소개
The Zooz ZEN58 800LR is a compact Z-Wave Long Range Low Voltage XS Relay designed to integrate low-voltage devices into your Z-Wave smart home system. It enables ON/OFF control for loads up to 3 Amps and supports 0-240 Volts, making it suitable for applications such as garage doors, entry gates, or controlling humidifiers. This manual provides detailed instructions for safe installation, operation, and maintenance of your ZEN58 800LR relay.
안전 정보
Please read all safety precautions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or property damage.
- 이 장치는 실내에서만 사용하도록 설계되었습니다.
- 설치나 정비를 하기 전에 회로 차단기에서 전원이 분리되었는지 확인하세요.
- Installation should be performed by a qualified electrician or trained professional.
- 최대 하중 3을 초과하지 마십시오. Amp240V입니다.
- The device is powered by 9-40 V AC/DC only.
- Use dry contact input (NO Voltage) for connected switches or sensors.
- Maximum wire size for terminals is 14 AWG.
- Do not use with dimmers or electronic switches; only simple toggle and momentary switches are supported for analog input.
제품 끝view
상자 안에 무엇이 들어있나요?
- Zooz ZEN58 800LR Smart Relay
- 사용자 설명서
주요 특징
- Z-Wave 제어: Adds Z-Wave ON/OFF functionality to low-voltage loads up to 3 Amps, 0-240 Volts.
- 아날로그 입력 Connects to a wall switch (toggle or momentary) or binary sensors (e.g., open/close, water/no water) with no voltage on input wires.
- 컴팩트한 디자인: Extra small size (1.2" tall, 1.0" wide, 0.6" deep) for installation in crowded or shallow electrical boxes.
- 고급 보안: Features S2 authenticated security protocol and SmartStart for secure and easy pairing.
- 장거리: Z-Wave Long Range enabled for extended communication.
- 폭넓은 호환성: Works with various Z-Wave hubs including Z-Box Hub, Hubitat, Home Assistant (Z-Wave JS), and SmartThings (for basic on/off).
설정 및 설치
배선 지침
Before proceeding, ensure power is OFF at the circuit breaker. The ZEN58 800LR requires a 9-40V AC/DC power source and uses dry contact inputs. Do not apply voltage to the input (IN) terminals.
- 전원 연결: Connect your 9-40V AC/DC power supply to the DC+ and DC- terminals on the relay. Observe polarity if using DC.
- 부하 연결: Connect the load you wish to control (e.g., garage door opener, solenoid valve) to the OUT terminals. This is a dry contact output, meaning it acts as a switch to complete or break a circuit for your load.
- Analog Input (Optional): If connecting a wall switch or binary sensor, connect it to the IN and S terminals. Ensure the switch provides a dry contact closure (no voltage). This input supports simple toggle or momentary switches.
- 안전한 배선: Ensure all wire connections are secure and within the maximum 14 AWG wire size.
앞쪽 view of the ZEN58 800LR relay, illustrating the terminal block for power input (DC+, DC-), dry contact output (OUT), and dry contact analog input (IN, S).
뒤쪽에 view of the ZEN58 800LR relay, displaying regulatory information, Z-Wave region, firmware version, and the SmartStart DSK (Device Specific Key) for secure pairing.
Size comparison of the ZEN58 800LR relay, highlighting its compact dimensions (1.0" wide, 1.2" tall) relative to a US quarter and another Zooz relay model, demonstrating its suitability for tight spaces.
Z파 페어링
The ZEN58 800LR supports S2 authenticated security and SmartStart for easy and secure inclusion into your Z-Wave network. A compatible Z-Wave hub is required (sold separately).
- 전원 켜기: After wiring, restore power to the circuit. The relay will power on.
- SmartStart 포함: If your Z-Wave hub supports SmartStart, scan the QR code on the back of the relay (or on the packaging) using your hub's app. The device will automatically include into your network.
