Dapper Supply DP-WBFS1218

Dapper Supply DP-WBFS1218 20-inch Walk-Behind Floor Scrubber Polisher User Manual

모델: DP-WBFS1218 | 브랜드: 대퍼 서플라이

1. 서론

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Dapper Supply DP-WBFS1218 Battery Powered Walk-Behind Floor Scrubber Polisher Machine. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Dapper Supply DP-WBFS1218 is designed for commercial floor cleaning, offering a 20-inch cleaning path, powerful scrubbing, and efficient drying for various hard floor surfaces.

2. 안전 지침

경고: 이러한 안전 지침을 따르지 않을 경우 심각한 부상이나 재산 피해가 발생할 수 있습니다.

  • 기계를 작동하기 전에 반드시 설명서 전체를 읽고 이해하세요.
  • Ensure the machine is turned off and unplugged (if charging) before performing any maintenance, cleaning, or adjustments.
  • Do not operate the machine in areas with flammable liquids, gases, or dust, as this may cause fire or explosion.
  • Keep hands, feet, and loose clothing away from moving parts, especially the brush and squeegee.
  • Use only approved brushes, pads, and cleaning solutions.
  • Do not wash the operation panel with water.
  • Charging should be carried out in a well-ventilated area, away from high temperatures and direct sunlight.
  • When the brush plate is running, do not park the machine for a long time.
  • Wear appropriate personal protective equipment (PPE) such as non-slip footwear and eye protection.
  • 어린이 또는 교육을 받지 않은 사람이 기계를 작동시키지 못하도록 하십시오.
  • Always operate on stable, level surfaces. The machine supports inclines up to 20 degrees, but caution is advised.

3. 제품 오버view

The Dapper Supply DP-WBFS1218 is a robust walk-behind floor scrubber designed for commercial use. Key features include:

  • 20-inch Cleaning Path: Efficiently covers large areas with a 20-inch cleaning width and a 31.5-inch squeegee for streak-free drying.
  • Heavy Brush Pressure: 66 lbs of brush pressure combined with a 200 RPM brush motor for deep scrubbing and removal of tough grime.
  • 높은 생산성: Cleans up to 27,000 sq ft/hr, suitable for warehouses, retail, schools, and commercial buildings.
  • Strong Vacuum System: 170 kPa suction and a 500W vacuum motor ensure floors are dry in seconds.
  • Large Dual Tanks: Features a 14.5-gallon solution tank and a 17-gallon recovery tank for extended cleaning sessions.
  • Long Runtime & Efficient Charging: Powered by a 24V / 85Ah battery, providing 3-4 hours of runtime per charge with an 8-hour full recharge cycle.
  • Convenient Spray Hose: Integrated rear spray hose for spot cleaning, with a 0.92 ft reach and 22 lbs pressure.
  • 조용한 작동: 60dB의 조용한 소음 수준으로 작동합니다.
  • 변하기 쉬운: Supports operation on inclines up to 20 degrees.

구성 요소

Familiarize yourself with the main components of your floor scrubber:

Dapper Supply DP-WBFS1218 Walk-Behind Floor Scrubber

그림 3.1: 전반적인 view of the Dapper Supply DP-WBFS1218 Walk-Behind Floor Scrubber Polisher Machine.

옆 view of Dapper Supply DP-WBFS1218 Floor Scrubber

그림 3.2: 사이드 프로file of the floor scrubber, showing the main body and handle.

앞쪽 view of Dapper Supply DP-WBFS1218 Floor Scrubber

그림 3.3: 앞쪽 view of the floor scrubber, highlighting the brush assembly.

Dapper Supply DP-WBFS1218 Floor Scrubber showing rugged design

그림 3.4: The robust construction of the Dapper Supply floor scrubber, built for durability.

4. 설정

  1. 짐 풀기: 기계와 모든 부속품을 포장에서 조심스럽게 꺼내세요. 배송 중 손상된 부분이 있는지 확인하세요.
  2. 배터리 충전:
    • Connect the charger to the machine's charging port and then to a suitable power outlet.
    • Allow approximately 8 hours for a full charge. The battery provides 3-4 hours of runtime.
    • Ensure charging is done in a well-ventilated area.
  3. Attaching the Brush/Pads:
    • Ensure the machine is off.
    • Align the brush or scouring pad (3 included) with the brush plate and secure it firmly.
    Close-up of the brush assembly on the Dapper Supply floor scrubber

    그림 4.1: 클로즈업 view of the brush assembly, showing how brushes or pads are attached.

