

2. 상자 안에 무엇이 들어있나요?

개봉 시 모든 구성품이 있는지, 그리고 양호한 상태인지 확인해 주십시오.

• BLUETTI Charger 2 (Alternator and DC-DC Charger)
• Car Battery Cable
• Power Station Cable Kit
• MC4 Input Cable
• Bidirectional Power Cable
• 75A 퓨즈
• 셀프 태핑 나사
• 사용자 설명서

Image: All components included with the BLUETTI Charger 2, laid out on a white surface.

3. 안전 정보

안전한 작동을 보장하고 손상을 방지하려면 다음 안전 지침을 읽고 준수하세요.

• Always wear personal protective equipment (PPE) such as gloves and safety glasses during installation.
• Avoid high temperatures, sharp edges, or friction points when routing cables.
• Ensure all screws and connections are tightened securely to prevent wear or loose connections.
• Turn off your vehicle or use the app to disable the Charger 2 before changing any cables.
• Ensure positive and negative terminals are correctly matched during connection.
• Use the BLUETTI DC input cable or a compatible one with a 60A circuit breaker for safety.
• Do not connect the Charger 2 ports to an AC outlet.
• When using a power station, follow its user manual for proper usage and storage.
• Switch off the vehicle before any electrical work.
• 제품을 물로 청소하지 마세요.
• 제품을 직접 분해하지 마십시오.
• Keep the product away from heat sources and high temperatures.
• Avoid use in areas with fire, explosive gases, or smoke.
• Store away from flammable or explosive materials.
• Do not use in saline or humid environments.
• Do not insert foreign objects into any ports or ventilation openings.
• 제품 안에 손가락이나 손을 넣지 마십시오.
• Avoid contact with metallic objects during operation.
• Ensure the product is completely dry before use.
• Use in a clean and well-ventilated area.
• Devices must be installed or serviced only by qualified technicians.
• Use only BLUETTI cables and accessories.
• Do not use if cables or outlets are damaged.
• Pull the plug, not the cable, when disconnecting.
• Immediately deactivate the circuit breaker in case of malfunction.
• Regularly check the product and its accessories for damage or deterioration. If the product shell is cracked, do not use it and contact BLUETTI support.
• Keep children, pets, insects, and other animals away from the product.
• This product is designed for exclusive use with IT/AV products.

4. 설정 및 설치

Follow these steps to install your BLUETTI Charger 2. For a visual guide, please refer to the installation video below.

4.1. 설치 준비

1. Ensure your vehicle is turned off and the battery is in good condition.
2. Verify your car battery is compatible with the Charger 2 (should be a standard 12V or 24V car battery, or two 12V batteries connected in series).
3. Confirm that the Charger 2's output voltage(15-56V)는 DC 입력 전압과 일치합니다.tage range of your power station. Use a compatible adapter if necessary.
4. Gather all necessary tools: gloves, screwdriver, wrench, utility knife, and zip ties.

4.2. 케이블 연결

1. Mount the Charger 2: Choose a suitable location in your vehicle (e.g., trunk, under a seat) and secure the Charger 2 using the provided self-tapping screws or zip ties.
2. Connect Input Cables to Charger 2:
   • Unscrew the base and lift the cover of the Charger 2.
   • Connect the red cable (BAT+) to the 'Input+' terminal and the black cable (BAT-) to the 'Input-' terminal on the Charger 2.
   • Tighten the screws using the provided hex key to secure the connections.
3. Connect MC4 Output Cable to Charger 2:
   • Connect the red MC4 cable (Output+) to the 'Output+' terminal and the black MC4 cable (Output-) to the 'Output-' terminal on the Charger 2.
   • 제공된 육각 렌치를 사용하여 나사를 조이세요.
4. Connect Charger 2 to Power Station: Connect the MC4 output cable from the Charger 2 to the DC input port (e.g., INPUT/MPPT) of your BLUETTI power station. Ensure the power station is compatible with the Charger 2's output voltage.
5. Connect Charger 2 to Car Battery:
   • Route the car battery cable from the Charger 2 through the vehicle's firewall to the engine compartment. Locate an existing entry point or create a new one if necessary, ensuring proper sealing.
   • Connect the OT terminals of the car battery cable to your vehicle's battery terminals. Connect the red cable (BAT+) to the positive (+) terminal and the black cable (BAT-) to the negative (-) terminal. Securely tighten the connections.

