Aninerel 3.6kW Hybrid Solar Inverter (48V DC to 110V AC) Instruction Manual

1. 서론

This manual provides essential information for the safe and efficient operation of your Aninerel 3.6kW Hybrid Solar Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference. This inverter is designed to convert 48V DC power to 110V AC pure sine wave power, suitable for various on-grid and off-grid applications.

이미지 1: 이상view of the Aninerel 3.6kW Hybrid Solar Inverter, showcasing its main features including battery compatibility, grid connection, power scaling, versatile design, flexible settings, and wireless communication.

2. 안전 지침

감전, 화재 또는 부상의 위험을 줄이려면 항상 다음 안전 예방 조치를 준수하세요.

• 적격 직원: 설치 및 유지관리는 자격을 갖춘 인력만이 수행해야 합니다.
• 실내 사용: This product is designed for indoor use. It is forbidden to use it outdoors.
• 통풍: Ensure adequate ventilation around the inverter. Maintain at least 8 inches of clear space on all sides for proper airflow.
• 배터리 연결: Always connect the battery to the inverter first before connecting solar panels or AC input.
• 접지: 감전 사고를 예방하기 위해 인버터가 제대로 접지되었는지 확인하십시오.
• 비상 정지: Familiarize yourself with the emergency shutdown procedures.
• 과부하 보호: The inverter includes built-in protections against overvoltag전자, 언더볼tage, reverse polarity, and short circuits.

Image 2: A warning label emphasizing that the inverter is an indoor product and should not be used outdoors.

3. 주요 특징

• 3600W Hybrid Solar Inverter: Converts DC 48V to pure sine wave AC 110V, delivering 3,600W continuous and 7,200W peak output. Supports up to 4,500W PV input with 80A MPPT solar charging, maximum DC voltage 300V. Features 40A max AC input, 50/60Hz output frequency, starting voltage above 125VDC, and 80A maximum PV charging current.
• Built-in 80A MPPT Solar Charging Controller: Maximizes solar energy harvesting, boosting charging efficiency by up to 30%. Compatible with high-voltage PV arrays (up to 300VDC).
• 병렬 지원: Supports parallel connection of up to 6 units for increased power (up to 21.6KW). Offers 120V single-phase, 120V/240V split-phase, and 208V three-phase output configurations.
• Smart LCD Screen with Real-Time Monitoring: Responsive LCD screen and indicator LEDs for real-time monitoring of power input/output, battery status, and system alerts. Intuitive control buttons for system settings.
• Flexible Charging & Output Modes: Four charging modes (Solar Only, AC Priority, Solar Priority, Hybrid Charging) and three output modes (Mains Priority, PV Priority, Inverter Output).
• 48V Battery & No-Battery Operation: Compatible with AGM, GEL, Lead-acid, Li-ion, and LiFePO4 48V batteries. Supports no-battery mode for direct solar-to-load applications.
• Rugged IP65 Dustproof & Durable Design: Built to withstand harsh environments with IP65-rated enclosure for indoor or semi-outdoor use. Features smart cooling with a variable speed fan.
• 광범위한 응용 분야: Suitable for RVs, camping boats, home emergency situations, powering various appliances.

Image 3: Visual representation of the inverter's versatile design, showing single-phase, split-phase, and three-phase parallel connection options for up to six units.

4. 설정 및 설치

4.1 풀기 및 검사

Carefully unpack the inverter and all accessories. Inspect for any damage during transit. The package should include the inverter, instruction manual, installation toolkit, current sharing detection line, parallel cable, anti-reverse current CT, and WiFi module.

Image 4: Contents of the product package, including the inverter, manual, installation toolkit, various cables, and a WiFi module.

4.2 구성 요소 식별

인버터의 외부 구성 요소와 연결 지점을 숙지하십시오.

1. 표시등
2. LCD 화면
3. 터치키
4. 과부하 보호 장치
5. 접지 나사 홀드
6. AC 출력 포트
7. WiFi 포트(선택 사항)
8. AC 입력 포트
9. RS485-2 통신 포트
10. RS485-1 통신 포트
11. USB 통신 포트
12. 냉각팬
13. ON/OFF 로커 스위치
14. 건식 접촉 포트
15. 전류 공유 포트(병렬 모듈만 해당)
16. 병렬 통신 포트(병렬 모듈만 해당)
17. 배터리 포트
18. PV 포트

Image 5: Detailed diagram identifying all external ports and features of the inverter.

