FOHERE 6.5L Ultrasonic Cleaner (Model JX-031S) Instruction Manual

1. 서론

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your FOHERE 6.5L Ultrasonic Cleaner, Model JX-031S. Please read it thoroughly before using the appliance and retain it for future reference.

The FOHERE 6.5L Ultrasonic Cleaner is designed for professional and household use, offering deep and efficient cleaning for various items such as tools, jewelry, glasses, and small engine parts. It utilizes high-frequency sound waves to create cavitation bubbles in the cleaning solution, which gently yet powerfully dislodge contaminants from surfaces.

Figure 1: FOHERE 6.5L Ultrasonic Cleaner, Model JX-031S.

2. 안전 지침

경고: 이러한 안전 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상이 발생할 수 있습니다.

• 수위: Ensure the water level in the tank is always over 2/3 of its capacity during operation to prevent damage to the unit.
• No Liquid Operation: Never operate the unit without liquid in the tank.
• 뜨거운 액체 주의: Be cautious when handling hot water and the lid to avoid the risk of scalding.
• 접지: Always ensure the appliance is correctly grounded to prevent electric shock.
• 인화성 액체: Do not pour flammable liquids into the tank.
• 전원 차단: Disconnect the power cord from the outlet before cleaning or servicing the unit.
• 감독: 작동 중에는 기기를 방치하지 마십시오.
• 어린이들: 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 제품 오버view

The FOHERE JX-031S Ultrasonic Cleaner features a robust design and intuitive controls for effective cleaning.

주요 특징:

• High-Power Quad Transducer System: Equipped with four industrial-grade 60W ultrasonic transducers (total 180W) for intense and uniform cavitation.
• Precision Heating System: A built-in 200W heater allows temperature adjustment up to 176°F (80°C) for enhanced cleaning.
• 대용량 탱크: A 6.5L (1.7-gallon) tank made from durable 304 stainless steel.
• Smart Drainage: Integrated side faucet for easy dirty water drainage.
• 디지털 제어판: Clear LED display for precise time (0-30 mins) and temperature (up to 176°F in 1°F steps) control.
• 부속품: Includes a detachable stainless steel basket.

Figure 2: Power and Transducer System Overview.

Figure 3: Digital Control Panel for precise operation.

4. 설정

1. 놓기: Place the ultrasonic cleaner on a stable, level, and dry surface. Ensure it is near a grounded electrical outlet.
2. 전원 연결: Connect the power cord to the appliance and then to a grounded electrical outlet. Ensure the main power switch (located at the back) is in the OFF position before plugging in.
3. 채우기 탱크: Open the lid and fill the stainless steel tank with water or an appropriate cleaning solution. Ensure the liquid level is above the MIN mark and below the MAX mark, covering the items to be cleaned, but never exceeding 2/3 of the tank's capacity.
4. 장바구니에 담기: Place the stainless steel cleaning basket into the tank.
5. 로드 항목: Carefully place the items to be cleaned into the basket. Ensure items are not directly touching the bottom of the tank to allow for optimal ultrasonic wave distribution.

Figure 4: Stainless steel tank and cleaning basket.

5. 사용 설명서

초음파 세척기를 작동하려면 다음 단계를 따르십시오.

1. 전원 켜기: Flip the main power switch (located at the back of the unit) to the ON position. The digital display will illuminate.
2. 설정 온도: Press the 'TEMP+' or 'TEMP-' buttons to adjust the desired cleaning solution temperature. The temperature can be set up to 176°F (80°C). Preheating is recommended for tasks requiring higher temperatures to optimize cavitation.
3. 타이머 설정 : Press the 'TIME+' or 'TIME-' buttons to set the desired cleaning duration. The timer can be set from 0 to 30 minutes.
4. 청소 시작: Press the 'ON/OFF' button under the 'ULTRASONIC' section to start the ultrasonic cleaning process. The ultrasonic indicator light will turn on.
5. 가열 기능: If heating is desired, press the 'ON/OFF' button under the 'HEATING' section. The heating indicator light will turn on.
6. 진행 상황 모니터링: The digital display will show the set temperature and actual temperature, as well as the remaining cleaning time.
7. 사이클 종료: The unit will automatically stop the ultrasonic process once the timer counts down to zero. You can manually stop the process at any time by pressing the 'ON/OFF' buttons for ultrasonic and heating.
8. 배수: After cleaning, turn off the unit. Open the drain valve located on the side to empty the dirty cleaning solution. Close the valve once the tank is empty.

도움이 되는 팁:

For optimal cleaning, especially for items with heavy grease or contaminants, consider preheating the solution to the recommended temperature before starting the ultrasonic cycle. The 40kHz frequency ensures deep cleaning without damaging sensitive surfaces.

6. 유지관리

정기적인 유지관리를 통해 초음파 세척기의 수명과 최적의 성능을 보장할 수 있습니다.

• Draining and Cleaning Tank: After each use, especially with dirty solutions, drain the tank completely using the side valve. Rinse the tank with clean water and wipe it dry with a soft cloth. Do not use abrasive cleaners or scrubbers.
• 외부 청소: 광고로 장치의 외부를 닦습니다.amp 천으로 닦아주세요. 제어판이나 전기 부품에 물이 들어가지 않도록 주의하세요.
• 바구니 청소: Clean the stainless steel basket as needed to remove any residue.
• 저장: Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry before storage.

Figure 5: Design features for durability and ease of use, including non-skid feet and drain.

7. 문제 해결

If you encounter issues with your FOHERE Ultrasonic Cleaner, refer to the following common problems and solutions:

8. 사양

Detailed specifications for the FOHERE 6.5L Ultrasonic Cleaner (Model JX-031S):

그림 6: 제품 치수 및 패키지 내용.

9. 보증 및 지원

The FOHERE 6.5L Ultrasonic Cleaner (Model JX-031S) comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact FOHERE customer service directly.

For further assistance, please visit the official FOHERE web해당 웹사이트를 방문하거나 구매 시 제공된 연락처 정보를 통해 지원팀에 문의하십시오.