JOYING JY-ST900N12

JOYING 12.3" QLED Android 13 Car Stereo (JY-ST900N12) Instruction Manual

Model: JY-ST900N12 | Brand: JOYING

1. 소개 및 이상view

This manual provides detailed instructions for the installation, setup, and operation of your JOYING 12.3" QLED Android 13 Car Stereo, model JY-ST900N12. This unit is specifically designed for Subaru Forester models from 2009-2013 and Impreza WRX models from 2008-2012, offering a seamless plug-and-play experience.

Key features include a powerful Qualcomm QCM6490 8-Core processor, 12GB RAM, 256GB storage, 5G WiFi, 4G module, AM/FM radio, and precise GPS navigation. It supports both wired and wireless CarPlay and Android Auto for enhanced smartphone integration.

JOYING 12.3 inch QLED Android 13 Car Stereo installed in a Subaru dashboard

Image: JOYING 12.3" QLED Android 13 Car Stereo installed in a Subaru dashboard, showcasing its large display and integration.

2. 상자 안에 무엇이 들어있나요?

설치를 시작하기 전에 모든 구성품이 있는지 확인하십시오.

  • 12.3" Radio Unit (x1)
  • Frame Kit (x1)
  • Single Din Cage (x1)
  • 전원 케이블(x1)
  • 블루투스 안테나 (1개)
  • 와이파이 안테나 (2개)
  • 4G 안테나(x2)
  • USB 케이블(x2)
  • 사용 설명서(x1)
  • GPS 안테나 (1개)
  • 외부 마이크(1개)
  • AR 케이블 (1개)
  • 스크린 리본 케이블 (1개)
All components included in the JOYING car stereo package, laid out on a white surface.

Image: All components included in the JOYING car stereo package, laid out on a white surface, including the main unit, wiring harnesses, antennas, and tools.

3. 설치 가이드

This section outlines the general steps for installing the JOYING car stereo. Professional installation is recommended if you are unfamiliar with car audio systems.

3.1. 준비

  • 차량의 시동이 꺼져 있는지 확인하고, 전기 합선을 방지하기 위해 자동차 배터리의 음극 단자를 분리하십시오.
  • Gather necessary tools: plastic trim removal tool, screwdriver set.

3.2. 순정 라디오 제거

  1. Using a plastic trim removal tool, carefully pry off the decorative panel surrounding the factory radio. Start from the edges and work your way around.
  2. Once the decorative panel is loose, remove any fixing screws holding the factory radio in place.
  3. Gently pull out the factory radio from the dashboard.
  4. 순정 라디오 뒷면에서 모든 배선 하니스와 안테나 케이블을 분리하십시오.
Dashboard of a Subaru Forester/Impreza showing the factory radio and the surrounding trim panel.

Image: Dashboard of a Subaru Forester/Impreza showing the factory radio and the surrounding trim panel, indicating the area for removal.

3.3. Preparing the New Head Unit

  1. If your new head unit requires the original air vents, carefully remove them from the factory decorative panel and install them into the new frame kit.
  2. Connect the provided power cable harness to the corresponding socket on the back of the JOYING head unit.
  3. Connect the GPS antenna, WiFi antennas, 4G antennas, and USB cables to their respective ports on the head unit.
  4. If installing a reverse camera, connect the reversing image video cable and the reversing image detection line.

3.4. 배선 및 연결

  1. Connect the main power harness from the JOYING unit to the vehicle's factory wiring harness. Ensure all connections are secure.
  2. Connect the ground wire of the power harness to a suitable grounding point on the vehicle's body iron frame.
  3. Organize all cables neatly to prevent interference or damage during reassembly.

3.5. 새 헤드 유닛 설치

  1. Carefully slide the JOYING head unit into the dashboard opening.
  2. Secure the head unit with the appropriate screws.
  3. Reattach the decorative panel, ensuring all clips snap into place.

Video: Detailed installation guide for the car stereo, demonstrating removal of the old unit and connection of new wiring.

4. 설정 및 초기 구성

4.1. 전원 켜기 및 초기 부팅

Reconnect the negative terminal of the car battery. Turn on the vehicle's ignition. The head unit should power on and display the Android operating system.

4.2. Network Connectivity (5G WiFi & 4G Module)

  • 와이파이: Navigate to Settings > Network & Internet > Wi-Fi. Select your desired WiFi network and enter the password to connect. The unit supports dual WiFi bands (2.4 & 5G & 6 GHz).
  • 4G 모듈: Insert a compatible SIM card into the designated slot for mobile internet access. Note that the unit does not support making phone calls or sending SMS via the SIM card.

4.3. 블루투스 페어링

스마트폰을 블루투스로 연결하려면 다음 단계를 따르세요.

  1. On the head unit, go to the Bluetooth application.
  2. 스마트폰에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
  3. 선택하다

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.