4.3 배선 연결

안전하고 올바른 배선을 위해 다음 단계를 따르십시오.

1. 배터리 연결: Connect the 48V battery to the designated battery ports (BAT+ and BAT-). Ensure correct polarity.
2. PV 입력: Connect your solar panel array to the PV ports (PV+ and PV-). Ensure the PV voltage is within the specified range (90-260Vdc MPPT range, max 300Vdc open circuit).
3. AC 입력/출력: Connect AC input from the grid or generator to the AC IN ports. Connect your loads to the AC OUT ports.
4. 접지: Connect the grounding wire to the grounding screw hold.

Image 6: A comprehensive wiring diagram showing connections for PV input, utility/generator input, battery, and inverter output.

권장 전선 크기:

연결	Recommended Wire Diameter	최대 전류
교류 입력	10mm²/7AWG	40A
배터리 입력	25mm²/3AWG	120A (Charge) / 85A (Discharge)
교류 출력	10mm²/7AWG	30A (Inverter) / 40A (Bypass)

4.4 Parallel Installation (Optional)

For increased power, up to 6 units can be connected in parallel. Refer to the detailed wiring diagrams for single-phase, split-phase, and three-phase configurations in the full manual. Ensure all units are properly synchronized.

Image 7: Detailed illustration of single-phase, split-phase, and three-phase parallel connection setups for multiple inverters.

5. 운영

5.2 LCD 디스플레이 및 설정

The LCD screen provides real-time data and allows configuration of various parameters. Use the control buttons (SET, UP, DOWN, ENTER) to navigate menus and adjust settings.

• 충전 우선순위: Control how the battery bank is charged from different power sources (Solar Priority, Solar and AC input, Solar Only).
• Load Priority: Control how appliances are powered to prevent power interruptions (Solar Priority, AC Priority, DC Priority).

Image 8: The inverter's LCD screen showing options for Charging Priority and Load Priority settings.

5.3 Wi-Fi 모니터링

The inverter is equipped with a Wi-Fi module for real-time monitoring via a mobile application. 검색 "Smart Value" in your app store to download and install the application. This allows remote monitoring of the inverter's operating status.

Image 9: Illustration of the Wi-Fi module connection and the availability of the "Smart Value" mobile application for real-time monitoring.

6. 유지관리

• 정기 청소: Keep the inverter clean and free from dust. Ensure ventilation openings are not blocked.
• 연결 확인: 모든 전기 연결부의 조임 상태와 부식 징후를 주기적으로 점검하세요.
• 배터리 상태: Monitor battery status via the LCD or mobile app. Ensure batteries are maintained according to their manufacturer's guidelines.
• 펌웨어 업데이트: 최적의 성능과 새로운 기능 이용을 위해 펌웨어 업데이트를 확인하십시오.

7. 문제 해결

이 섹션에서는 일반적인 문제에 대한 해결책을 제공합니다. 더 복잡한 문제는 고객 지원에 문의하세요.

• 전원 출력 없음: Check battery connections, PV input, and AC input. Ensure the inverter is powered on and not in fault mode.
• 오류 표시기 켜짐: Refer to the LCD display for specific fault codes and consult the detailed troubleshooting section in the full manual.
• 배터리가 충전되지 않음: Verify PV panel connections and sunlight availability. Check charging mode settings.
• 과부하 보호: If an overload occurs, the inverter will shut down. Reduce the load and restart the inverter.

Video 1: This video demonstrates how to communicate with the battery and computer for the 5000W Solar Inverter. While the model differs slightly, the communication principles for battery and computer interaction are similar and can aid in troubleshooting.

8. 사양

Image 10: A table summarizing the technical specifications of the inverter, including power ratings, voltage, 전류 및 통신 기능.

9. 보증 및 지원

For warranty information and technical support, please refer to the official Aninerel web웹사이트를 방문하거나 공인 대리점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

확장된 보장 범위에 대한 보호 계획이 제공됩니다.

• 2년 보호 계획
• 3년 보호 계획
• Complete Protect: 하나의 플랜으로 모든 적격 과거 및 미래 구매를 포괄합니다.