ANCEL MR500 해양 진단 도구 사용 설명서

1. 서론

The ANCEL MR500 is a marine diagnostic tool designed for Yamaha WaveRunner (PWC) and Outboard Engine models from 2003 to 2022. This device facilitates advanced diagnostics, parameter configuration, and performance analysis by communicating with the Engine Control Unit (ECU) and Engine Management Module (EMM).

Image 1.1: The ANCEL MR500 Marine Diagnostic Tool, showcasing its 5-inch touchscreen interface.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• ANCEL MR500 진단 도구
• Diagnostic Cable(s) for Yamaha connection
• USB Cable for updates and power
• 사용 설명서 (본 문서)
• 하드 보호 케이스

Image 2.1: The ANCEL hard protective case, measuring 13.38 x 8.68 x 4.33 inches, designed for storage and transport of the MR500 and its accessories.

Image 2.2: Illustrates the portability of the ANCEL MR500 protective case.

3. 제품 특징

• 종합 진단: Supports all Yamaha WaveRunner (PWC) and Outboard Engine models from 2003–2022.
• ECU and Fault Code Management: Reads and clears diagnostic trouble codes (DTCs) to identify and resolve engine issues.
• 15가지 이상의 특수 기능: Includes active tests, parameter configurations, and service resets.
• 사용자 친화적인 인터페이스: Features a 5.0-inch touchscreen tablet for intuitive operation.
• 데이터 프레젠테이션: Offers multiple display methods for live data, including graphs, tables, and dashboards, along with data freeze frame capabilities.

Image 3.1: The ANCEL MR500's user-friendly interface, highlighting features like updates, screenshots, and DTC lookup.

4. 호환성

The ANCEL MR500 is compatible with the following Yamaha models:

• Yamaha WaveRunner (PWC) Models (2003-2022): EX, EX Deluxe, EX Sport, EXR, EXR Deluxe, FX, FX 140, FX Cruiser, FZR, FZS, GP1300R, GP1800, GP1800R, VX, VX Cruiser, VX Cruiser HO, VX Deluxe, VX Sport, VXR, VXS 등.
• Yamaha HPDI Outboard Engine Models (up to 2022): XF375, XF425, Z150, Z175, Z200, Z225, Z250, Z300, and more.

Image 4.1: The ANCEL MR500 supports a wide range of Yamaha watercraft and outboard engine models from 2003 to 2022.

5. 설정

1. 전원 켜기: Connect the diagnostic tool to a power source using the provided USB cable, or ensure the internal battery is charged.
2. 차량에 연결: Locate the diagnostic port on your Yamaha WaveRunner or Outboard Engine. Connect the appropriate diagnostic cable from the MR500 to the vehicle's diagnostic port.
3. 초기 부팅: The device will power on automatically or prompt you to press the power button. Follow any on-screen instructions for initial setup, such as language selection.

6. 사용 설명서

6.1 기본 탐색

The MR500 features a 5.0-inch touchscreen. Navigate through menus by tapping icons and options. Use the back button or gestures as indicated on-screen to return to previous screens.

6.2 진단 기능

After connecting the tool to your Yamaha vehicle, select the 'Marine Diag' option from the main menu to access diagnostic features.

• ECU 정보 검색: Access details about the Engine Control Unit.
• 코드 읽기: Display current, pending, and historical diagnostic trouble codes (DTCs).
• 명확한 코드: Erase DTCs from the ECU memory after repairs are completed.
• DTC 조회: Provides definitions and potential causes for specific DTCs.
• Read Engine Hours: View the total operating hours of the engine.
• Data Freeze Frame: Captures specific vehicle data at the moment a fault code is set.
• 라이브 데이터 스트림: Displays real-time sensor data and parameters. This data can be viewed in various formats, including graphs, tables, and dashboards, for comprehensive analysis.

이미지 6.1: 이상view of diagnostic functions available for Yamaha watercraft and outboard engines.

Image 6.2: The MR500 provides comprehensive data presentation through graphs, tables, dashboards, output reports, and data freeze frames.

6.3 특수 기능

The MR500 offers over 15 special functions to assist with maintenance and component testing. Access these functions through the 'Special Functions' menu.

• 활성 테스트: Send commands to activate specific components (e.g., ignition coil, injector, electric fuel pump) to verify their functionality.
• Tilt Limiter Set: Adjust or reset the tilt limiter settings.
• Oil Change Table: Access information related to oil change procedures.
• Remote Control System Reset: Reset the remote control system.
• Engine Records: View historical engine data.
• Rotor Reset (FWM): Perform rotor reset procedures.
• Oil Change Records: Access records of previous oil exchanges.
• SCU Configuration: Configure the System Control Unit.
• Initial Learning: Perform initial learning procedures for various systems.
• RIDE Bucket Learning: Conduct learning procedures for the RIDE bucket system.
• Transmission Test: Perform tests on the transmission system.

Image 6.3: The MR500 offers over 15 special functions for comprehensive maintenance and system adjustments.

Image 6.4: The Active Test function allows verification of specific component functionality by sending activation commands.

7. 유지관리

• 소프트웨어 업데이트: The MR500 includes a free one-year software update. Connect the device to a computer with internet access and use the provided update software to ensure the tool has the latest diagnostic data and features.
• 청소: 부드럽고 마른 천을 사용하여 기기를 닦으세요. 연마성 세척제나 용제는 사용하지 마세요.
• 저장: Store the tool in its protective case in a dry, cool environment when not in use.

8. 문제 해결

• 장치 전원이 켜지지 않음: Ensure the battery is charged or the device is connected to a stable power source via the USB cable.
• 연결 문제: Verify that the diagnostic cable is securely connected to both the MR500 and the vehicle's diagnostic port. Ensure the vehicle's ignition is on.
• 코드를 읽을 수 없습니다: Confirm vehicle compatibility and that the correct vehicle model and year have been selected in the tool's menu. Check for any damaged cables.
• 소프트웨어 업데이트 실패: Ensure a stable internet connection and sufficient storage space on the device. Restart the update process if necessary.

9. 사양

10. 지원

For technical assistance, warranty information, or further inquiries, please contact ANCEL customer support. The product includes 24/7 email support and a free one-year software update.

Please refer to the official ANCEL web가장 최신 연락처 정보는 해당 사이트나 구매 문서를 참조하세요.