소개
Thank you for choosing the roborock Saros 20 Robot Vacuum and Mop. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
설정
포장 풀기 및 배치
Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present. Place the RockDock charging station in an open area with sufficient clearance for the robot to maneuver.
- Ensure at least 75cm (29.5 inches) clearance above the dock for tank removal.
- Ensure at least 40cm (15.7 inches) clearance on both sides of the dock.
- Ensure at least 120cm (47.2 inches) clearance in front of the dock.
Image: All components of the roborock Saros 20, including the robot vacuum, RockDock, mop pads, power cord, cleaning solution, and user manual.
Connecting the RockDock
- Connect the power cord to the back of the RockDock.
- 전원 어댑터를 벽면 콘센트에 꽂으세요.
- Install the dock base by sliding it into the designated slot at the bottom front of the RockDock.
Video: A quick start guide demonstrating the initial setup of the roborock Saros 20, including unboxing, dock placement, and power connection.
초기 충전 및 앱 연결
Place the robot vacuum onto the RockDock to charge. For first-time use, download the Roborock app and follow the on-screen instructions to connect your device to your home Wi-Fi network (supports both 2.4 GHz and 5 GHz networks).
Video: Instructions on how to connect the roborock Saros 20 to the mobile application for smart control and mapping.
중요한:
- For optimal mapping, run the robot in "Vacuum Only" mode twice before enabling mopping functions.
- Ensure your phone is on a 2.4GHz or 5GHz mixed Wi-Fi network during setup.
작동 지침
청소 모드
The roborock Saros 20 offers various cleaning modes accessible via the Roborock app:
- 진공만: For dry debris on all surfaces.
- 걸레만: 딱딱한 바닥의 물걸레 청소용.
- 진공청소기 & 걸레질: 진공 청소와 걸레질을 동시에 할 수 있습니다.
- 맞춤형 청소 서비스: Adjust suction power, water flow, and cleaning routes for specific rooms or zones.
스마트 기능
- AdaptiLift Chassis 3.0: Dynamically adjusts the robot's height to cross thresholds up to 3.46 inches and clean carpets up to 1.18 inches deep. The robot learns and remembers the best strategy for crossing obstacles.
- StarSight 자율 시스템 2.0: Advanced 3D ToF sensors and an RGB camera enable precise navigation and obstacle recognition (over 300 types). The robot can detect and avoid small objects and cables.
- 다이렉트텍 기술: Identifies different types of messes (dry debris, liquid spills) and automatically adjusts cleaning strategy (boosts suction for dry, switches to mop-focused for liquid).
- 플렉시암 기술: Extends the side brush and mop to reach corners, edges, and under furniture (as low as 3.13 inches) for comprehensive coverage.
- AI-Powered App Control (SmartPlan 3.0): Learns your home layout and routines, optimizes cleaning sequences, and allows for voice control (e.g., "Hello Rocky").
Image: The roborock Saros 20 robot vacuum navigating around various household items on a wooden floor, demonstrating its obstacle avoidance capabilities.
Image: The roborock Saros 20 robot vacuum extending its side brush to clean along a wall and into a corner, highlighting its edge cleaning feature.
유지
정기적인 유지 관리는 최적의 성능을 보장하고 로보락 사로스 20의 수명을 연장합니다.
RockDock Maintenance
- 더러운 물 탱크 비우기: When the dirty water tank is full, remove it, empty the contents, rinse thoroughly, and securely close before reinstalling.
- 깨끗한 물 탱크를 다시 채우세요: Remove the clean water tank, fill with clean water, and securely close before reinstalling.
- 먼지백 교체: When the dust bag is full, open the front panel, remove the old dust bag (the carrying handle will seal it), wipe the filter, and insert a new disposable dust bag securely.
- Clean Cleaning Tray: Remove the cleaning tray from the dock, rinse it clean, and wipe it dry before reinstalling.
- Clean Charging Contacts and Dock Location Beacon: Use a dry, soft cloth to wipe these components.
