Cooler Master ELITE Gold 1000W Power Supply Unit Instruction Manual

1. 서론

Thank you for choosing the Cooler Master ELITE Gold 1000W Power Supply Unit. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new power supply. The ELITE Gold 1000W is designed for daily gaming and PC building enthusiasts, fully supporting the latest ATX 3.1 standard and offering flexible compatibility with RTX 50 series GPUs and future upgrades.

2. 안전 정보

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in personal injury or damage to the product or connected devices.

• 감전 위험: 전원 공급 장치를 열지 마십시오.asing. 고용량tages are present inside, even when the unit is turned off. There are no user-serviceable parts inside.
• 적절한 접지: Ensure the power supply is properly grounded using the provided power cord.
• 통풍: Do not block any ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
• 수분: 전원 공급 장치를 물이나 과도한 습기에 노출시키지 마십시오.
• 전원: Connect the power supply only to a power source with the correct voltage and frequency as indicated on the unit's label.
• 케이블 관리 : Route cables carefully to avoid pinching or damage.
• 온도: Operate the power supply within the specified temperature range (up to 40°C high-load environments).

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Cooler Master ELITE Gold 1000W Power Supply Unit
• Modular Cable Set (including 12+4 Pin, ATX24 Pin, EPS 4+4 Pin, EPS 8 Pin, SATA + Peripheral 4 Pin connectors)
• AC Power Cord (A/JP cord)
• 장착 나사
• 사용자 설명서

4. 설정 및 설치

Follow these steps to install your Cooler Master ELITE Gold 1000W Power Supply Unit:

1. 시스템 준비:

   Before installation, ensure your computer is completely powered off and unplugged from the wall outlet. Discharge any residual power by pressing the power button a few times.

2. Install the PSU into the PC Case:

   Position the ELITE Gold 1000W PSU into the designated power supply bay in your PC case. The compact design (under 150mm) facilitates easy installation in various PC cases. Secure the PSU with the provided mounting screws.

   

   Image: The Cooler Master ELITE Gold 1000W Power Supply Unit installed within a computer chassis, viewed from above, highlighting its compact form factor and top-mounted fan grill.
3. 모듈형 케이블 연결:

   The ELITE Gold 1000W features a full modular design. Connect only the necessary cables to the power supply unit first. Refer to the labels on the PSU for correct connector types (e.g., 10P MB, 18P MB, 8P PCI-E/CPU, 12V-2x6, 6P SATA/HDD).

   

   이미지: 자세한 view of the Cooler Master ELITE Gold 1000W Power Supply Unit's modular cable interface, clearly showing labeled ports for various component connections such as motherboard, CPU, PCIe, and SATA/HDD.

   

   Image: The Cooler Master ELITE Gold 1000W Power Supply Unit with its full suite of modular cables securely connected and neatly routed, demonstrating the full modular design.
4. 구성 요소에 연결:
   • 마더보드: 24핀 ATX 케이블을 마더보드에 연결합니다.
   • CPU: Connect the 4+4 pin or 8-pin EPS cable(s) to your motherboard's CPU power connector(s).
   • 그래픽 카드(GPU): Connect the appropriate PCIe power cables (e.g., 8-pin, 12+4 pin for ATX 3.1/PCIe Gen 5.1) to your graphics card(s). This unit is optimized for RTX 50 series GPUs.
   • 저장 장치: SATA 전원 케이블을 SSD, HDD, 광학 드라이브에 연결합니다.
   • 주변 장치: Connect peripheral 4-pin cables to any other devices requiring power.
5. AC 전원 연결:

   Connect the provided AC power cord to the power supply unit and then to a grounded wall outlet. Ensure the power switch on the PSU is in the OFF position before connecting to the wall outlet.

5. 사용 설명서

설치가 완료되면 다음 단계를 따라 시스템을 작동하십시오.

1. 전원 켜기:

   Flip the power switch on the back of the power supply unit to the ON (I) position.

2. 시스템 시작:

   Press the power button on your computer case to start your system. The ELITE Gold 1000W will provide stable and efficient power, thanks to its 80 Plus Gold certification and quiet, long-life rifle bearing fan.
3. 전원 끄기 :

   To power off your system, shut down your operating system normally. For complete power disconnection, flip the power switch on the back of the power supply unit to the OFF (O) position and unplug the AC power cord.

6. 유지관리

Proper maintenance ensures the longevity and optimal performance of your power supply unit.

• 먼지 청소: 전원 공급 장치의 팬과 통풍구에 쌓인 먼지는 주기적으로 압축 공기를 이용하여 청소하십시오. 청소하기 전에 시스템의 전원을 끄고 전원 플러그를 뽑으십시오.
• 통풍: PC 케이스의 공기 흐름이 충분한지, 그리고 파워서플라이 팬의 흡입구와 배출구가 막히지 않았는지 확인하십시오.
• 케이블 검사: Regularly check all modular cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.

이미지: 클로즈업 view of the power supply's cooling fan, featuring five blades designed for efficient airflow and quiet operation.

7. 문제 해결

If you encounter issues with your power supply, refer to the following troubleshooting steps:

• 전원 없음:
  • AC 전원 코드가 전원 공급 장치와 벽면 콘센트에 모두 단단히 연결되어 있는지 확인하세요.
  • 파워서플라이 뒷면의 전원 스위치가 켜짐(I) 위치에 있는지 확인하십시오.
  • Check all modular cables (24-pin ATX, EPS, PCIe) are firmly seated in both the PSU and the respective components.
  • 다른 장치로 벽면 콘센트를 테스트하여 제대로 작동하는지 확인하세요.
• 시스템 불안정/무작위 종료:
  • 과열을 방지하려면 PC 케이스 내부가 적절히 환기되도록 하세요.
  • Verify that your system's power requirements do not exceed the 1000W capacity of the PSU.
  • 느슨한 케이블 연결이 있는지 확인하세요.
• 특이한 소음:
  • A quiet rifle bearing fan is designed for minimal noise. If you hear unusual grinding or rattling, ensure no cables are obstructing the fan.
  • 소음이 계속되면 Cooler Master 고객 지원팀에 문의하십시오.

이러한 단계를 수행해도 문제가 해결되지 않으면 Cooler Master 고객 지원팀에 문의하여 추가 지원을 받으십시오.

8. 사양

Detailed technical specifications for the Cooler Master ELITE Gold 1000W Power Supply Unit:

이미지: 상단 view of the Cooler Master ELITE Gold 1000W Power Supply Unit, showcasing its branding and honeycomb-patterned ventilation.

Image: The official 80 PLUS GOLD certification logo, indicating high power efficiency.

9. 보증 및 지원

The Cooler Master ELITE Gold 1000W Power Supply Unit comes with a 5년 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

기술 지원, 보증 청구 또는 기타 문의 사항은 Cooler Master 공식 웹사이트를 방문하십시오. website or contact your local Cooler Master distributor. Please have your product model number (MPX-A005-AFAG-BJP) and proof of purchase ready when contacting support.