mGYDY K01 EBike Display User Manual

1. 서론

The mGYDY K01 EBike Display is a compact and intelligent speedometer cycling computer designed for electric bicycles. It provides essential riding data and control functions, enhancing your ebike experience. This manual provides detailed instructions for installation, operation, and maintenance of your K01 display.

2. 호환성

The K01 EBike Display is specifically designed for use with BAFANG electric bike motors that utilize the UART communication protocol. It is compatible with BAFANG BBS0102B, G340, G320, and BBSHD mid-drive motors.

The display can be mounted on handlebars with a diameter of 직경 φ22.2mm or 직경 φ25.4mm.

메모: Please verify your ebike motor's model number and communication protocol before installation to ensure compatibility.

3. 제품 특징

• 2.2인치 LCD 화면: Provides clear, glare-resistant visuals with a 4-level backlight adjustment for optimal visibility in various lighting conditions.
• All-Weather Readability: IP66 waterproof rating ensures durability in rain or snow. Features an auto-dimming backlight and a light sensor to activate headlights at dusk.
• 포괄적인 데이터 표시: Shows real-time speed, single trip distance, total mileage (ODO), maximum speed, average speed, battery level, and power assist (PAS) level.
• Efficient Speed Control: Offers 0-9 adjustable power assist levels to suit different riding conditions and conserve energy.
• Walk Assist Function: Includes a 6km/h walk assist feature for easy maneuvering when not riding.
• 오류 코드 표시: Displays error codes for convenient system maintenance and troubleshooting.
• 비밀번호 보호: Built-in system to secure your ebike from unauthorized use.

4. 패키지 내용

패키지에는 다음이 포함됩니다.

• 1 x mGYDY K01 EBike Display

5. 설정 및 설치

Follow these steps to install your K01 EBike Display:

1. 장착 위치 선택: The K01 display is designed to be installed on the left side of the handlebar. Ensure there is sufficient space for secure mounting.
2. 핸들바 직경: Confirm your handlebar diameter is either 22.2mm or 25.4mm. The display's clamp is designed to fit these sizes.
3. 디스플레이 보안: Open the display clamp, position it on the handlebar, and tighten the screws securely. Ensure the display is oriented correctly for optimal view주고받음.
4. 케이블 연결: Locate the 5-pin female circular connector on the display cable. Connect it to the corresponding male connector on your BAFANG motor system. Ensure the connection is firm and secure.
5. 케이블 관리 : Route the cable neatly along your ebike frame, securing it with cable ties if necessary, to prevent interference with moving parts.

Image: K01 EBike Display mounted on a handlebar, showing the side view 클과 함께amp. This illustrates the typical installation position.

이미지: 후면 view of the K01 EBike Display, highlighting the handlebar clamp mechanism and the mounting screw.

이미지: 하단 view of the K01 EBike Display, illustrating the integrated cable and the 5-pin female circular connector for connection to the ebike motor.

6. 사용 설명서

The K01 display features three buttons for operation: + (Plus), 힘, 그리고 - (Minus).

이미지: 앞면 view of the K01 EBike Display with the screen illuminated, displaying current speed, battery charge, and power assist level.

6.1 전원 켜기/끄기

• 를 누르고 계세요 힘 button to turn the display on or off.

6.2 Adjusting Power Assist (PAS) Levels

• 를 누르세요 + button to increase the power assist level (0-9).
• 를 누르세요 - button to decrease the power assist level (0-9).
• Level 0 indicates no motor assistance.

6.3 Displaying Mileage and Speed Data

• The display automatically shows real-time speed.
• 짧게 누르세요 힘 button to cycle through different data displays:
• 여행: Single trip mileage.
• 오도: Total mileage.
• 최대 : Maximum speed achieved during the current trip.
• AVG : 현재 이동 중 평균 속도.

6.4 헤드라이트 제어

• The display features a light sensor that can automatically activate your ebike's headlights at dusk if connected and supported by your ebike system.
• 머리amp indication icon will appear on the display when the headlights are active.

6.5 6km/h Walk Assist Function

• To activate the walk assist function, press and hold the - button. The ebike will move at a steady speed of 6km/h.
• 릴리스하다 - button to deactivate the walk assist.

7. 디스플레이 기능view

The K01 display provides a clear overview of your ebike's status and riding data. Refer to the image below for a visual guide to the display elements.

Image: K01 EBike Display with all segments illuminated, providing a comprehensive view of speed, battery level, PAS level, and other indicators like TRIP, ODO, MAX, AVG, and ERR.

• 배터리 표시: Displays the current battery charge level (1-9 levels).
• 속도 표시: Shows current speed in MPH or KM/H.
• 마일리지 디스플레이: Toggle between TRIP (single trip distance) and ODO (total distance).
• 패스 레벨: Indicates the current Power Assist System level (0-9).
• 헤드라이트 아이콘: Illuminates when headlights are active.
• Error Code (ERR): Displays specific error codes if a system fault occurs.

8. 사양

Technical specifications for the mGYDY K01 EBike Display:

Image: Technical drawing of the K01 EBike Display, illustrating its physical dimensions: 78.5mm in length, 49mm in height, and 14mm in thickness.

9. 유지관리

To ensure the longevity and optimal performance of your K01 EBike Display, follow these maintenance guidelines:

• 청소: 디스플레이 화면과 본체는 부드러운 천으로 닦아주세요.amp cloth. Avoid using abrasive cleaners or solvents, which can damage the screen or casing.
• 물 노출: While the display is IP66 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is dry before connecting or disconnecting.
• 온도: Operate and store the display within the specified temperature ranges (-20°C to 70°C operating, -30°C to 80°C storage) to prevent damage.
• 케이블 검사: 디스플레이 케이블과 커넥터에 마모, 손상 또는 부식 흔적이 있는지 주기적으로 점검하십시오. 연결 상태가 단단히 고정되어 있는지 확인하십시오.
• 물리적 보호: Avoid dropping the display or subjecting it to strong impacts, which can cause internal or external damage.

10. 문제 해결

The K01 display is designed to indicate error codes (ERR) if a system issue is detected. If you encounter a problem, check the display for any error codes and refer to your BAFANG motor's manual for specific error code meanings and troubleshooting steps.

• 디스플레이가 켜지지 않음:
  • Ensure the ebike battery is charged and turned on.
  • Check that the display cable is securely connected to the motor system.
  • Verify there is no visible damage to the display or cable.
• Inaccurate Speed/Mileage:
  • Ensure the wheel size setting in your ebike controller (if adjustable) is correct.
  • Check the speed sensor on your ebike for proper alignment and function.
• PAS 레벨이 변하지 않음:
  • Verify the buttons are functioning correctly.
  • Check for any error codes displayed.

If the issue persists or you encounter an unfamiliar error code, please contact the manufacturer's support for assistance.

11. 보증

The mGYDY K01 EBike Display comes with a 1년 제조업체 보증 구매일로부터 적용됩니다. 이 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 단, 오용, 사고, 무단 개조 또는 부적절한 설치로 인한 손상은 보증 대상에서 제외됩니다.

보증 청구를 위해 구매 증명서를 보관하십시오.

12. 지원

For further assistance, technical support, or warranty inquiries, please contact mGYDY customer service through the retailer where you purchased the product or refer to the contact information provided with your purchase.