- 매뉴얼 포함: If your hub does not support SmartStart, initiate "Add Device" or "Z-Wave Inclusion" mode on your Z-Wave hub. Then, quickly press the Z-Wave button on the ZEN58 800LR three times. The LED indicator will confirm successful pairing.
- S2 보안: During inclusion, your hub may prompt you to enter the 5-digit Device Specific Key (DSK) found on the QR code label for S2 authenticated security.
Compatible Z-Wave Hubs:
- Z-Box Hub (fully compatible)
- 휴비타트
- Home Assistant (Z-Wave JS)
- 홈 씨어터
- SmartThings (for basic on/off functionality)
작동 지침
Once successfully paired with your Z-Wave hub, the ZEN58 800LR can be controlled remotely via your Z-Wave network or locally via the connected analog input.
- Z-Wave 제어: Use your Z-Wave hub's interface or associated smart home app to turn the connected load ON or OFF. The relay will respond to commands sent over the Z-Wave network.
- Analog Input Control: If a physical switch is connected to the IN and S terminals, operating this switch will toggle the state of the relay. For example, pressing a momentary switch connected to a garage door opener will activate the opener.
- 상태 표시: The LED indicator on the relay provides visual feedback on its status (e.g., pairing mode, ON/OFF state). Refer to your hub's documentation for specific LED behavior during pairing.
유지
The Zooz ZEN58 800LR is designed for reliable, long-term operation with minimal maintenance.
- 기기에 먼지와 습기가 닿지 않도록 하십시오.
- 기기를 직접 열거나 수리하려고 하지 마십시오. 서비스가 필요한 경우 자격을 갖춘 전문가에게 문의하십시오.
- 전선 연결 상태를 주기적으로 점검하여 안전하게 유지되는지 확인하십시오.
문제 해결
일반적인 문제 및 솔루션
- 장치가 페어링되지 않음:
- Ensure the device is powered correctly (9-40V AC/DC).
- Verify your Z-Wave hub is in inclusion mode.
- Try pressing the Z-Wave button on the relay 3 times quickly.
- Move the relay closer to the hub during the pairing process.
- Perform a Z-Wave exclusion first (see your hub's manual) and then try inclusion again.
- Relay not responding to commands:
- Check the power supply to the relay.
- Verify the Z-Wave network connection and signal strength.
- Ensure the connected load is within the 3 Amp 한도.
- Check the wiring to the load.
- Analog input switch not working:
- Confirm the switch is a dry contact type (no voltag전자 출력).
- Ensure the switch is properly connected to the IN and S terminals.
- Verify the switch type is toggle or momentary, not a dimmer or electronic switch.
- Poor Z-Wave Long Range performance:
- Ensure your Z-Wave hub supports Z-Wave Long Range.
- Minimize physical obstructions (concrete walls, large metal objects) between the relay and the hub.
- Consider adding Z-Wave repeaters if range is consistently an issue.
명세서
| 모델 번호 | 젠58 800LR |
| Z-Wave 지역 | 미국/캐나다/멕시코 |
| 힘 | 9-40V 교류/직류 |
| 최대 부하 | 3 Amp240V에서 |
| 최대 와이어 크기 | 14와이어 |
| Z-파 범위 | Up to 300 feet line of sight (1300 feet with Z-Wave Long Range enabled) |
| 치수(길이 x 너비 x 높이) | 1.2인치 x 1.0인치 x 0.6인치(30.5 x 25.4 x 15.2mm) |
| 작동 온도 | 32-104° 화씨(0-40° 섭씨) |
| 설치 및 사용 | 실내 전용 |
| 연결 프로토콜 | 지웨이브 |
| 보안 | S2 인증 |
| 인증 | 연방통신위원회(FCC) |
| GTIN / UPC | 853478006582 |
보증 및 지원
The Zooz ZEN58 800LR comes with a standard warranty. You can extend this to a 5년 보증 by registering your device within 30 days of purchase. Zooz also provides 평생 기술 지원 자사 제품의 경우.
For warranty registration, technical assistance, or further inquiries, please visit the official Zooz web사이트를 방문하거나 고객 지원팀에 문의하세요.