  4. 용액 탱크 채우기:
    • Open the cap of the 14.5-gallon solution tank.
    • Fill with water and an appropriate, non-foaming cleaning solution according to the manufacturer's instructions. Do not overfill.
    Person filling the solution tank of the Dapper Supply floor scrubber

    그림 4.2: Filling the 14.5-gallon solution tank with water and cleaning solution.

  5. Adjusting the Squeegee: Ensure the 31.5-inch squeegee is properly positioned and adjusted for optimal water recovery.

5. 사용 설명서

  1. 머신 시작:
    • 시동 키를 꽂고 ON 위치로 돌리세요.
    • The control panel will illuminate.
  2. Engaging Scrubbing and Vacuum:
    • Press the brush button to start the 200 RPM brush.
    • Press the vacuum button to activate the 170 kPa suction system.
    • 손잡이를 편안한 작업 높이로 조절하십시오.
    Person operating the Dapper Supply floor scrubber

    그림 5.1: Operator using the Dapper Supply floor scrubber for cleaning.

  3. 청소 절차:
    • Walk behind the machine at a steady pace, allowing the brush to scrub and the squeegee to recover the dirty solution.
    • The 20-inch cleaning path ensures efficient coverage.
    • For heavily soiled areas, a second pass may be required.
  4. Using the Integrated Spray Hose:
    • To use the spray hose for spot cleaning or pre-treating, press the "Water gun button" located on the side panel.
    • Direct the spray nozzle towards the desired area.
    Person using the integrated spray hose on the Dapper Supply floor scrubber

    그림 5.2: Utilizing the integrated spray hose for targeted cleaning.

  5. 기계 정지:
    • Release the handle and turn the key to the OFF position.
    • Ensure all functions are disengaged.

6. 유지관리

Regular maintenance ensures the longevity and optimal performance of your floor scrubber.

  1. 매번 사용 후:
    • 배수 회수 탱크: Empty the 17-gallon recovery tank. Rinse it thoroughly with clean water.
    • Clean Squeegee: Inspect and clean the squeegee blades. Replace if worn or damaged.
    • Clean Brush/Pads: Remove and rinse the brush or pads. Allow them to air dry.
    • 닦아내는 기계: 광고로 기계 외부 청소amp 옷감.
  2. 배터리 관리 :
    • Recharge the battery after each use, regardless of remaining charge, to maximize battery life.
    • 배터리가 자주 완전히 방전되지 않도록 하세요.
  3. 정기 점검:
    • 모든 호스와 연결부에 누출이나 손상이 있는지 확인하십시오.
    • 모든 패스너가 단단히 고정되어 있는지 확인하세요.

동영상 6.1 : This video demonstrates the operation and maintenance of the Dapper 20" Commercial Floor Scrubber, including filling and draining tanks, and brush operation.

7. 문제 해결

This section provides solutions to common issues. For problems not listed here, contact Dapper Supply support.

문제 가능한 원인 해결책
기계가 시작되지 않습니다 Battery discharged, key not in ON position, safety switch not engaged. Charge battery, ensure key is ON, check safety switches.
스크러빙 성능이 좋지 않음 Worn brush/pad, incorrect cleaning solution, insufficient solution flow. Replace brush/pad, use appropriate solution, check solution tank level and flow.
Water not being recovered Clogged squeegee, worn squeegee blades, full recovery tank, vacuum motor issue. Clean squeegee, replace blades, empty recovery tank, check vacuum hose for blockages.
기계가 예기치 않게 멈췄습니다. Low battery charge, motor overload. Recharge battery, reduce load, check for obstructions.

8. 사양

특징 세부 사항
상표 대퍼 서플라이
모델 번호 DP-WBFS1218
청소 경로 20인치
스퀴지 너비 31.5인치
솔루션 탱크 용량 14.5갤런
회수 탱크 용량 17갤런
브러시 속도 200 RPM
브러시 압력 66파운드
진공 흡입 170k파스칼
진공 모터 파워 500 와트
배터리 24V / 85Ah
충전당 런타임 3-4시간
Full Recharge Cycle 8시간
소음 수준 60데시벨
최대 경사 20°
품목 무게(배터리 제외) 155파운드
제품 크기(D x W x H) 57인치 깊이 x 27인치 너비 x 49인치 높이
포함된 구성 요소 2 Brushes, 3 Scouring Pads

9. 보증 및 지원

Your Dapper Supply DP-WBFS1218 Floor Scrubber is backed by a 1년 부품 및 인력 보증.

For technical assistance, parts availability, or warranty claims, please contact Dapper Supply's U.S.-based support team. Refer to your purchase documentation for contact details or visit the official Dapper Supply web대지.

© 2024 Dapper Supply. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.