Video: A detailed guide on how to clean and maintain the RockDock of the roborock Saros 20, including emptying tanks and replacing the dust bag.
로봇 청소기 유지 관리
- Clean Dustbin and Filter: Remove the top cover, take out the dustbin, open the filter cover, remove the washable filter, and rinse both the dustbin and filter with water. Air-dry for at least 24 hours before reinstalling. (Do not use a brush or your fingers on the filter).
- 깨끗한 걸레 패드: Remove the mop pads from the robot. Clean them with water and air-dry.
- 측면 브러시를 청소하세요: Remove the side brushes (using a screwdriver if necessary), clean any tangled hair or debris, and reinstall.
- Clean Omni-directional Wheel: Remove the omni-directional wheel, clean any tangled hair or debris, rinse with water, air-dry, and reinstall.
- Clean Main Brushes: Remove the main brush cover, remove the main brushes, clean any tangled hair or debris, wipe the main wheels, and reinstall the brushes and cover ensuring correct fitting.
Video: Instructions on how to maintain the roborock Saros 20 robot vacuum, covering cleaning of the dustbin, filters, brushes, and wheels.
문제 해결
로보락 사로스 20 사용 중 문제가 발생하면 다음의 일반적인 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 로봇 전원이 켜지지 않습니다. | 배터리 잔량이 부족합니다. | Place the robot on the RockDock to charge. |
| 로봇이 자주 멈춥니다. | Obstacles (cables, small items) or high thresholds. | Clear the area of obstacles. Ensure AdaptiLift Chassis 3.0 is enabled in the app for high thresholds. |
| 세척 성능이 좋지 않음. | Clogged brushes/filters, full dustbin, or dirty mop pads. | Clean/replace brushes and filters. Empty dustbin. Clean mop pads. |
| Mop pads detaching during cleaning. | Improper installation or worn-out pads. | Ensure mop pads are securely attached. Replace if worn. |
| 앱 연결 문제. | Incorrect Wi-Fi password, wrong network band, or robot not in pairing mode. | Ensure correct Wi-Fi credentials. Check phone is on 2.4/5GHz mixed network. Reset Wi-Fi on robot (press Power and Dock buttons simultaneously for 3 seconds). |
For more detailed troubleshooting, please refer to the Roborock app or the official Roborock web대지.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 로보록 |
| 모델명 | 로보록 사로스 20 |
| 흡입력 | 36,000파스칼 |
| 장애물 통과 | Up to 3.46 inches (double-layer threshold) |
| Carpet Cleaning Depth | 최대 1.18인치 |
| 로봇 높이 | 3.14 inches (Ultra Slim) |
| 걸레 세척 온도 | 212°F (Hot Water Wash) |
| 걸레 건조 온도 | 131°F (Hot Air Drying) |
| Dust Emptying Interval | Up to 65 days (auto dust emptying) |
| 내비게이션 시스템 | StarSight Autonomous System 2.0 (3D ToF sensors, RGB camera) |
| 장애물 인식 | Over 300 types of obstacles |
| 배터리 수명 | 180 분 |
| 소음 수준 | 55데시벨 |
| 제어 방법 | App, Push Button, Voice (Amazon Alexa, Google Home, Siri, Matter) |
| 품목 치수(L x W x H) | 15인치 길이 x 18.7인치 너비 x 19.2인치 높이 |
| 품목 무게 | 27.12 파운드 |
보증 및 지원
The roborock Saros 20 comes with a standard manufacturer's warranty. For specific warranty details and to register your product, please visit the official roborock web대지.
보호 계획
추가 보장 플랜을 구매하실 수 있습니다.
- 2년 보호 계획: 119.99달러 일회성 결제
- 3년 보호 계획: 159.99달러 일회성 결제
- 완벽한 보호: Monthly payment of $16.99 (covers all eligible past and future purchases)
For technical support, troubleshooting assistance, or to inquire about service, please contact roborock customer service through the app or their official web대지.