이미지: 상세 view of connecting the input cables to the Charger 2 unit.

Image: Step-by-step connection of the Charger 2 cables to the vehicle's battery terminals.

4.3. Activate the Charger 2

1. 차량의 엔진을 시동하십시오.
2. Activate the DC input circuit breaker (if included with your cable kit).
3. The Charger 2 will automatically detect the vehicle's alternator and begin charging. The green indicator light on the Charger 2 will flash rapidly during startup and then become solid green when charging successfully.

5. 사용 설명서

5.1. 발전소 충전하기

Once installed and activated, the BLUETTI Charger 2 will automatically charge your connected power station when the vehicle's engine is running. It utilizes both alternator and solar input (if solar panels are connected via the MC4 input cable) to provide up to 1200W of charging power.

5.2. Emergency Jump-Start

The Charger 2 can provide an emergency jump-start for your car battery. This function reverses the charging flow, using your BLUETTI power station or battery pack to deliver power to the car's starting battery. Refer to the BLUETTI app for specific settings and activation of this feature.

5.3. BLUETTI App Integration

The BLUETTI app allows for smart monitoring and control of your Charger 2. You can monitor input/output power, adjust charging voltage, and manage various settings directly from your smartphone.

1. Download the BLUETTI app from your device's app store (search for 'BLUETTI').
2. 스마트폰에서 Bluetooth가 활성화되어 있는지 확인하세요.
3. Open the app and follow the on-screen instructions to bind your Charger 2.
4. Within the app, you can select your specific BLUETTI power station model. The app will automatically set the optimal charging voltage 귀하의 장치에 대해.

Image: Screenshot of the BLUETTI mobile app interface, displaying energy monitoring and control options for connected devices.

6. 유지관리

정기적인 유지 관리는 BLUETTI Charger 2의 수명 연장과 최적의 성능을 보장합니다.

• 기기를 깨끗하게 유지하고 먼지와 이물질이 묻지 않도록 하십시오. 마른 부드러운 천으로 닦아주세요.
• Ensure the ventilation grilles are not obstructed to prevent overheating.
• Store the Charger 2 in a dry, well-ventilated area when not in use.
• Periodically check all cable connections for tightness and signs of wear or damage. Replace any damaged cables immediately.
• 장치를 극한의 온도나 직사광선에 장기간 노출시키지 마십시오.

7. 문제 해결

블루투스 충전기 2에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 장치가 켜지지 않음: Check all power connections. Ensure the vehicle engine is running and the DC input circuit breaker is activated.
• Not charging power station: Verify that the Charger 2's output voltage matches the power station's input requirements. Check all cable connections between the Charger 2 and the power station. Ensure the green indicator light on the Charger 2 is solid.
• 앱 연결 문제: Ensure Bluetooth is enabled on your phone and the Charger 2 is within range. Restart the app and try reconnecting.
• 과열: Ensure the Charger 2 is in a well-ventilated area and its vents are not blocked. Reduce the load if possible.
• Car battery discharge: The Charger 2 is designed to prevent this. If you suspect discharge, ensure the D+ signal is correctly connected (for smart alternators) and the unit is properly installed.

문제가 지속되면 BLUETTI 고객 지원팀에 문의하세요.

8. 사양

9. 보증 및 지원

9.1. 보증 정보

The BLUETTI Charger 2 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BLUETTI web보증 범위 및 기간에 대한 자세한 약관은 해당 사이트를 참조하세요.

9.2. 고객 지원

For technical assistance, troubleshooting, or any questions regarding your BLUETTI Charger 2, please contact BLUETTI customer support through their official web웹사이트 또는 제품 포장에 제공된 연락처 정보를 이용하십시오. 고객 지원팀에 문의하실 때는 제품 모델명과 일련번호를 준비해 주시기 바랍니다.